본 연구에서는 카본블랙 충전제의 입자크기 및 구조에 따른 고무 배합물의 마찰 마모 특성을 고찰하였다. 카본블랙의 입자크기와 구조에 따라 마모속도 및 형상이 다르게 되며, 최적 마모성능을 설계하기 위해서는 충전제의 입자크기와 구조의 마모 영향도를 사용조건에 따라 고려하여야 한다. 충전제의 입자크기와 구조에 따른 마모속도($W_R$) 영향도를 수준별로 고찰하기 위해 본 연구에서는 구조와 입자크기가 다른 10가지의 카본블랙을 선택하여 동일한 양을 천연고무와 배합하였다. 자체 제작한 칼날형 마찰 마모 시험기를 이용하여 마찰 마모 특성을 평가하였고, 카본블랙의 입자크기와 구조의 영향을 고려한 특성인자(${\psi}=\sqrt{{N_2^2}+{DBP^2}}$)와의 관계를 고찰하였다. 마모속도($W_R$)와 마찰일($W_f$)의 간에는 power-law 관계가 있었으며, 마모속도는 카본블랙의 특성인자에 역비례 관계를 보였다. 이는 카본블랙의 입자 크기가 작고 구조가 잘 발달 될수록 마모 저항특성은 향상된다는 것을 나타낸다.
Performance of refrigerant oil at the thrust-bearing and at the journal-bearing of a scroll compressor is a significant factor. This paper presents the friction and anti-wear characteristics of nano oil with a mixture of a refrigerant oil and carbon nano particles in the journal bearing of scroll compressors. The characteristics of friction and anti-wear using nano-oil is evaluated using the disk on disk tester and the journal bearing tester for measuring friction surface temperature and the coefficient of friction at the journal bearing tester. In journal bearing test, the average friction coefficient of high concentration nano-oil was decreased down to 18% compared to raw oil under 4,500 N and 3,600 rpm. It is believed that nano particles can be coated on the wear surfaces and the interaction of nano particles between surfaces can be improved the lubrication in the friction surfaces. Worn surfaces of frictional specimen were measured with straightness. carbon nano oil enhances the characteristics of the anti-wear and friction at the joural bearing of scroll compressors.
Sintered metallic brake pads and low alloy heat resistance steel disks are applied to mechanical brake systems in high energy moving machines that are associated with recently developed 200km/h trains. This has led to the speed-up of conventional urban rapid transit. In this study, we use a lab-scale dynamometer to investigate the effects of the composition of friction materials on the tribological characteristics of sintered metallic brake pads and low alloy heat resistance steel under dry sliding conditions. We conduct test under a continuous pressure of 5.5 MPa at various speeds. To determine the optimal composition of friction materials for 200 km/h train, we test and the evaluate frictional characteristics such as friction coefficients, friction stability, wear rate, and the temperature of friction material, which depend on the relative composition of the Cu-Sn and Fe components. The results clearly demonstrate that the average friction coefficient is lower for all speed conditions, when a large quantity of iron power is added. The specimen of 25 wt% iron powder that was added decreased the wear of the friction materials and the roughness of the disc surface. However when 35 wt% iron powder was added, the disc roughness and the wear rate of friction materials increased By increasing the amount of iron powder, the surface roughness, and temperature of the friction materials increased, so the average friction coefficients decreased. An oxidation layer of $Fe_2O_3$ was formed on both friction surfaces.
The structure and properties of tetrahedral amorphous carbon (ta-C) coatings depend on the main process parameters and bending angles of the magnetic field filter used in the filtered cathodic vacuum arc (FCVA). During the process, it is possible to effectively control the plasma flux of carbon ions incident on the substrate by controlling the arc discharge current, thereby influencing the mechanical properties of the coating film. Furthermore, we can control the size and amount of large particles mixed during carbon film formation while conforming with the bending angle of the mechanical filter mounted on the FCVA; therefore, it also influences the mechanical properties. In this study, we consider tribological characteristics for filtered bending angles of 45° and 90° as a function of arc discharge currents of 60 and 100 A, respectively. Experiment results indicate that the frictional behavior of the ta-C coating film is independent of the bending angle of the filter. However, its sliding wear behavior significantly changes according to the bending angle of the FCVA filter, unlike the effect of the discharge current. Further, upon changing the bending angle from 45° to 90°, abrasive wear gets accelerated, thereby changing the size and mixing amount of macro particles inside the coating film.
Mechanical surface treatment is an excellent approach widely used to modulate and improve the performance and service life of bearings, gears, and frictional joints. The main purpose of this study is to investigate and compare the effect of ultrasonic nanocrystal surface modification (UNSM) and wonder process craft (WPC) on the surface and tribological properties of SUJ2 bearing steel. The surface roughness and hardness of the untreated and treated (UNSM- and WPC-treated) specimens were measured and compared. Their tribological properties were evaluated using a micro-tribometer under grease-lubricated and dry conditions against itself. Surface hardness measurement results revealed that both the UNSM- and WPC-treated specimens had a higher hardness than that of the untreated specimen. The surface roughness of the untreated specimen was reduced after UNSM and WPC treatments. Abrasive wear mode was observed on the surface of the specimens worn under grease-lubricated conditions, while adhesive wear mode was found on the surface of the specimens worn in dry conditions. According to the tribological test results, the friction coefficient and wear rate of the untreated specimens were reduced by the application of both the UNSM and WPC treatments under grease-lubricated and dry conditions.
주철은 산업현장에서 중장비나 철도차량 등과 같은 다양한 기계장치의 주재료로 널리 사용된다. 이러한 기계장치의 운전 성능은 접촉 특성에 따라 크게 좌우되며 이를 개선시키기 위한 연구들이 진행되고 있다. 본 연구에서는 모래와 알루미나 입자가 주철의 마찰/마모 특성에 미치는 영향에 대해 다양한 조건에서의 미끄럼 실험을 통해 규명하였다. 입자의 크기 및 시편 온도 등을 변수로 하여 스틸 볼이 pin 으로 장착된 pin-on-reciprocator 방식의 트라이보테스터를 사용하여 실험을 진행하였다. 주사전자현미경(Scanning Electron Microscope), confocal microscope 와 3d profiler 를 이용해서 주철 시편과 스틸 볼의 마모 표면을 관찰하고 마모량을 정량적으로 측정하여 마모 특성을 파악하였다. 실험 결과 주철의 마찰/마모 특성은 입자 주입에 의해 크게 달라짐을 알 수 있었다. 또한, 주철 시편에 가해준 온도에 따라 마찰/마모 특성이 크게 달라지는 것을 확인하였다. 이 연구의 결과는 산업에서 주철 재료의 트라이볼로지 특성을 이해하는데 도움이 될 것이다.
스플린터(splinter) 및 판상(plate shape) 형상을 가지는 티탄산칼륨염(K2O·nTiO2, PT)을 합성하고 브레이크 마찰재의 보강재로 이용하여 마찰 특성을 평가하였다. 스플린터형 티탄산칼륨염을 합성하기 위하여 먼저 판상 형상을 가지는 사티탄산칼륨염(K2O·4TiO2, PT4)을 합성하고 칼륨 이온(K+)을 일부 산침출(acid leaching)하여 육티탄산칼륨염(K2O·6TiO2, PT6)으로 변환시킨 후, 800℃에서 열처리하여 스플린터 형상의 입자를 얻었다. 판상형 티탄산칼륨염을 합성하기 위해서 염화칼륨을 융제로 사용하고 마그네슘(Mg)을 일부 첨가하여 판상의 형상을 가지는 마그네슘티탄산칼륨염(K0.8Mg0.4Ti1.6O4, PMT)을 합성하였다. 얻어진 육티탄산칼륨염 및 마그네슘티탄산칼륨염 입자를 보강재로 이용하여 브레이크 패드 마찰재를 제작하고 1/ 5-스케일 다이나모미터(scale dynamometer)를 이용하여 마찰 마모 특성을 평가하였다. 평가 결과, 두 종류의 보강재가 유사한 마찰계수 및 Fade & recovery 특성을 보였으며 판상형 마그네슘티탄산칼륨염의 경우, 스플린터형 육티탄산칼륨염보다 우수한 내마모성을 보이는 것을 알 수 있었다.
본 연구에서는 냉간 헤딩 공정에서 성형하중과 펀치 금형의 마모 감소를 통한 펀치 수명 증대를 위해 헤딩용 펀치 형상 최적설계를 수행하였다. 기존 생산에 사용되는 냉간 헤딩 펀치와 성형공정에 대한 유한요소해석 시뮬레이션을 통해 성형하중과 유동 특성 분석, 펀치금형에 집중되는 유효응력 및 마모량에 대하여 분석하였으며, 이를 통해 금형 마모와 밀접한 주요 설계인자를 확인하였다. 펀치금형의 최적설계 변수로서는 펀치 금형 포인트각(Point angle), 에지 반경값(Corner radius), 펀치소재재종(die material type), 마찰계수(friction coefficient) 등의 4가지 변수를 대상으로 4인자 3수준 인자 및 변수 수준을 설정하고, 성형해석 시뮬레이션과 다구찌법을 활용하여 설계인자별 영향도를 분석하여 최적의 최적설계 인자를 결정하였다. 본 연구를 통해 얻어진 최적설계변수를 적용하여 냉간 헤딩용 펀치 최적설계 시뮬레이션 결과, 각 펀치에 발생하는 최대유효응력은 최대 8.9 % 감소 효과를, 최대 펀치 마모 깊이는 37 % 감소 효과를, 성형하중은 평균 20% 수준 의 감소효과를 얻을 수 있었다. 현재, 소성 성형제품군이 적용되는 자동차, 건설 플랜트사에서 요구되는 고품질에 대응하면서도 적정 제조원가 절감을 위한 성형성 개선을 위한 성형공정개발 및 금형설계의 최적화가 지속적으로 필요하며, 향후 연구 결과를 현업에 적용하여 제품 성형성 개선 및 금형수명 증대 관리를 위한 기술자료로 활용하고자 한다.
In the steel making industries, the continuous casting process has been applied to the number of company because of its economical benefit. Casting rolls are utilized for frictional drive and transport of solidifying slap. Dimensional tolerances, mechanical stability and surface condition of the cast roll can affect both the surface and internal quality of the product being cast. To overcome these problems, the industry is accelerating on the rate of technology improvements. Samples were overlaid on the S45C steel by submerged arc welding process. And the hardness, wear, electrochemical corrosion and oxidation tests were carried out. Test results were that all these materials were satisfying basic requirements of caster rolls. By these results, the addition of 0.1%Nb and 0.15%V increase mechanical properties and tempering resistance by its superior carbide forming characteristics in low carbon $12{\sim}13%Cr$ martensitic stainless steels.
The fractal-based method for describing rubbed surface texture has aroused great interest. The determination of rubbed surface topography is believed to be extremely important in the areas of contact mechanics, adhesion and friction. In order to describe topography of the rubbed surface, the wear test was carried out with annular surfaces of wear testing specimens in dry friction. furthermore, the relation between the fractal dimensions and the frictional conditions are also investigated and fractal descriptors was applied to rubbed surface with image processing. Fractal dimension can be determined by sum of intensity difference of image surface pixel. Fractal dimension increased according as the applied load and sliding distance increase. Topography of the rubbed surface can be effectively obtained by fractal dimensions.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.