• 한국전문물리치료학회지
• /
• 제18권3호
• /
• pp.26-37
• /
• 2011

Although there have been various studies related to the body's movement from a sitting to a standing position (sit-to-stand task), there is limited information on the kinematic changes on the frontal and transverse planes. The purpose of this study was to ascertain how pelvic tilt affects kinematic changes in the frontal and transverse planes in the hip and knee joints during a sit-to-stand task. For this study, 33 healthy participants (13 female) were recruited. Each participant rose from a sitting to a standing posture at his or her preferred speed for each of three different pelvic tilt trials (anterior, posterior, and neutral), and the measured angles were analyzed using a 3-D motion analysis system. A one-way repeated measure analysis of variance was performed with Bonferroni's post hoc test. In addition, an independent t-test was carried out to determine the sex differences in hip and knee joint kinematic changes during the sit-to-stand tasks. The results were as follows: 1) The hip and knee joint angle in the frontal and transverse planes showed a significant difference between the different pelvic tilt postures during sitting in the pre-buttock lift-off phase (pre-LO) (p<.05). Compared to the posterior pelvic tilt posture, the anterior pelvic tilt posture involved significantly greater hip joint adduction and internal rotation, knee joint adduction, and reduced internal rotation of the knee joint. 2) Sex differences were found with significant differences for males in the initial and maximal angles in the frontal plane of the hip and knee joint (p<.05). Females had a significantly smaller initial abduction angle of the hip joint and a significantly greater maximal angle of the hip adduction joint. These results suggest that selecting a sit-to-stand exercise for pelvic tilt posture should be considered to control abnormal movement in the lower extremities.

• 한국의류학회지
• /
• 제32권4호
• /
• pp.553-561
• /
• 2008

The purpose of this research was to analyze the relationship between the ease of crotch depth and the mobility of leg movement. Ten Korean men were participated as subjects and 0. 3, 6cm of crotch ease were inserted for test clothes. To analyze objectively, range-of-motion of four selected movements was measured by Leighton flexometer and goniometer. Also. wearer acceptability rating was measured for subjectively investigation. Anova and Duncan's range tests were used for statistical analysis. According to the results, 3cm of crotch ease was most comfortable. The mobility of test clothes with 3cm crotch ease was improved largely in every test movement(16.2% and 16.6% in segittal plane, and 6.1% and 6.2% in frontal motion).

• 한국운동역학회지
• /
• 제19권2호
• /
• pp.265-272
• /
• 2009

발목 테이핑은 상해 예방을 위해 임상적으로 이용되어 질 수 있는 보조적 수단으로 여겨지고 있다. 그러나 그동안의 연구들을 살펴보면 발목 자체에 대한 부분만을 언급하였다. 본 연구의 목적은 발목 테이핑의 적용이 기능적 발목 불안정성을 가진 선수들에게서 점프 후 착지 시에 하지 관절에 미치는 영향을 알아보는데 있다. 점프의 거리는 각 대상자 키의 50%로 결정하였으며 높이는 각 대상자 키의 20%로 결정하였다. VICON을 이용하여 하지관절의 데이터를 수집하였고, 점프 착지 동안 시상면, 관상면, 수평면의 관절 움직임의 변화를 측정하였다. 테이핑은 통계적으로 시상면에서 착지순간 저측 굴곡과 최대 저측 굴곡을 제한하는 효과가 있었으며, 반면에 착지순간 무릎 굴곡과 최대 무릎 굴곡, 착지순간 엉덩 굴곡과 최대 엉덩 굴곡을 통계적으로 유의하게 증가시키는 효과가 있었으며, 관상면에서는 최대 발목 내번, 착지순간 무릎 외반과 최대 무릎 외반, 최대 엉덩 외전을 감소시키는 효과가 있었고, 수평면에서는 최대 발목 외전, 최대 엉덩 내회전의 감소를 보였다. 발목 테이핑은 발목 관절 운동범위의 제한과 함께 무릎 관절이나 엉덩 관절에 영향을 미치는 것으로 나타났다.

• The Journal of Korean Physical Therapy
• /
• 제24권4호
• /
• pp.276-281
• /
• 2012

Purpose: The purpose of this study is to compare the kinematic motion of the first metatarsophalangeal (MTP) joint during an electrical stimulation of abductor hallucis (AbdH) muscle, between the normal group and the hallux valgus (HV) group. Methods: A total of twenty subjects (normal group=10 and HV group=10) participated in this study. The kinematic motions of first MTP joint was measured by using 3-dimensional motion analysis during an electrical stimulation in the sitting position. The intensity of an electrical stimulation was set to be tolerated in each subject, and the data of kinematic motions were collected in three trials of 5 seconds. An independent t-test was used to compare the angle of flexion and abduction of the first MTP joint and proximal phalanx in frontal plane, between the normal and HV groups. Results: Participants showed that the angle of flexion was significantly greater in the HV group ($13.12{\pm}10.61^{\circ}$), compared to that of the normal group ($10.17{\pm}2.31^{\circ}$); and the angle of abduction was significantly smaller in the HV group ($10.61{\pm}4.99^{\circ}$) than that of the normal group. Also, the angle of the proximal phalanx in frontal plane was significantly smaller, compared to the normal group ($53.42{\pm}10.70^{\circ}$) (p<0.05). Conclusion: These findings suggest that dysfunction of AbdH muscle is apparent in HV deformity and provide insight into potential risk factors for the development of HV deformity.

• 한국응용과학기술학회지
• /
• 제35권3호
• /
• pp.914-924
• /
• 2018

본 연구는 스탠스 자세와 운동면의 차이가 어깨돌림동작 시 활동근의 %MVIC를 비교분석하여 어깨강화운동을 위한 기초자료를 제공하는데 목적이 있다. 남성 8명을 무선배정하여 두발지지 자세, 한발지지 자세, 런지자세와 이마면, 수평면, 시상면에서 회전동작을 10회씩 수행하였다. 수행 중 가시위근, 가시아래근, 작은원근, 앞세모근, 배곧은근, 척수세움근, 큰가슴근, 넓은등근의 근활성도를 측정하였다. SPSS 22.0 통계프로그램을 사용하여 반복측정 일원분산분석(repeted one-way ANOVA)을 실시하였다. 첫째, 이마면에서 바깥돌림 동작 시 척추세움근은 두발지지 자세와 한발지지 자세보다 런지자세에서 높게 나타났고 안쪽돌림 동작 시 가시위근은 두발지지 자세보다 한발지지 자세, 한발지지 자세보다 런지자세에서 높게 나타났다. 둘째, 수평면에서 바깥돌림 동작 시 앞세모근은 두발지지 자세보다 한발지지 자세과 런지자세에서 높게 나타났고 안쪽돌림 동작 시 가시아래근은 두발지지 자세와 한발지지 자세보다 런지자세에서 높게 나타났으며, 큰가슴근에서는 한발지지 자세보다 두발지지 자세, 한발지지 자세보다 런지자세가 높게 나타났다. 셋째, 시상면 바깥돌림 동작 시 배곧은근은 두발지지 자세보다 한발지지 자세와 런지자세에서 유의하게 높게 나타났다. 안쪽돌림 동작 시 가시위근은 두발지지 자세보다 한발지지 자세와 런지자세에서 높게 나타났고 가시아래근은 두발지지 자세와 한발지지 자세보다 런지자세에서 높게 나타났다. 배곧은근에서 두발지지 자세와 런지자세보다 한발지지 자세에서 높게 나타났고 척추세움근은 한발지지 자세보다 두발지지 자세와 런지자세에서 높게 나타났다. 결론적으로 스탠스와 어깨의 운동면의 차이가 어깨위팔관절의 돌림운동 시 활동근들의 근활성도에 미치는 영향은 스탠스자세와 운동면에 따라서 다른 양상이 나타났으며, 이를 어깨 강화 운동프로그램에 적용한다면 보다 긍정적 효과를 기대할 수 있는 운동프로그램이 될 것으로 생각 된다.

• 대한의용생체공학회:의공학회지
• /
• 제36권5호
• /
• pp.235-239
• /
• 2015

The purpose of this study was to investigate the unstable plate system for the advanced balance ability. 7 male volunteers (age $33.7{\pm}1.2$ years, height $174.7{\pm}3.8cm$, weight $86.0{\pm}3.6kg$, BMI $28.2{\pm}2.0kg/m^2$) performed the partial squat motion on the shape of CAP type(${\cap}$) and BOWL type(${\cup}$) plate system. The range of motion (ROM) and muscle activation were acquired by the motion analysis system and the EMG system. Results of ROMs of the CAP type plate system were shown the widely range of the deviation in the ankle joint on the sagittal plane (sagittal plane - hip joint $10.7^{\circ}$ > $5.4^{\circ}$, knee joint $16.3^{\circ}$ > $6.4^{\circ}$, ankle joint $18.8^{\circ}$ > $6.3^{\circ}$ ; transverse plane - hip joint $3.5^{\circ}$ > $1.8^{\circ}$, knee joint $5.3^{\circ}$ > $3.4^{\circ}$, ankle joint $11.3^{\circ}$ > $5.3^{\circ}$ ; frontal plane - hip joint $0.9^{\circ}$ > $0.5^{\circ}$, knee joint $0.8^{\circ}$ > $0.6^{\circ}$, ankle joint $4.8^{\circ}$ > $3.7^{\circ}$). Muscle activation results of the CAP type plate system were indicated higher in major muscles for balance performance than the BOWL type plate system (vastus lateralis 0.90 > 0.62, peroneus longus 0.49 > 0.21, biceps femoris 0.38 > 0.14, gastrocnemius 0.11 > 0.05). These findings may indicate that the CAP type plate system would expect better effectiveness in perform the balance training. This paper is primary study for developing balance skills enhancement training device.

• 대한의용생체공학회:의공학회지
• /
• 제32권3호
• /
• pp.230-236
• /
• 2011

The aim of this study was to investigate the alteration of lumbar spine and trunk postures on different load-carrying types and amounts under static loading. Two load-carrying types(unilateral carrying: UC vs. bilateral carrying: BC) and four different loads(0, 5, 10, and 15 kg) were randomly tested in this study. Carrying a heavy bag would affect human body posture, specifically lumbar spine curvature, which is considered as one of sources of back problems. Previous studies have not paid attention to the approach of the multisegment model of the lumbar spine and trunk. This study separated two compartments of trunk segment(the lumbar and thorax) in the analysis. The multisegment model of the lumbar spine in addition to Helen-Hayes marker set was used. Eight motion analysis cameras and a force plate were utilized. Ten male subjects(mean mass, $70.6{\pm}3.97$ kg; mean height, $178{\pm}4.18$ m) having no musculoskeletal disease participated in this study. We analyzed trunk angles in three anatomical planes and the spinal curvature in sagittal and frontal planes. Increased loading in both UC and BC significantly resulted in increases in trunk forward lean but only UC induced increases in trunk lateral lean. In addition, increased loading in BC produced flatten lumbar curvature in sagittal plane. As far as coupling motion, subjects tended to use axial rotation of the lumbar spine in transverse plane in response to increased UC loading. Finally, it is concluded that the increased static loading in UC rather than in BC tends to causes combined alterations of the spinal postures(sagittal and transverse planes together), which would be vulnerable to improper mechanical stresses on the spine.

• 대한인간공학회지
• /
• 제16권1호
• /
• pp.29-45
• /
• 1997

This study aims at designing sleeves which are suitable for arm shapes and arm movements. With the samples of of ordinary 24 women aged from 20 to 22, the arm shapes and movements were measured 3-dimensionally using a motion analyzer and a sonic digitizer, and then clasified into three characteristic types (A, B, and C). Our analysis leads to the following conclusion. The factors classifying arm shapes are the length from acromion to posterior armpit point, arm hole length, the cap height, difference in height between anterior and posterior armpit points, armhole circumference, upper arm circumferemce, armhole depth, and underarm circumference. The characteristics of arm type A is that the armhole depth and the length from acromion to posterior armpit point are the largest, while the circumference inbe- tween upper arm and elbow is the smallest among the three arm types. Thus, the large circumference difference between upper and lower arms is the most notable in arm type A. The factors classifying arm shapes for arm type B are the smallest except for the circumference inbetween upper arm and elbow which is larger than that for arm type A. The circumference difference betweemn upper and lower arms is small for arm type B. Arm type C has the smallest armhole depth, while other factors are similar to those for arm type B. In type C, the size of upper arm is comparatively small on the frontal plane, while it is the largest on the sagital plane.

• 대한물리의학회지
• /
• 제14권3호
• /
• pp.21-27
• /
• 2019

PURPOSE: This study examined the changes in the kinematic variables during walking on a downhill ramp according to the shoe heel height. METHODS: The subjects were 10 adult women with no history of musculoskeletal disorders who agreed to participate in the study. Data were collected using a motion analysis system (VICON) consisting of six infrared cameras. The slope was 120 cm in width, 200 cm in length, and 15 in inclination. To confirm the change in gait parameters (stride length, gait speed) and lower extremity joint angle according to the heel heights of the shoes, flat, 5 cm, and 10 cm heel shoes were prepared and walked alternately. RESULTS: As a result, both the stride length and walking speed showed significant differences according to the heel height between flat and 10 cm (p<.05). In the sagittal plane, there was no significant difference in the hip joint and knee joint, but a significant difference was observed in all events in the ankle joint on all heel heights (p<.05). In particular, the heel strike and mid stance events showed significant differences among all height conditions (p<.05). No significant difference was observed in any of the joint angle changes in the frontal plane (p>.05). CONCLUSION: As the shoe heel height increased, the instability increased and efforts to secure the stability were made, leading to a shortened stride length, walking speed, and angle of the ankle joint.

• 한국전문물리치료학회지
• /
• 제18권2호
• /
• pp.1-8
• /
• 2011

The purpose of this study was to investigate the effect of high heeled shoes with the total contact insert (TCI) on the frontal plane of the joints for the lower extremity during the gait. Ten healthy females voluntarily participated in this study and the height of the high heeled shoes was 7 cm. A three-dimensional motion analysis system (VICON) and force plates were used to analyze the movements of the joints for the lower extremities. The results were as follows: There were no significant differences for the angle value on the event of the gait cycle in the maximum eversion and inversion of the ankle joint, the varus and valgus of the knee joint, and the adduction and abduction of the hip joint (p>.05). But, there was a significant difference or the range of motion in the ankle joint (p<.05). The value of ankle and knee moment with a TCI was less than the value for no TCI. And there were significant differences for the moment value of the maximum inversion and eversion on the ankle joint and for the maximum varus and valgus on the knee joint (p<.05). Therefore, a TCI would be effective in stabilizing the joints of the lower extremities and increasing the balance of a body to reduce the injure from a fall during the gait.