• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.11
• /
• pp.983-990
• /
• 2007

In this study, we propose a new pixel edge shape of the fringe field switching(FFS) mode which ensures more stable movement of liquid crystal molecules and higher transmittance at the edge part. the electro optical properties were calculated 3-dimensionally using by commercially available "Techwiz LCD". From the simulation results, we showed that the dynamic stability of liquid crystal molecules was obtained in a new pixel structure. We also revealed that the transmittance of the new pixel structure increased more than 6 % compared to that of the conventional pixel structure.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.10
• /
• pp.914-922
• /
• 2003

The FFS (fringe-field switching) mode was known to exhibit both a wide viewing angle and high transmittance, especially when using a liquid crystal with negative dielectric anisotropy. We have studied cell gap-dependent electrode-optic characteristics of the FFS mode using the LC with negative dielectric anisotropy. In case of a small cell gap of 2 ${\mu}$m, the transmittance at the center of pixel and common electrodes is relatively low because effect of surface anchoring that holds the LC to the initial state is larger than that in a large cell gap of 4 .urn such that the LCs in those regions cannot rotate enough. However, in case of a large cell gap of 4 .urn, the effect of surface anchoring becomes relatively small so that the LCs at the center of pixel and common electrode can be twisted enough by applied voltage, giving rise to high transmittance. Therefore, we can conclude that the light efficiency is dependent on the cell gap.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04b
• /
• pp.136-140
• /
• 2002

투과형 광 시야각 모드의 하나인 Fringe Field Switching (FFS) mode를 반사형 액정 디스플레이소자로 응용하여 전기 광학적 특성을 컴퓨터 시늉 하였다. FFS mode는 액정이 수평으로 균일하게 유지되면서 구동하므로, 시야각에 따른 굴절률 변화 역시 균일하게 유지된다. 이러한 특성 때문에 반사형 FFS mode는 부가적인 위상필름을 쓰지 않고, 액정층과 편광판 1매 만으로도 일정한 수준의 반사형 디스플레이 특성을 얻을 수 있다. 컴퓨터 시늉을 통해 1매 편광판과 액정층, 반사판으로 구성된 Normally Black모드의 셀 구조를 취하고, 셀 간격을 일정하게 유지하면서 액정의 ${\Delta}n$을 변화시켜 특성을 구하는 방식으로 수행하여, 입사광의 파장이 550nm일때 최적의 셀 위상차값으로 $d{\Delta}n$인 $0.1365{\mu}m$를 얻었다. 입사광원을 $0^{\circ}C$로 하고 편광판 투과율이 41%였을 때 정면 반사율은 on시 33.6%, off시 0.14%로 명암대비가 233:1이었다. 특히 시야각은 극각 $60^{\circ}C$이내의 전 방향에서 명암 대비비가 5이상의 특성을 보였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.7
• /
• pp.647-651
• /
• 2005

We studied the external pressure-stable advanced frnge field switching (FFS) pixel design with 3 slit sructue. In this mode, a patterned pixel slit is partitioned into 3 areas, namely, two edges and a center, where the edge slit angle is larger than the center slit angle. Thus the reverse twist region in the pixel edge is reduced comparing to the conventional FFS mode so that the LC dynamics in this region becomes very stable. And also, when the external pressure is applied to the panel at the high voltage, the disclination lines (DLs) were barely intruded into active area. Therefore, the structure is use for the pen based system such as the tablet personal computer (PC), personal digital asistant (PDA).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.279-280
• /
• 2005

We have designed a single gap transflective liquid crystal display (LCD) driven by a fringe electric field and vertical field. The conventional FFS mode does not have an electrode on top substrate, it shows not only slow response time due to weak electric field but also slow discharging problem when electrostatic field is generated after fabricating the cell. To solve these problems, transflective LCD with ITO coated upper substrate was suggested but the transmittance was reduced significantly due to effects from vertical field. Hence, in the present paper, new transflective LCD with ITO coating only in the reflective region was characterized.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.337-338
• /
• 2008

We have studied electro-optic characteristics of a high performance liquid crystal display using Fringe In-plane field Switching (FIS) mode. The strong electric fields cause more liquid crystals to reorient almost in plane above and between the pixel electrodes. As a result, the operation voltage is lower and transmittance is higher than those of Fringe Field Switching (FFS) and In-Plane Switching (IPS) modes. Apparently, the transmittance depends on voltage applied at the configurations of FIS mode which are proposed. Therefore, we have studied certain length of between electrodes for maximum transmittance and light intensity.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.312-313
• /
• 2008

A transflective liquid crystal displays associated with fringe field switching (FFS) mode of new concept is proposed. The device utilizes unique characteristic of the FFS mode in which the rotation angle of LC director is strongly dependent on electrode position in on state. We use the liquid crystal with negative dielectric anisotropy. Also we are look for optimized electrode size and the optimization of pixel electrode width and distance between them, the LC director could rotate about $22.5^{\circ}$ and $45^{\circ}$ depending on electrode positions. Consequently, we get high transmittance and high reflection on the optimized electrode condition. Respectively, a high image quality transflective display with single gap and single gamma characteristics realized.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.11
• /
• pp.1028-1032
• /
• 2005

Liquid crystal (LC) alignment using a photoalignment method by irradiation of polarized ultraviolet (UV) on an alignment layer has been investigated. Photoalignment method exhibits weaker anchoring energy than rubbing method so that we have studied electro-optic characteristics of fringe-field switching (FFS) mode with alignment layers using the photo and rubbing alignment methods. The cell using photo alignment layer shows lower threshold and operation voltage than those using rubbed alignment layer. Also, the former method shows higher transmittance than that of the latter.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05a
• /
• pp.118-122
• /
• 2005

Liquid crystal (LC) alignment using a photoalignment method by irradiation of polarized ultraviolet (UV) on an alignment layer has been investigated. Photoalignment method exhibits weaker anchoring energy than rubbing method so that we have studied electro-optic characteristics of fringe-field switching (FFS) mode with alignment layers using the photo and rubbing alignment methods. The cell using photo alignment layer shows lower threshold and operation voltage than those using rubbed alignment layer. Also. the former method shows higher transmittance than that of the latter.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.6
• /
• pp.633-640
• /
• 2004

We have studied color tracking of a fringe-field driven homogenously aligned nematic liquid crystal (LC) cell with negative dielectric anisotropy and compared it with other devices such as the twisted nematic(TN) and in-plane switching(IPS) modes. According to studies, the TN device shows bluish color at grey scale and even at a low retardation cell it cannot avoid color tracking. The authentic IPS device having cell retardation value of 0.23 ${\mu}{\textrm}{m}$ also shows bluish white color. However, the FFS device shows excellent color tracking characteristics even at high retardation value of the cell while keeping high transmittance and greenish white.