• Journal of the Korean Institute of Telematics and Electronics
• /
• v.4 no.1
• /
• pp.13-21
• /
• 1967

A low pass filter is synthesized with R, C and negative impedance converters(NIC). The filter has a 4-th order elliptic function, which gives best magnitude approximation with equi-ripple characteristics both in pass and stop band. And experimental investigations have been made on the effect of the anticipated deviation of the NIC conversion factor and of possible loaded operation. Through the study, it has been cocluded that: 1. For minimum pole-zero sensitivity with respect to the NIC conversion factor, the network of a parallel RC-NIC configuration is preferable and the Horowitz polynomial decomposition method is applied in the synthesis procedure. 2. A few percentage variation of the NIC conversion factor changes the frequency and amplitude characteristics of the filter by nearly negligible amount. 3. With a load resistance below the critical value, the filter turns into an oscillator.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.391-394
• /
• 1997

A H$_{\infty}$ control techniques with roll eccentricity filter is proposed to alleviate the effect of entry thickness variation and roll eccentricity occurred in rolling stand itself of tandem cold mills. A robust controller to the disturbances is designed using H$_{\infty}$ control techniques, which can reflect the input direction of disturbances and knowledge of disturbance spectrum in the frequency domain. And, non-standard H$_{\infty}$ control problem caused by selection of weight function having poles on j.omega. axis is discussed. The evaluation for the resultant controller composed by H$_{\infty}$ synthesis is done through computer simulations. The effectiveness of the proposed method is compared to those of the conventional LQ synthesis method and a feedforward controller against roll eccentricity, which was already studied.ied.

• Journal of Advanced Marine Engineering and Technology
• /
• v.19 no.3
• /
• pp.42-49
• /
• 1995

In this study, the optimum structural modification of the L-type structure by shape changes is suggested. The vibration characteristics of L-type structure are analyzed by the sub-structure synthesis method, and the coordinte sensitivities of each sub-structure are calculated and the change quantities of the positions to be modified are suggested by using the coordinate sensitivities. The results obtained are as follows : 1. The sensitivities of the natural frequency could be calculated by the sensitivity analysis. 2. The change quantities of the position to be modified could be suggested by the optimum structural modification method. 3. The developed program could reduce the process and time of computation, since the sensitivity was directly calculated by differential method, not finite difference method.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.3
• /
• pp.62-74
• /
• 1994

This paper addresses on the model synthesis and performance analysis of an engine mount featuring electro-rheological(ER) fluids which undergo a phase change when subjected to electric fields. A novel type of ER fluid-filled engine mount is devised and its hydraulic model is constructed. An equivalent mechanical model is subsequently obtained from the governing equation of the hydraulic model. The model parameters associated with the ER fluids are distilled from experimental investigations on the Bingham properties of the fluids. The distilled data are then incorporated into the governing model to undertake feasible work through computer simulations,. It is shown that the proposed engine mount has an inherent capability of controlling both the damping force and the resonance frequency. Other superior performance characteristics accrued from the proposed methodology are also evaluated.

• The Journal of the Korea Contents Association
• /
• v.4 no.4
• /
• pp.205-213
• /
• 2004

In this paper, we proposed a wavelet phase-only filter modulation synthetic discriminant function joint transform correlator(WPOfSDF-JTC) for scale invariant pattern recognition, and an improved algorithm to reduce the filter synthesis time. Computer simulation showed that the proposed filter has better SNR than CWMF if input image has random noise and the improved synthesis algorithm can reduce the iteration time. We used frequency selective JTC to solve the problem of the optical alignment and eliminate the autocorrelation and crosscorrelation between each input image.

• Journal of the Korean Ceramic Society
• /
• v.29 no.9
• /
• pp.681-688
• /
• 1992

Ultrafine Si3N4 and Si3N4+SiC mixed powders were synthesized through thermal plasma chemical vapor deposition(CVD) using a hybrid plasma, which was characterized by the supersposition of a radio-frequency plasma and arc jet. The reactant SiCl4 was injected into an arc jet and completely decomposed in a hybrid plasma, and the second reactant CH4 and/or NH3 mixed with H2 were injected into the tail flame through double stage ring slits. In the case of ultrafine Si3N4 powder synthesis, reaction efficiency increased significantly by double stage injection compared to single stage one, although crystallizing behaviors depended upon injection speed of reactive quenching gas (NH3+N2) and injection method. For the preparation of Si2N4+SiC mixed powders, N/C composition ratio could be controlled by regulating the injection speed of NH3 and/or CH4 reactant and H2 quenching gas mixtures as well as by adjusting the reaction space.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2001.11a
• /
• pp.173-178
• /
• 2001

부분구조 합성법(substructuring or substructure synthesis)은 부분구조(substructure)의 주파수 응답함수(FRFs, frequency response functions)를 이용하여 합성된 전체 구조물의 동특성(dynamic behavior)을 파악하는 기술로서 이에 관한 이론은 명확하며 간단하다. 즉, 역행렬 계산과 같은 기본적인 행렬연산으로 부분구조 합성을 수행한다. 그러나, 여러 가지 요인으로 인하여 계산된 합성 결과는 실제로 결합된 전체 구조물의 동특성과는 차이를 보인다. 현실적인 이유로 고려하지 못하는 회전자유도와 실험에서 수반되는 여러 가지 측정오차는 주요한 요인이며 이에 대한 연구 또한 많이 진행되었다. 본 연구에서는 이러한 요인 중, 상대적으로 덜 중요하게 평가된 모드자름 오차(modal truncation error)의 영향을 고려한다. 단순한 구조물에 대하여 모의실험을 수행함으로써, 모드자름 오차로 인하여 완전히 잘못된 합성 결과가 나을 수 있다는 것을 보인다. 측정된 FRE를 이용하여 이러한 오차를 보정(compensation)하는 소개하고 이를 대상 구조물에 적용하여 모드자름 오차의 영향을 상당히 줄일 수 있다는 것을 보인다. 복잡한(complicated) 구조물에 대하여 모드자름 오차의 영향을 줄이기 위해서 모든 FRFs를 보정하는 것은 어려우므로 현실적인 대안을 모색한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.12
• /
• pp.54-62
• /
• 2003

A systematic synthesis process is described lot the simulation of current-controllable inductors using operational transconductance amplifiers (OTAs). The process is used to obtain three circuits; two are believed It) be novel. The process is also applied to design current-controllable frequency-dependent negative resistances (FDNRs). Operation principles of designed circuits are presented and experimental results are used to verify theoretical predictions. The results show close agreement between predicted behavior and experimental performance. The application of a FDNR to a current-controllable band-pass filter is also presented.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.132.1-132.1
• /
• 2014

Fluorescent-magnetic nanoclusters were synthesized for biomedical applications. The nanoclusters consisted of superparamagnetic core-nanoclusters, highly fluorescent shell of nanocrystals, and lipid A. Magnetic cores were used for both magnetic resonance imaging (MRI) and cell separation. Fluorescent shell was used for optical imaging. The lipid-A-loaded nanoclusters were up-taken by dendritic cells via phagocytosis, which successfully activated dendritic cells. The dendritic cells were migrated to lymph nodes and spleen of mice. The results showed that our novel nanoclusters can play a role as an efficient optical and magnetic imaging, a cell separating and a pathogen mimetic agent at the same time. Additionally, synthesis of wavelength conversion nanowires will be discussed, which may be used as an optical nanoprobe in biological studies.

• Journal of Powder Materials
• /
• v.24 no.5
• /
• pp.351-356
• /
• 2017

Tin dioxide nanoparticles are prepared using a newly developed synthesis method of plasma-assisted electrolysis. A high voltage is applied to the tin metal plate to apply a high pressure and temperature to the synthesized oxide layer on the metal surface, producing nanoparticles in a low concentration of sulfuric acid. The particle size, morphology, and size distribution is controlled by the concentration of electrolytes and frequency of the power supply. The as-prepared powder of tin dioxide nanoparticles is used to fabricate a gas sensor to investigate the potential application. The particle-based gas sensor exhibits a short response and recovery time. There is sensitivity to the reduction gas for the gas flowing at rates of 50, 250, and 500 ppm of $H_2S$ gas.