• 소성∙가공
• /
• 제12권1호
• /
• pp.26-33
• /
• 2003

This paper is concerned with the numerical analysis of frictional contact problems in axisymmetric bodies using the rigid-plastic finite element method. A contact finite element method, based on a penalty function, are derived from variational formulations. The contact boundary condition between two deformable bodies is prescribed by the proposed algorithm. The program which can handle frictional contact problem is developed by using pre-existing rigid-plastic finite element code. Some examples used in this paper illustrate the effectiveness of the proposed formulations and algorithms. Efforts focus on the deformation patterns, contact force, and velocity gradient through the various simulations.

• 한국정밀공학회지
• /
• 제13권2호
• /
• pp.102-109
• /
• 1996

Effects of frictional laws on finite element solutions in metal forming were investigated in this paper. A rigid-viscoplastic finite element formulation was given with emphasis on the frictional laws. The Coulomb friction and the constant shear friction laws were compared through finite element analyses of compression of rings and cylinders with different aspect ratios, ring-gear forging, multi-stage cold extrusion and hot strip rolling under the isothermal condition. It has been shown that two laws may yield quite different results when the aspect ratio of a process and the fractional contact region are large.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.831-836
• /
• 2001

In the case of axisymmetric thermal analysis of drum brakes, the distribution of frictional heat produced on the interface and temperature difference between mating frictional faces are very interesting problems to computational researchers. In this paper, heat conduction from the interface to the pad and the drum was modeled by using a thin interface element, so artificial division of the generated frictional heat between pad and drum is not necessary. Temperature difference between mating frictional faces is successfully modeled by using the interface element. The influence of some parameters on tile thermal stress was checked. The analysis was performed by ABAQUS/Standard code.

• 한국자동차공학회논문집
• /
• 제9권3호
• /
• pp.173-180
• /
• 2001

In the case of axisymmetric thermal analysis of drum brakes, the distribution of frictional heat produced on the interface and temperature difference between mating frictional faces are very interesting problems to computational researchers. In the first part, the influence of the s-cam load angles and elastic modulus of the pad on the contact pressure distribution between pad and drum was checked by a three dimensional model. In the second part heat conduction from the interface to the pad and the drum was modeled by using a thin interface element, so artificial division of the generated frictional heat between pad and drum is not necessary. Temperature difference between mating frictional faces is successfully modeled by using the interface element. The influence of some parameters on the thermal distribution is checked. The analysis was performed by ABAQUS/Standard code.

• 한국소음진동공학회논문집
• /
• 제12권11호
• /
• pp.890-896
• /
• 2002

This paper deals with the dynamic stability of a brake shoe under pulsating frictional forces. A lining part of brake systems is assumed as a distributed spring, and the supported elements of a shoe are assumed as translational springs for a constant distributed frictional force and a pulsating frictional force. Governing equations are derived by the use of the extended Hamilton's principle, and numerical results are calculated by finite element method. The critical distributed frictional force and instability regions were investigated for the change of distributed spring constants and translational spring constants.

• 한국소음진동공학회논문집
• /
• 제11권6호
• /
• pp.216-222
• /
• 2001

The paper presents the dynamic stability of a flexible shoe in drum brake systems subjected to a frictional force. The frictional force between the drum and the shoe is assumed as a distributed frictional force, while the shute is modeled as an elastic beam supported by two translational springs at both ends and elastic foundations. Governing equations of motion are derived by energy expressions, and their numerical results are obtained by employing the finite element method. The critical distributed frictional force and the instability regions are demonstrated by changing the stiffness of two translational springs and elastic foundation parameters. It is also shown that the beam loses its stability by flutter and divergence depending on the stiffness of elastic supports and elastic foundation parameters. Time responses of beams corresponding to their instability types are also demonstrated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.252-255
• /
• 2008

We conduct finite element simulation of a cross-wedge rolling process using AFDEX 3D. The die is realistically modeled with emphasis on the hatched plicate over the slope or forming region. Coulomb frictional law is used to prevent slip between material and die. Constant shear frictional law is also investigated and it is esmphasized that the constant shear frictional law is improper for cross-wedge rolling simulation.

• Tribology and Lubricants
• /
• 제18권3호
• /
• pp.219-227
• /
• 2002

A linear elastic fracture mechanics analysis of double subsurface cracks propagation in a half-space subjected to moving thermomechanical surface traction was performed using the finite element method. The effect of frictional heat at the sliding surface on the crack growth behavior is analyzed in terms of the thermal load and peclet number. The crack propagation direction is predicted in light of the magnitudes of the maximum shear and tensile stress intensity factor ranges. When moving thermomechanical surface traction exists, subsurface horizontal cracks are propagation in-plane crack growth rate at the beginning but they are propagation out-of-plane crack growth rate by the frictional heat which is occurrence by the repeated sliding contact.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제32회 추계학술대회 정기총회
• /
• pp.50-58
• /
• 2000

A linear elastic fracture mechanics analysis of multiful subsurface cracks propagation in a half-space subjected to moving thermomechanical surface traction was peformed using the finite element method. The effect of frictional heat at the sliding surface on the crack growth behavior is analyzed in terms of the thermal load and peclet number. The crack propagation direction is predicted in light of the magnitudes of the maximum shear and tensile stress intensity factor ranges. When moving thermomechanical surface traction exists, subsurface horizontal cracks are propagation in-plane crack growth rate at the beginning but they are propagation out-of-plane crack growth rate by the frictional heat which is occurrence by the repeated sliding contact.

• 한국산학기술학회논문지
• /
• 제18권10호
• /
• pp.817-822
• /
• 2017

제동 장치는 기계장치의 사용자나 시스템의 안전관점에서 가장 중요한 요소 중 하나이며, 작동 조건 내에서 신뢰성 있는 제동력이 유지 되어야 한다. 일반적으로 브레이크는 운동에너지를 마찰을 통해 열에너지로 변환하여 회전하는 기계장치를 제동한다. 운동에너지가 열에너지로 전환되는 과정에서 고온의 열이 발생하여 기계적 거동에 영향을 준다. 마찰열은 브레이크 시스템의 열팽창 및 마찰계수 변화 등에 영향을 주고 제어되지 않는 고온은 브레이크 성능을 저하시킨다. 따라서 브레이크의 발열을 예측하고 이를 제어하는 것은 중요하다. 마찰열을 예측하기 위한 다양한 수치해석 연구들이 수행되었지만, 계산의 효율 및 재원의 한계로 수치해석의 경계조건을 다양한 형태로 가정하여 마찰열 예측 연구를 수행하였다. 가정된 마찰열 거동은 실제 열전달 온도 분포 경황과 차이가 있고 이를 이용한 냉각 효과나 열응력 수치해석 결과의 신뢰성이 부족하다. 이러한 한계점을 극복하고 마찰열 예측 시뮬레이션 절차를 정립하기 위하여 본 연구에서는 열-구조 결합 요소를 사용하여 브레이크 시스템의 마찰열 발생을 직접적으로 모사하는 시뮬레이션을 수행하였다. 본 논문은 Finite Element Method(FEM)을 이용하여 브레이크 작동에 따른 마찰열 발생을 모사하고 열분포 특성을 분석하기 위해 브레이크 모델을 대상으로 열-구조 연성요소를 적용한 수치해석 연구를 수행하였다. 이 연구는 마찰열 직접 모사의 필요성을 제안하고 시뮬레이션에 필요한 정보를 제공할 수 있다 판단된다.