• Journal of the Korean Chemical Society
• /
• v.62 no.2
• /
• pp.79-86
• /
• 2018

This study reported the adsorption of Cu(II) ions onto activated carbon prepared from Myristica Fragrans shell (MFS AC) over independent variables of contact time, activating chemical (NaOH) concentration, initial adsorbate concentration, initial pH of adsorbate solution and adsorption temperature. The MFS AC structure, morphology and total surface area were characterized by FTIR, SEM and BET techniques, respectively. The Cu(II) ions adsorption on the MFS AC (activated using 0.5 M NaOH) fitted best to Freundlich adsorption isotherm (FAI), and the FAI constant obtained was 0.845 L/g at $30^{\circ}C$ and pH 4.5. It followed the pseudo first order of adsorption kinetic (PFOAK) model, and the PFOAK based adsorption capacity was 107.65 mg/g. Thermodynamic study confirmed the Cu(II) ions adsorption should be exothermic and non-spontaneous process, physical adsorption should be taken place. The total surface area and pore volume based on BET analysis was $99.85m^2/g$ and 0.086 cc/g, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3391-3398
• /
• 2013

The carboxylated multiwall carbon nanotubes (MWCNT-COOH) and functionalized with isatin derivative (MWCNT-isatin) have been used as efficient adsorbents for the removal of lead (Pb) from aqueous solutions. The influence of variables including pH, concentration of the lead, amount of adsorbents and contact time was investigated by the batch method. The adsorption of the lead ions from aqueous solution by modified MWCNTs was studied kinetically using different kinetic models. The kinetic data were fitted with pseudo-first-order, pseudo-second-order, and intra-particle diffusion models. The sorption process with MWCNT-COOH and MWCNT-isatin was well described by pseudo-second-order and pseudo-first-order kinetics, respectively which it was agreed well with the experimental data. Also, it involved the particle-diffusion mechanism. The values of regression coefficient of various adsorption isotherm models like Langmuir, Freundlich and Tempkin to obtain the characteristic parameters of each model have been carried out. The Langmuir isotherm was found to best represent the measured sorption data for both adsorbent.

• Journal of Environmental Science International
• /
• v.12 no.10
• /
• pp.1061-1069
• /
• 2003

The adsorption behaviors of strontium and cesium ions on fly ash, natural zeolites, and zeolites synthesized from fly ash were investigated. The zeolites synthesized from fly ash had greater adsorption capabilities for strontium and cesium ions than the original fly ash and natural zeolites. The maximum adsorption capacity of synthetic zeolite for strontium and cesium ions was 100 and 154 mg/g, respectively, It was found that the Freundlich isotherm model could fit the adsorption isotherm. The distribution coefficients (K$\_$d/) for strontium and cesium ions were also calculated from the adsorption isotherm data, The distribution coefficients decreased with increasing equilibrium concentration of strontium and cesium ions in solution. By studying the removal of cesium and strontium ions in the presence of calcium, magnesium, sodium, potassium, sulfate, nitrate, nitrite, and EDTA (in the range of 0.01 - 5 mM) it was found that these coexistence ions competed for the same adsorption sites with strontium and cesium ions.

• Journal of Environmental Science International
• /
• v.20 no.11
• /
• pp.1437-1445
• /
• 2011

The adsorption performance of lead ion was studied using five zeolites (Na-P1, sodalite (SOD), analcime (ANA), nepheline hydrate (JBW), cancrinite (CAN)) synthesized from Jeju scoria. The adsorption performances of lead ion decreased in the order of Na-P1 > SOD > ANA > JBW > CAN. These results showed that the synthetic zeolite with a higher cationic exchange capacity showed a higher adsorption performance. The uptake of lead ion by synthetic zeolites were described by Freundlich model better than Langmuir model. The adsorption kinetics of lead ion by synthetic zeolites fitted the pseudo 2nd order kinetics better than pseudo 1st order kinetics. The effective diffusion coefficients of lead ion by synthetic zeolites were ten times higher than the zeolite A synthesized from coal fly ash.

• Journal of Radiation Protection and Research
• /
• v.15 no.2
• /
• pp.7-16
• /
• 1990

The sorption of radioactive cobalt and ruthenium on alumina, silica gel, zeolite 3A, kaolin and Na-bentonite has been studied as a function of pH. nuclide concentration and ionic strength. Retardation factor for cobalt and ruthenium on soil minerals was determined through porosity measurement. Hydrolysed species, cobalt and ruthenium interact with solid surfaces by physical adsorption processes. Freundlich sorption isotherms for cobalt and ruthenium are effectively linear. The sorption decreases with increasing ionic strength for cobalt and ruthenium. The effect of increasing porosity on the retardation factor countered the effect of a significant increase in the distribution coefficient.

• Carbon letters
• /
• v.23
• /
• pp.30-37
• /
• 2017

Dyes are widely used in various industries including textile, cosmetic, paper, plastics, rubber, and coating, and their discharge into waterways causes serious environmental and health problems. Four different carbon nanostructures, graphene oxide, oxidized multi-walled carbon nanotubes, activated carbon and multi-walled carbon nanotubes, were used as adsorbents for the removal of Nile Blue A (NBA) dye from aqueous solution. The four carbon nanostructures were characterized by scanning electron microscope and X-ray diffractometer. The effects of various parameters were investigated. Kinetic adsorption data were analyzed using the first-order model and the pseudo-second-order model. The regression results showed that the adsorption kinetics were more accurately represented by the pseudo-second-order model. The equilibrium data for the aqueous solutions were fitted to Langmuir and Freundlich isotherms, and the equilibrium adsorption of NBA was best described by the Langmuir isotherm model. This is the first research on the removal of dye using four carbon nanostructures adsorbents.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.09a
• /
• pp.1507-1510
• /
• 2009

In this study, Batch Test was carried out on the adsorption abilities to heavy metal of FWC, which occurred during the carbonization process was part of recycling methods of food waste. The heavy metals used in the experiment were lead and cadmium; mixing its solution with carbonized ratio of 50:1, respectively. The different concentrations were applied with 50, 100, 200, 400, and $800\;{\mu}g/m{\ell}$. When, the initial concentration is less than 200mg/l, there has been a high removal ratio of 20% to 50%. Comparing the test results on Lanmmuir and Freundlich adsorption isotherms, the Freundilich adsorption isotherm was well compatible.

• Journal of the Korean Chemical Society
• /
• v.55 no.6
• /
• pp.1024-1029
• /
• 2011

PVA/silica hybrid xerogels were synthesized by sonohydrolysis of a mixture of 2-way catalyzed TEOS and water solution of PVA. PVA was successfully removed from the xerogels through calcination and its removal was confirmed through TGA analysis of the calcined gel. Microstructure of the gels was studied through SEM, XRD and FTIR. Nitrogen sorption studies were conducted to find out surface area of different samples. It was found out that the samples having PVA removed through calcinations have higher surface area (411.64 $m^2$/g) than the samples (353.544 $m^2$/g) synthesized without any PVA. Adsorption properties of these xerogels synthesized by using different ratios of components were studied by taking Rhodamine G6 as a model adsorbate. The experiments were conducted at room temperature ($25^{\circ}C$). UV visible spectroscopy was used to measure the concentration of the dye before and after adsorption. The adsorption data of Rhodamine G6 on PVA modified silica is described by the Freundlich's adsorption model.

• Journal of the Korean Chemical Society
• /
• v.14 no.4
• /
• pp.347-355
• /
• 1970

The state of carrier-free yttrium-90 has been studied by filtration method with membrane filters. The studies include the adsorption ratio of carrier-free yttrium-90 on membrane filters by the change of PH, concentration of yttrium-90, and the pore size of member filters. The adsorption followed to Freundlich adsorption isotherm. The adsorption mechanism was proposed by the adsorption of transient state as an ionic form of $Y^{3+}$, and the experimental results were explained satisfactorily by the proposal. The adsorbed state of yttrium was present in the forms of yttrium such as $Y^{3+},\;Y(OH)^{3+},\;Y(OH)^{2+},\;Y(OH)^+_3,\;and\;Y(OH)_3$,and the existing ratios of the forms of yttrium were sharply changed by PH. It seems to be valid tha the carrier-free yttrium-90 exists mostly in $Y^{3+}$ state.

• Journal of Environmental Health Sciences
• /
• v.23 no.4
• /
• pp.21-25
• /
• 1997

A study on the removal of mercury by Saccharomyces cerevisiae and Aureobasidium pullulans was done, in which the model of adsorption isotherm and adsorption rate was proposed. The adsorption isotherm of mercury by S. cerevisiae was accorded with Langmuir model but A. pullulans was followed to Freundlich model. The amount of mercury removed by A. pullulans was higher than that of S. cerevisiae, but the adsorption rate of mercury by A. pullulans was slower than that of S. cerevisiae. In a rapid adsorption process, therefore, it is more useful to use S. cerevisiae as a biosobent.