• 비파괴검사학회지
• /
• 제32권1호
• /
• pp.27-33
• /
• 2012

광탄성법은 실험역학에서 응력 또는 변형률을 해석하기 위한 여러 실험방법 중의 하나이며, 다양한 종류의 구조물의 응력 분포를 실험적으로 결정하는 기법이다. 광탄성법은 광탄성 영상의 등색 프린지와 등경 프린지로부터 광탄성 시편에 나타나는 전체의 응력장 분포를 정밀하게 측정할 수 있다. 본 논문에서는 여러 가지 광탄성 기법중 8단계 위상이동법(8-step phase-shifting method)에 관한 이론을 살펴보고, 경사균열이 있는 평판 시편에 인장을 가하여 나타난 광탄성 프린지로부터 경사균열 선단주위의 응력분포를 8단계 위상이동법으로 결정한 후, 이들 결과를 유한요소법(FEM)에 의한 결과와 비교하였다. 8단계 위상이동법을 이용한 실험에 의해 측정된 프린지 차수는 유한요소법에 의한 계산된 프린지 차수값에 근접하였다.

• 한국진공학회지
• /
• 제5권4호
• /
• pp.278-283
• /
• 1996

Field terminator를 이용하여 singl path cylindrical mirror analyser를 제작하였다. 먼저 컴퓨터 모의실험을 바탕으로 CMA의 원통형 전극양단에서 fringing field effect를 최소로 하여 log-scale의 등전위면을 그대로 유지하는 terminator의 전압비와 위치 등을 구하였다. 계산된 전압을 직렬로 연결된 금속산화물저항으로 만든 voltage divider로 field terminator에 직접 인가하여 CMA의 fringing field effect를 줄이는 방법으로 개발하였다. 이 방법으로 제작된 CMA의 분해능이 $\Delta$E/E=0.4% 이상임을 확인하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.320-323
• /
• 2008

In this paper, electro-optical characteristic of Nematic Liquid crystal (LC) with varying temperature in different LCD modes, namely Fringe Field Switching (FFS), In-plane switching (IPS), and Patterned Vertical Alignment (PVA) modes are investigated and compared. Electro optic me asurements suggest that rate of change of transmission with temperature in FFS mode was lowest and much more thermally stable as compared to IPS and PVA m odes. However the electro-optical characteristic of patterned vertical alignment (PVA) mode was most affected by changing temperature. The measured threshold voltage was found to be much more thermally stable in FFS and IPS modes than that of PVA mode.

• 한국전기전자재료학회논문지
• /
• 제18권11호
• /
• pp.1033-1037
• /
• 2005

We have studied on the effect of the operation voltage according to the reverse twist for the different fringe field switching (FFS) structure. The FFS structure with a vertically patterned edge of the pixel electrode (VPP) has lower operation voltage comparing to the one with a horizontally patterned edge of the pixel electrode (HPP). The reason is like that the number of the pattern of the pixel edge for the VPP structure is one third comparing with the HPP structure and thus, there is small reverse twist area for the VPP structure. Actually, the reverse twist disturbs the twist of LC near adjacent active area, result that LCs near there have the unstable dynamics. That is, the operation voltage increases as the reverse twist area increases. Therefore, it is very important to design pixel electrode with a small reverse twist region for the FFS mode.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.399-400
• /
• 2008

The light efficiency of fringe-field switching (FFS) mode when using a liquid crystal (LC) with positive dielectric anisotropy was found to be dependent on the magnitude of dielectric anisotropy, such that the lower dielectric anisotropy, the higher. We studied out not only light efficiency but also response time according to dependence on the magnitude of dielectric anisotropy. Rising and decay time became fast and slow respectively according to decreasing the magnitude of dielectric anisotropy. This paper investigates electro-optical characteristic of FFS mode using LC with a positive dielectric anisotropy dependent on the magnitude of dielectric anisotropy of the LC.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.616-619
• /
• 2009

Color tracking behavior of in the fringe-field switching (FFS) mode using a liquid crystal with positive dielectric anisotropy has been studied. In the in-plane switching and vertical alignment devices, color chromaticity at normal direction changes from bluish to yellowish white linearly with increasing grey levels from dark to white state. Interestingly, abnormal behavior in color tracking is observed in FFS devices using a liquid crystal with positive dielectric anisotropy, that is, it changes from bluish to yellowish up to a certain middle grey level but turns over to bluish white with further increasing from a grey level to a fully white state. In this paper, we analyze this abnormal effect from the calculated and experimental results.

• 한국전기전자재료학회논문지
• /
• 제24권4호
• /
• pp.309-313
• /
• 2011

In this study, we proposed a novel electrode structure for the fringe field switching (FFS) mode LCD and performed a three-dimensional computer simulation to calculate the optical transmittance for the new structure. In the simulation Erickson-leslie equation and Berreman $4{\times}4$ matrix were used for obtaining the director distribution profiles of liquid crystal molecules and the electro-optical characteristics, respectively. Considering the complexity of the motional equation of the liquid crystal molecules, FDM (finite difference method) was used as a numerical method. From the results, We revealed that the light transmission of the newly designed pixel structure is expended to the edge of the pixel electrode. We also confirmed that the light transmittance increased more than 13% compared to that of the conventional electrode structure.

• 한국전기전자재료학회논문지
• /
• 제17권6호
• /
• pp.622-632
• /
• 2004

We have studied how liquid crystal's rubbing direction and voltage driving method affect generation of disclination line. At first, generation of disclination line in vertical alignment(VA) cell and VA-twisted nematic(TN) cell has been examined. When liquid crystal's rubbing direction of bottom substrate was 0$^{\circ}$, the degree of generated disclination line was the smallest value. Further, the generation of disclination line above the electrode is less in the frame inversion than in the line inversion. Secondly, we have examined a generation of disclination line in reflective fringe-field switching cell. When the distance between common electrodes is over 3 ${\mu}{\textrm}{m}$ with on-state of one pixel and off-state of neighboring pixels, the reflectance appears only on-state pixel without generating reflectance in adjacent pixels.

• Journal of Mechanical Science and Technology
• /
• 제15권2호
• /
• pp.172-179
• /
• 2001

The effects of the interface and two holes located near the crack path in the hybrid specimen on the dynamic crack propagation behavior have been investigated using dynamic photoelasticity with the aid of Cranz-Shardin type high speed camera system. The dynamic stress field around the dynamically propagating interface crack tip in the three point bending specimens under a dynamic load applied by a hammer dropped from 0.6m high without initial velocity are recorded. The complex stress intensity factors for the dynamically propagating interface crack are extracted by using a overdeterministic least square method. Theoretical dynamic interface isochromatic fringe loops generated by using the numerically determined complex stress intensity factors are compared with the experimental results. Furthermore, the influence of the hole to the dynamic interface crack velocities has been investigated experimentally.

• 한국광학회지
• /
• 제22권1호
• /
• pp.23-29
• /
• 2011

쌍안정 카이랄 스플레이 네마틱 액정표시소자는 스플레이 상태와 $-\pi$ 꼬인 상태를 쌍안정 상태로 사용하는 메모리 액정표시소자이다. 셀 갭/피치의 값이 0.25일 경우 완전한 쌍안정 상태를 갖지만, $-\pi$ 꼬인 상태에서 스플레이 상태로 전이시키기 위하여 fringe 전계를 인가할 경우 픽셀영역은 전계의 왜곡에 의해서 완전한 스플레이 상태가 아니라 $-\pi$ 꼬인 상태를 부분적으로 유지하게 된다. 본 논문에서는 화소영역에서 두 안정한 상태가 공존하지 않는 $-\pi$ 꼬인 상태를 어두운 상태로 사용하는 반사형 쌍안정 카이랄 스플레이 네마틱 액정표시소자를 제안한다. 제작된 반사형 액정표시소자는 30:1의 고명암비를 나타냈으며, 응답속도는 수직전압 8 V, fringe 전압 12 V의 구동 전압으로 각각 쓰기 응답시간이 950 ms, 리셋 응답시간이 450 ms였다. 또한 제안된 셀은 +C 광학 보상 필름을 사용하여 좌우 방향에서 $180^{\circ}$의 광시야각을 나타냈다.