• Journal of Korean Society of Transportation
• /
• v.30 no.2
• /
• pp.127-136
• /
• 2012

Multi-car rear-end collision accidents have three categories: sequential collision from the rear which is commonly referred to as chain reaction collision, sequential collision from the front, and mixed-order collision. This paper suggests several effective methods of reconstruction analysis for multi-car rear-end collision accidents. First, by incorporating the traditional empirical method which uses vehicle damage caused by brake dive and passenger injuries, with results of theoretical analysis made within mechanics of rigid body, it is made possible for the method to be put to immediate practical use. A methodology to precisely analyze multi-car rear-end collision accidents was suggested using a simulation program simultaneously with a video event data recorder which is starting to be widely used in domestic vehicles. To go beyond the simple intuitive analysis of the video event data recorder, the simulation analysis based on the results of video analysis was executed to acquire various information, so that the causes and responsibility could be clearly stated.

• Journal of Mechanical Science and Technology
• /
• v.15 no.2
• /
• pp.180-191
• /
• 2001

The widely used spot welded sections of automobiles(hat and double hat shaped section members) absorb most of the energy in a front-end collision. The sections were tested with respect to axial static(10mm/min) and quasi-static(1000mm/min) loads. Based on these test results, specimens with various thicknesses, width ratios and spot weld pitches on the flange were tested at high impact velocity(7.19m/sec and 7.94m/sec) which simulates an actual car crash. Characteristics of collapse have been reviewed and structures for optimal energy absorbing capacity is suggested.

• Journal of the Korean Society of Safety
• /
• v.15 no.4
• /
• pp.20-27
• /
• 2000

The hat shaped section members, spot welded strength resisting structures are the most energy absorbing ones of automobile components during the front-end collision. Under the static axial collapse load in velocity of 10mm/min and quasi-static collapse load in velocity of 1000mm/min, the collapse characteristics of the hat shaped section and double hat shaped section member have been analyzed by axial collapse tests with respect to the variations of spot weld pitches on the flanges. In addition, the quasi-static collapse simulations have been implemented in the same condition to the experiment's using FEM package, LS-DYNA3D. The simulated results have been verified in comparison with these from the quasi-static axial collapse tests. With the computational approaches the optimal energy absorbing structures can be suggested. Simulations are so helpful that the optimized data be supplied in designing vehicles in advance.

• Proceedings of the KSR Conference
• /
• 1999.11a
• /
• pp.519-525
• /
• 1999

This paper describes a crashworthy design for the front structure of KHST (Korean High Speed Train) under the SNCF accident scenario (collision against a movable rigid mass of IS tons at 110 km/h). The front structure designed in a new concept shows good behaviours in crashworthy point of view. It collapses in a progressive and well-controlled fashion. To evaluate the design by considering real situations, the power-car is simulated for accidents collided against a dump truck of 15 tons at 110 km/h. The front end structure of it shows a good response on crashworthiness.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.6
• /
• pp.67-72
• /
• 2012

Novel Front End Module(FEM) with improved pedestrian protection is very important to reduce the severity of pedestrian injury. The FEM needs to have enough space from hood to absorb the energy from any pedestrian collision. In this study, the cooling performance of the FEM to cool the engine was investigated under 25% height reduction. The results indicated that the cooling performance analysis was about 86% level compared to that of the conventional FEM. Also, good qualitative agreement between CFD predictions and experimental measurements was found. This FEM needs the cooling performance enhancement for changed air flow path at the frontal part of vehicle. Therefore, we showed an improved performance using air guide setup and shape modification under the high load condition.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.10
• /
• pp.177-182
• /
• 2003

The front-end side members of automobiles absorb most of the energy in a case of front-end collision. The front-end side members are required to have a high stiffness together with easiness to collapse sequentially to absorb more impact energy. The axial static collapse test (5mm/min) was conducted by using UTM for form different types of members which have different cross section shapes; single hat, single cap, double cap, and double hat. The single hat shaped section member has the typical standard section, which the double hat shape section has a symmetry in the center to have more stiffness. As a result of the test, the energy absorbing characteristic was analyzed for different section shapes. It turned out that the change of section shape influence the absorbing energy, the mean collapse load and the maximum collapse load, and the relation between the change of section shape and the collapse mode.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.7
• /
• pp.1247-1254
• /
• 2009

The purpose of the present study was to compare and analyze the differential effects of in-vehicle electronic device usage types(searching for targeted destinations in navigational purpose, watching TV in entertain purpose, and dialing a cellular-phone in phone-usage purpose) on driver's front-to-rear-end collision avoidance behavior, and to find effective collision warning format for this behavior. The result indicated that (1) the drivers showed more impaired collision avoidance performances when they were asked to search the name of targeted destination than the other task requirements, and (2) auditory warning appeared to be most effective among the other types of warning. In particular, it was suggested that the "Visual-Only" collision warning could induce most undesirable result when the drivers were engaged in both visual and auditory information processing.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.686-693
• /
• 2003

An intensive study was conducted for crashworthiness structural design of recently developed Korean High Speed Train. Two nam design concepts are setup to protect the both crews and passengers from serious injury at heavy collision accidents, and to reduce damages of the train itself at light collision accidents. For occupant protection a collision against a movable 15 tons rigid obstacle at 110 kph and a train-to-train collision at 30 kph were selected as accident scenarios for the heavy collisions based on the train accident investigations. A train-to-train collision at 8 kph was used for the light collisions. The crashworthiness behaviors of KHST have been evaluated numerically using the finite element method. Also, one-dimensional collision analyses show good crashworthy responses in a full rake consist and 3-dimensional shell element analyses do in the front-end structures of the power car. Occupant analyses and sled tests demonstrated that KHST performs well enough to protect occupants under the considered accident scenarios.

• Composites Research
• /
• v.36 no.4
• /
• pp.253-258
• /
• 2023

Although the development of transportation means has realized the right to mobility for the disabled who have difficulty in moving, it can be said that the improvement of the safety of passengers with disabilities that can occur in a car accident is lower than that of ordinary passenger seats. In particular, in the case of a rear-end collision that can occur suddenly, it is a reality that disabled passengers are vulnerable to head and neck injuries. Therefore, in this study, a multi-layer headrest foam that divides the headrest into three parts in the coronal plane was proposed to improve the head and neck injury index of disabled passengers in the vehicle in the event of a rear-end collision of a wheelchair transport vehicle. A range of stress scale factors was selected to give various compressive characteristics of the foam through low-speed rear-end collision analysis through a simple model, and GA optimization was performed by specifying the range as a parameter. Through the optimization result, the phase relationship between HIC and NIC was analyzed according to the compression characteristics of the layers. HIC responded most sensitively to the compression characteristics of the front layer and NIC responded to the compression characteristics of the mid layer, and the compression characteristics of the rear layer showed the lowest. A normal headrest and an optimized multi-layer headrest were placed in the validation model to analyze the low-speed rear-end collision sled test, and HIC and NIC were derived lower in the multi-layer headrest than in the general headrest. The compression behavior of the multi-layer headrest was also clearly shown, and it was verified that the multi-layer headrest was effective in improving the injury index of the head and neck compared to the general headrest.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.95-102
• /
• 1999

Because a driver is located in the front end of KHST, he is most likely to be insured at collision accidents. So, it is very important to design some survival space for the driver. To evaluate the driver's safety of KHST (Korean High Speed Train), the front structure of power car is analysed using PAMCRASH under the SNCF accident scenario(collision against a movable rigid mass 15 ton at 110㎞/h). Because the driver's cab of KHST is a modified version of TGV-K, which is not so strong as to protect him, it turns out to be inadequate to guarantee his survival space. Therefore it is recommended to redesign the driver's cab in a crashworthy point of view like the case of TGV-Duplex or NEC.