• Tribology and Lubricants
• /
• 제28권3호
• /
• pp.124-129
• /
• 2012

The prediction of fretting wear is a significant issue for the design of contacting mechanical components such as flexible couplings and splines, jointed structures and so on. In our earlier study, we developed a numerical model to predict the fretting wear using boundary element method. The developed algorithm needs experimental fretting wear coefficients and friction coefficients between two moving materials to get more reliable results. In this study, therefore, we demonstrated the measurement method of the fretting wear coefficients and friction coefficients using disk on plate tribometer with piazo actuator and gap sensor. For four different material combinations, the fretting wear coefficients and friction coefficients are acquired through the fretting wear experiment and the analysis of the measured values. Thess results are useful to predict the quantative fretting wear rate in the developed algorithm.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.196-203
• /
• 2000

In this study, the evaluation method of diffusion characteristics of Suspended Soli&SS) and the generation limit(source and thick) are investigated, which is significantly affecting on marine examined by construction works such as dredging and reclamation. Dispersion characteristics of SS is examined by hydraulic tests and numerical works in consideration with the Pusan Port. Hydraulic model test was performed in 2-D wave flume to find the limit wave conditon of re-suspension of solid as well as the time dependent characteristics of settlement The results obtainded in the study are as follows; 1) The quantituative evaluation af SS is the basic parameter of marine environmental impact assessment in related with the port development The SS increases as the water content of sea bed solid increases and the density decreases. 2) The sea bed solid in Sinsundai area, Pusan Port has the water content range of 83~157% 3) The ratio of suspension velocity against settlement velocity is about 0.25 and SS concentration converges as the wave heigh. 4) The SS increases 2 time when time step increases 3 time(10 sec to 30 sec) in numerical simulation It means that the effect of the time step should be checked in detail to stable. The diffusion The diffusion coefficient are Affiected senstively in the dispersion process while sea ved friction coefficinet have not strong relation in the simulated area

• 물과 미래
• /
• 제23권3호
• /
• pp.319-328
• /
• 1990

2차원 하구모델의 매개변수 동정을 BF좌표계로 변환된 ADI-FDM출력 수치모형을 사용하여 수행하였다. 모형에서 기본 방정식을 동수역학식과 수송방정식이 복합된 방정식을 사용하였다. Thompson식이 지배방정식을 사각평면으로 변환 하는데 사용도이ㅓㅆ으며 Thompson의 Elliptic 격자발생기법이 BF 좌표계에서 곡선격자망을 발생하는데 사용되었다. 지배방정식에서 동정될 매개변수는 마찰계수와 분산 정수이다. 출력수치모형은 BF좌표계에서 조석평균 염도 모형이 사용되었다. 최적화 기법으로 영향계수 알고리즘을 적용하였다. 또한 Lumped 모형이 동정에 고려 되었다. 본 연구는 새로운 출력 수치모형이 하구염도 모형의 매개변수 동정에 있어 유용한가를 검토 하는데 중점을 두었다. 제안된 기법은 간단한 가상모형에 실험적인 적용을 통하여 검토되었다. 검토한 결과는 제안된 기법이 하구모형에서 매개변수 동정시 도입될 수 있음을 보여주었다.