• 대한의용생체공학회:의공학회지
• /
• 제22권4호
• /
• pp.321-330
• /
• 2001

In this paper, we propose a new synthetic aperture focusing scheme for improving the lateral resolution which is one of the most important factors determining the quality of ultrasound imaging. The proposed scheme enables full round-trip dynamic focusing with approximately limited property. This properties are obtained through transmitting plane waves of which the traveling angle varies with the receive subaperture position, as opposed to stepping the spherical wave source across an array in other synthetic aperture focusing schemes, and employing dynamic focusing in receive. In this paper, the properties of the proposed scheme is analyzed in which a hypothetical infinite line source is used to transmit the plane waves and verified through computer simulation results. Also, we show that the proposed scheme is realizable with an array transducer with a finite aperture size. In summary, it is shown through comparison between the field contours of the proposed scheme and the conventional scheme that the proposed scheme can improve greatly the lateral resolution of ultrasound imaging.

• ETRI Journal
• /
• 제30권4호
• /
• pp.535-545
• /
• 2008

This paper introduces a systematic top-down and bottom-up design methodology to assist the designer in the implementation of continuous-time (CT) cascade sigma-delta (${\Sigma}{\Delta}$) modulators. The salient features of this methodology are (a) flexible behavioral modeling for optimum accuracy-efficiency trade-offs at different stages of the top-down synthesis process, (b) direct synthesis in the continuous-time domain for minimum circuit complexity and sensitivity, (c) mixed knowledge-based and optimization-based architectural exploration and specification transmission for enhanced circuit performance, and (d) use of Pareto-optimal fronts of building blocks to reduce re-design iterations. The applicability of this methodology will be illustrated via the design of a 12-bit 20 MHz CT ${\Sigma}{\Delta}$ modulator in a 1.2 V 130 nm CMOS technology.

• Journal of the Optical Society of Korea
• /
• 제8권1호
• /
• pp.34-52
• /
• 2004

Over the past decade the experimental technique of THz time domain spectroscopy (㎔- TDS) has proved to be a versatile method for investigating a wide range of phenomena in the ㎔ or far infrared spectral region from 100 ㎓ to 5 ㎔. This paper reviews some recent results of the Ultrafast ㎔ Research Group at Oklahoma State University using ㎔-TDS as a characterization tool. The experimental technique is described along with recent results on ㎔ beam propagation and how ㎔ beam profiles arise from propagation of pulse fronts along caustics. To illustrate how spatio-temporal electric field measurements can determine material properties over a wide spectral range, propagation of ㎔ pulses through systems exhibiting frustrated total internal reflection (FTIR) are reviewed. Finally two potential metrology applications of ㎔-TDS are discussed, thin film characterization and non-destructive evaluation of ceramics. Although ㎔-TDS has been confined to the research laboratory, the focus on application may stimulate the adoption of ㎔- TDS for industrial or metrology applications.

• 한국환경과학회지
• /
• 제1권1호
• /
• pp.29-39
• /
• 1992

A study on acidity in precipitation was carried out during May 1990 - April 1991 at two sites in Chongwon, Choongbook. We observed variations of pH from 4.0 to 7.0. Annual mean value of pH was 5.21 in the area. In particular, strong acidity of rain fall, pH 4.0 were observed during winter to early spring. Neutral values were observed during June to July and were due to wet deposition of atmospheric pollutants by stationary fronts in the rainy season. Interestingly, acidity of snow observed in winter was neutral and it was weaker than the acidity of rain in winter by a value of 2.0. Discussion is made on meteorological and chemical analyses and seasonal variations of acidity of precipitation.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.95-96
• /
• 2013

Numerical simulations are conducted to investigate the mechanism of spontaneous ignition of hydrogen within a certain length of downstream pipe released by the failure of pressure boundaries of various geometric assumption. The results show that local ignition is developed in limited area such as boundary layer and the mixing of hydrogen and air is weak at the planar pressure boundary conditions, whereas the flame fronts at the contact region are developed at the pressure boundaries of the spherical shape.

• 한국농림기상학회지
• /
• 제4권3호
• /
• pp.169-174
• /
• 2002

When the long - lasting stationary fronts were pushed northward by the Pacific Highs in late July, mostly clear skies with intermittent showers were a typical weather of August in Korea. However, torrential rains and flash floods are now a seasonal event of August in recent years. Some meteorologists suspect this unusual phenomenon might be connected with the global change and are concerned about the possibility of change in summer climatic pattern in Korea. August of year 2002 must be remembered to be one of the record breaking months with respect to the rainfall events. In this paper, we analyzed the weather and crop data nationwide for August in 2002, and suggest a few countermeasures necessary to overcome the wet and cool summer impacts on agricultural sector.

• Nuclear Engineering and Technology
• /
• 제42권4호
• /
• pp.414-425
• /
• 2010

In this paper, a procedure is developed for identifying a number of representative solutions manageable for decision-making in a multiobjective optimization problem concerning the test intervals of the components of a safety system of a nuclear power plant. Pareto Front solutions are identified by a genetic algorithm and then clustered by subtractive clustering into "families". On the basis of the decision maker's preferences, each family is then synthetically represented by a "head of the family" solution. This is done by introducing a scoring system that ranks the solutions with respect to the different objectives: a fuzzy preference assignment is employed to this purpose. Level Diagrams are then used to represent, analyze and interpret the Pareto Fronts reduced to the head-of-the-family solutions.

• 천문학회보
• /
• 제44권1호
• /
• pp.50.3-50.3
• /
• 2019

The EUV wave is a disturbance that has been believed to be the fast-mode (shock) wave, which can propagate passing through magnetic field lines. After the passage of EUV waves, coronal streamers start to show kink-mode oscillations, and the footpoints, i.e., magnetic separatrices, of the oscillating streamers are observed as the so-called stationary front. We compare the stationary front observed by EUV imagers and coronal streamers observed in coronagraphic images. We analyze the successive events occurred in September 2011. We find that the stationary fronts are consistent with the coronal streamer boundaries, and they are located along the boundaries of coronal holes and active regions. Our results confirm that EUV waves are in fact fast-mode waves and demonstrate that the stationary front is a promising tool to probe into the source of slow solar wind that is the boundary of coronal streamers on the solar surface.

• Structural Engineering and Mechanics
• /
• 제72권4호
• /
• pp.503-512
• /
• 2019

The construction of segmental precast concrete bridge is an increase due to its superior performance and economic advantages. This type of bridge is appropriate for spans within 30 to 150 m (100 to 500 ft), known as mega-projects and the design optimization would lead to considerable economic benefits. A box-girder cross section superstructure of balanced cantilever construction method is assessed here. The depth of cross section, (variable along the span linearly), bottom flange thickness, and the count of strands are considered as design variables. The optimum design is characterized by geometry, serviceability, ductility, and ultimate limit states specified by AASHTO. Genetic algorithm (GA) is applied in two fronts: as to the saving in construction cost 8% and as to concrete volume 6%. The sensitivity analysis is run by considering different parameters like span/depth ratio, relation between superstructure cost, span length and concrete compressive strength.

• 한국정밀공학회지
• /
• 제10권4호
• /
• pp.248-254
• /
• 1993

This paper proposes the labeling method for solving bin-picking problem in robot vision. It has the processing steps such as image thresholding, region labeling, and moment computation. To determine a target object from object, the modified labeling method is used to. The moment concept applied to determine the position and orientation of target object. Finally, some experiment result are illustrated and compared with the results of conventional shrinking algorithm and collision fronts algorithm. The proposed labeling method has reduced processing time.