• Clean Technology
• /
• v.18 no.3
• /
• pp.287-294
• /
• 2012

In this study, performances of two cleaning methods were analyzed and a cleaning system was designed to develop a cleaning process of electronic components to remanufacture old laser copy machine. First, plasma cleaning as a dry cleaning method was executed to test cleaning ability. In cleaning of printed circuit board (PCB) by plasma, some damages were found near the metal parts, and considering the productivity, this method was not adequate for the cleaning of electronic components. With 4 different cleaning agents, ultrasonic cleaning tests were executed to select an optimal cleaning agent, aqueous agents showed superior cleaning performance compared to semi-aqueous and non-aqueous agents. Cleaning with aqueous cleaning agent A and 28 kHz ultrasonic frequency can be completed in 30 sec to 1 min. Finally, an ultrasonic cleaning system was constructed based on the pre-test results. Optimal cleaning conditions of 40 kHz and $50^{\circ}C$ were found in the field test. The productivity and economic efficiency in remanufacturing of laser copy machine are expected to increase by adapting developed ultrasonic cleaning system.

• Korean journal of food and cookery science
• /
• v.32 no.4
• /
• pp.476-491
• /
• 2016

Purpose: This study investigated consumers' perception of food safety and risk from foodborne illness and consumption pattern of meat and processed meat products in Korea. Methods: A quantitative survey was performed by trained interviewers, surveying 1,500 adults who were randomly selected from six major provinces in Korea. Results: Most of the respondents reported foodborne illness risk related to the consumption of raw meat but not related to heated meat and processed meat products. As respondents perceived the risk of food poisoning from raw meat, the purchase and intake decreased (p<0.001). Most of the respondents considered a low possibility of foodborne illness at home. Seventy-seven percent of the respondents thought that bacteria and virus are the main causes of foodborne illness. Improper storage practice (40.7%) and unsafe food material (29.3%) were the main risk factors contributing to foodborne illness. Perception and practice of food safety was significantly different by the residency area. The most preferred meat, processed meat, and processed ground meat products were pork (58%), ham (31.1%), and pork cutlet (40.4%), respectively. The most preferred cooking method was roasting, regardless of the type of meat, but the second preference for cooking method was significantly affected by the type of meat (p<0.001): stir-fried pork, beef with seasoning, fried-chicken and boiled duck. Frequency of eating out was 0.75/day on weekdays and 0.78/day on weekends at the mainly Korean BBQ restaurant. Conclusion: The results of this study could be used to develop science-based education materials for consumer and the specific guideline of risk management of meat and processed meat products.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.14 no.4
• /
• pp.155-160
• /
• 2012

This study was conducted to develop a practical method for estimating the extremes of minimum air temperature with given return-period based on the frequency distribution of daily minimum air temperature in January. Daily temperature data were collected from 61 meteorological observatories country-wide from 1961 to 2010. Most of daily minimum temperature in January could be represented by a normal-distribution, so it is possible to predict stochastically the lowest temperature by the mean and standard deviation. We developed a quadratic function to estimate standard deviation in terms of daily minimum temperature in January. Also, we introduced a coefficient which can be used to predict an extreme of minimum temperature with mean and standard deviation, and is dependent on return-periods. Using this method, we were able to reproduce the past 30-year extremes with an error of 1.1 on average and 5.3 in the worst case.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.39 no.5
• /
• pp.544-555
• /
• 2002

The aim of this study is to develop the $^1H$-MRS data postprocessing software for both single-voxel and multi-voxel technique, which plays and important role as a diagnostic tool in clinical field. This software is based on graphical user interface(GUI) under windows operating system of personal computer(PC). In case of single-voxel MRS, both of raw data in time-domain and spectrum data in frequency-domain are simultaneously displayed in a screen. Several functions such as DC correction, zero filling, line broadening, Lorentz-Gauss filtering and phase correction, etc. are included to increase the quality of spectrum data. In case of multi-voxel analysis, spectroscopic image reconstructed by 3-D FFT was displayed as a spectral grid and overlapped over previously obtained T1- or T2-weighted image for the spectra to be spatially registered with the image. The analysis of MRS peaks were performed by obtaining the ratio of peak area. In single-voxel method, statistically processed peak-area ratios of MRS data obtained from normal human brain are presented. Using multi-voxel method, MR spectroscopic image and metabolite image acquired from brain tumor are demonstrated.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.5
• /
• pp.685-692
• /
• 2018

Busan city implemented 'taxi transfer discount system' since October 2017 in order to create for new demand taxis. However, due to the low transfer discount amount and limited payment method to prepaid cards, it is difficult to attain the aim. In this study, we investigated the usage status of taxi transfer discount system and the intention to use taxi transfer discount system according to the discount amount level. We established a model of intention to estimate demand of taxi transfer discount using ordinal logistic model. The results of analysis are as following. The critical reason for low usage was to limit taxi transfer discount payment methods to prepaid cards other than post-paid cards which is used for most transportation payment. It was found that the discount rate for taxi transfers was affected in order of payment method, the purpose of the travel, major transportation, frequency taxi use, age, transportation costs, and the discount of taxi transfers. Also, the taxi transfer discount could be expected to increase to 1,550 won based on the price elasticity of demand due to changes in taxi transfer discount rate.

• Journal of Korean Society of Forest Science
• /
• v.95 no.6
• /
• pp.729-734
• /
• 2006

This paper aimed to suggest decision-making method for forest management planning using integer programming. Thus, the study examined 85 stands consisting of Korean pine, Japanese larch and oak stands-all of which were at the most suitable time for tending, selection thinning, commercial thinning and final cutting-in the experimental forest of Kangwon National University. The forest management model comprised one objective function, maximizing harvest volume in each stand according to tree species and the kinds of practices, and seven constraints: frequency and stands of practices, minimum and maximum yields, even yields, maximum production, and decision-making varialbes. Besides, the entire period intended by the study was 10 years, divided into 5 management periods. In conclusion, the forest management planning model using integer programming proved that among 85 stands, forest practices were conducted over 68 stands (202.8 ha), producing the total harveted volume of $20,000m^3$, while the rest was reserved. This case study could help make decisions on whether and when the forest practices and harvests could be done in a specific condition.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.7 no.1
• /
• pp.26-35
• /
• 2014

This research aims to identify relationships between stress level of parents in single parent families and life satisfaction in accordance with methods of getting rid of stress. Subject of the research were 260 parents in single parent families, centering on small towns in midsection sphere based on answers to questionnaire executed from March 1, 2013 to July 31, 2013. Collected data were analyzed by executing frequency analysis, factor analysis, t-test, one-way ANOVA, correlation analysis, regression analysis, etc. and an empirical verification was performed at 5% of significance level. From the result of the research, stress level appeared according to factors in a sequence of economic power, physical strength, social relation, family, mentality, etc. and significant influence to life satisfaction was found depending on factors such as stress removing methods and controlling effect. And minor factors were shown in a sequence of finance, emotion and acknowledgement. Suggestive points of the research are thought to be significance of stress removing method to the enhancement of life satisfaction, which will be a good material for the establishment of fundamental supporting plans and development of programs for single parent families.

• Korean Chemical Engineering Research
• /
• v.45 no.6
• /
• pp.604-610
• /
• 2007

Characteristics of steam gasification and combustion of naphtha tar pitch, which is the bottom product of naphtha cracking process, were investigated by using the thermo gravimetric analyzer to develop the technology for obtaining syngas by using the naphtha tar pitch as a carbon source. Friedman's and Ozawa-Flynn-Wall method were used to calculate activation energy, reaction order and frequency factor of reaction rate constant for both of steam gasification and combustion. The activation energy of combustion of naphtha tar pitch based on the fractional conversion by Friedman's method was in the range of 41.58 ~ 68.14 kJ/g-mol when the fractional conversion level was in the range of 0.2~0.6, but 183.07~191.17 kJ/g-mol when the conversion level was 0.9~1.0, respectively. In case of steam gasification of naphtha tar pitch, the activation energy was in the range of 31.87~44.87 kJ/g-mol in the relatively lower conversion level (0.2~0.6), but 70.63~87.79 kJ/g-mol in the relatively higher conversion level (0.8~0.95), respectively. Those results exhibited that the steam gasification as well as combustion would occur by means of two steps such as devolitilization followed by combustion or gasification.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.92-116
• /
• 1999

Tomographic approaches to image underground structure using electrical properties, can be divided into DC resistivity, electromagnetic, and radar tomography, based on the operating frequency. DC resistivity and radar tomography methods have been recently applied to site investigation for engineering purpose in Korea. This paper review these two tomography methods, through the case histories acquired in Korea. As another method of borehole radar survey, borehole radar reflection method is included, and its inherent problem and solution are discussed, how to find the azimuth angle of reflector using direction-finding-antenna. Since the velocity anisotropy of radar wave has been commonly encountered in field data, anisotropic radar tomography is discussed in this paper. In DC resistivity tomography, two subjects are focussed, electrode arrays, and borehole effect owing to the conductive fluid in borehole. Using the numerical modeling data, various kinds of electrode ways are compared, and borehole effect is illustrated. Most of the case histories presented in this paper are compared with known geology, core logging data, and/or Televiewer images.

• Geophysics and Geophysical Exploration
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2012

To evaluate methods of determining near-surface shear-wave velocities (${\nu}_s$), we derived dispersion curves of Rayleigh waves generated by both passive and active sources in Chuncheon, Korea. Microtremors were recorded for 5 minutes in each of four triangular arrays with radii of 5 ~ 40 m. Those data were analyzed using the Spatial Autocorrelation method. Rayleigh waves were also generated by a hammer source and recorded in the same area for 2 s using 24 4.5-Hz geophones. Multichannel Analysis of Surface Waves was applied to those data. Velocity spectra were derived with relatively high signal-to-noise ratios in the frequency ranges of 7 ~ 19 and 11 ~ 50 Hz for the microtremors and synthetically generated Rayleigh waves, respectively. The resultant dispersion curves were combined as one and then input to inversion to derive shear wave velocities that were compared with a lithology log from a nearby well. Shearwave velocities in the top soil and soft-rock layers are almost constant with values of 221 and 846 m/s, respectively; while the inverse-modeled ${\nu}_s$ increases linearly in the gravelly sand, cobbles, and weathered-rock layers. If rock type is classified based on shear-wave velocity, the inversion-derived boundary between weathered-rock and soft rock may be about 5 m deeper than in the well log.