• Wind and Structures
• /
• v.11 no.4
• /
• pp.257-273
• /
• 2008

A number of passive aerodynamic drag reduction methods were applied separately and then in different combinations on an intercity bus model, through wind tunnel studies on a 1:20 scale model of a Mercedes Benz Tourismo 15 RHD intercity bus. Computational fluid dynamics (CFD) modelling was also conducted in parallel to assist with flow visualisation. The commercial CFD package $CFX^{TM}$ was used. It has been found that dramatic reductions in coefficient of drag ($C_D$) of up to 70% can be achieved on the model using tapered and rounded top and side leading edges, and a truncated rear boat-tail. The curved front section allows the airflow to adhere to the bus surfaces for the full length of the vehicle, while the boat-tails reduce the size of the low pressure region at the base of the bus and more importantly, additional pressure recovery occurs and the base pressures rise, reducing drag. It is found that the CFD results show remarkable agreement with experimental results, both in the magnitude of the force coefficients as well as in their trends. An analysis shows that such a reduction in aerodynamic drag could lead to a significant 28% reduction in fuel consumption for a typical bus on intercity or interstate operation. This could translate to a massive dollar savings as well as significant emissions reductions across a fleet. On road tests are recommended.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.5
• /
• pp.500-509
• /
• 2013

This study reports a numerical analysis of the internal flow characteristics of the integrated urea-SCR muffler system with the various geometries of the multi-perforated tube which is set up between the muffler inlet and in front of SCR catalysts. The multi-perforated tube is generally used to disperse uniformly the urea-water solution spray and to make better use of the SCR catalyst, resulting in the increased $NO_x$ reduction and decreased ammonia slip. The effects of the multi-perforated tube orifice area ratios on the velocity distributions in front of the SCR catalyst, which is ultimately quantified as the uniformity index, were investigated for the optimal muffler system design. The steady flow model was applied by using a general-purpose commercial software package. The air at the room temperature was used as a working fluid, instead of the exhaust gas and urea-water solution spray mixture. From the analysis results, it was clarified that the multi-perforated tube geometry sensitively affected to the formation of the bulk swirling motion inside the plenum chamber set in front of the SCR catalyst and to the uniformity index of the velocity distribution produced at the inlet of the catalyst.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1572-1577
• /
• 2003

High-power pulsed laser ablation under atmospheric pressure is studied utilizing numerical and experimental methods with emphasis on recondensation ratio, and the dynamics of the laser induced vapor flow. In the numerical calculation, the temperature pressure, density and vaporization flux on a solid substrate are first obtained by a heat-transfer computation code based on the enthalpy method, and then the plume dynamics is calculated by using a commercial CFD package. To confirm the computation results, the probe beam deflection technique was utilized for measuring the propagation of a laser induced shock wave. Discontinuities of properties and velocity over the Knudsen layer were investigated. Related with the analysis of the jump condition, the effect of the recondesation ratio on the plume dynamics was examined by comparing the pressure, density, and mass fraction of ablated aluminum vapor. To consider the effect of mass transfer between the ablation plume and air, unlike the most previous investigations, the equation of species conservation is simultaneously solved with the Euler equations. Therefore the numerical model computes not only the propagation of the shock front but also the distribution of the aluminum vapor. To our knowledge, this is the first work that employed a commercial CFD code in the calculation of pulsed ablation phenomena.

• Journal of the Korean Society of Costume
• /
• v.51 no.4
• /
• pp.31-42
• /
• 2001

The purpose of this study was to develop a large representative data base for character goods marketing strategy. The study was to determine character name awareness in relation to segmented distribution regions and such demographic variables as sex and age. The author also analyzed preferred design. A total of 360 questionnaires were distributed and 359 reliable ones were used for statistical analysis. A SAS statistical package including frequency tables and Chi square test and factor analysis and Kendall′s relation analyses was used. The results are as follow : character name awareness involves "character name decognition" based on asking subjects to identify character names from 50 given names. "Tele-tubbies" was found to be a dominant commercial character name as a result of the recognition test, and "Sailer-moon" was found to be a dominant animation character goods as a result of the recognition test. Character recognition was significantly different in the segmented distribution legions, three age groups and different sex groups. People considered design first in purchasing any character goods, and they considered color second in purchasing them. The most favored part of garment far character to be stitch to was the center front in the T-shirt/dress shirt, the center back in the Jumper/jacket, back pocket in the trousers/skirt. The results of a Chi-square test showed that preferred part in the trousers/skirt of character was related with age variables.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.5
• /
• pp.527-534
• /
• 2015

This paper presents an integrated chassis control with electronic stability control (ESC) and active front steering (AFS) under lateral force constraint on AFS. The control yaw moment is calculated using a sliding mode control. The tire forces generated by ESC and AFS are determined using weighted pseudo-inverse based control allocation (WPCA) in order to generate the control yaw moment. On a low friction road, AFS is not effective when the lateral tire forces of front wheels are easily saturated. To solve problem, the lateral force of AFS is limited to its maximum and the braking of ESC is applied with WPCA. To evaluate the effectiveness of the proposed method, a simulation was performed on the vehicle simulation package, $CarSim^{(R)}$. From the simulation, it was verified that the proposed method could enhance the maneuverability and lateral stability if the lateral force of AFS exceeds its maximum.

• Journal of Information Technology Services
• /
• v.12 no.4
• /
• pp.449-459
• /
• 2013

The software which is used for electronic bulletin boards have shortcomings that the addition of new function and new information's type to the order point software is very difficult, and the aggressive adaption of newly introduced type of media is impossible because the software is developed by custom solution. Eventually new cost and time are required to enhance functionality or performance to software of DID(Digital Information Display). In this paper, we proposed the scheme to package DID's contents and to customize it using plug-in method. We conducted a case study of this scheme. The platform which can install Apps to DID as one of content was designed. Apps can be inserted by plug-in type on DID platform and run separately with DID framework. As a result, We got advantage that various contents, functions and Apps which are drived on Android can be displayed without any restriction and dependency because Apps itself is one of dynamic notice object. This solution increase reusability of Apps or contents, and can be used easily in various places such as airports, stations, terminals, and front desk by customizing.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.12
• /
• pp.1020-1026
• /
• 2005

In the era of ubiquitous computing, human-friendly man-machine interface is getting more attention due to its possibility to offer convenient services. For this, in this paper, we introduce a 'Half-Mirror Interface System (HMIS)' as a novel type of human-friendly man-machine interfaces. Basically, HMIS consists of half-mirror, USB-Webcam, microphone, 2ch-speaker, and high-speed processing unit. In our HMIS, two principal operation modes are selected by the existence of the user in front of it. The first one, 'mirror-mode', is activated when the user's face is detected via USB-Webcam. In this mode, HMIS provides three basic functions such as 1) make-up assistance by magnifying an interested facial component and TTS (Text-To-Speech) guide for appropriate make-up, 2) Daily weather information provider via WWW service, 3) Health monitoring/diagnosis service using Chinese medicine knowledge. The second one, 'display-mode' is designed to show decorative pictures, family photos, art paintings and so on. This mode is activated when the user's face is not detected for a time being. In display-mode, we also added a 'healing-window' function and 'healing-music player' function for user's psychological comfort and/or relaxation. All these functions are accessible by commercially available voice synthesis/recognition package.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.295-301
• /
• 2011

A triple-band transceiver module for 2.3/2.5/3.5 GHz mobile WiMAX, IEEE 802.16e, applications is introduced. The suggested transceiver module consists of RFIC, reconfigurable/multi-resonance MIMO antenna, embedded PCB, mobile WiMAX base band, memory and channel selection front-end module. The RFIC is fabricated in $0.13{\mu}m$ RF CMOS process and has 3.5 dB noise figure(NF) of receiver and 1 dBm maximum power of transmitter with 68-pin QFN package, $8{\times}8\;mm^2$ area. The area reduction of transceiver module is achieved by using embedded PCB which decreases area by 9% of the area of transceiver module with normal PCB. The developed triple-band mobile WiMAX transceiver module is tested by performing radio conformance test(RCT) and measuring carrier to interference plus noise ratio (CINR) and received signal strength indication (RSSI) in each 2.3/2.5/3.5 GHz frequency.

• Journal of Information Display
• /
• v.2 no.4
• /
• pp.34-38
• /
• 2001

We suggested new PDP packaging technology using the direct joint method, which does not need an exhausting hole and tube. The advantages of this method are simple process, short process time and time panel package. To packaging, we drew the seal line of glass frit by dispenser followed by forming the lump, which provide pumping-out path during the packaging process. And, we have performed a pretreatment of glass frit to reduce the out-gases. After which, both front and rear glass plates were aligned and loaded into vacuum packaging chamber. The 4-inch monochrome AC-PDP was successfully packaged and fully emitted with brightness of 1000 $cd/m^2$. Also, glass frit properties for pretreatment condition was investigated by AES and SEM analyses.

• Journal of Digital Convergence
• /
• v.12 no.3
• /
• pp.69-77
• /
• 2014

Because smart televisions (TVs) have various and innovative functions that are different from traditional TVs, consumers are front with a complex decision-making problem when they want to buy a best TV among alternatives made by many TV makers. TV manufactures have developed and announced different types of smart TV models and they need a comparative study for evaluating their characteristics. In this paper, we suggest the Analytic Hierarchy Process(AHP) method for deciding the best smart TVs regarding many selection criteria. The method provides a decision support for consumers who like to purchase a smart TV. We describe criteria affecting the smart TV selection through a literature review and suggest a user testing method in order to derive accurate judgments from consumers. Using the Expert Choice software package, we show a an numerical example how the priority of smart TVs are computed.