• 대한간호학회지
• /
• 제25권4호
• /
• pp.709-728
• /
• 1995

The job related activities of sixty nine nurses, working in the emergency rooms of three university hospitals, were analyzed for six days according to preestablished checklist of nursing activities ; the frequency of these activities and the amount of time spent in each specific nursing activity. The established checklist was monitored every five minutes for the duration of the duty autu, thus producing 414 items of data. The data were not gathered on consecutive days but over the period of one month from May 6, 1994 to June 5, 1994. The following conclusions are derived from analysis of the data : 1. Twelve categories of nursing activities were obtained : The primary activity was communication related to the patient and all information pertaining to the patient. Other activities included maintaining the patient's record, observation and assessment of the patient, cooperation with other medical personnel, management of equipment and drugs, procedure and treatment, specimen collection, consultation and education for the patient, including drug management and personal hygiene and any other relevant education to the patient's condition. 2. The average frequency of categorized nursing activity can be classified as follows : communication related to patient was the highest at 17.6 times. The next was maintaining the patient's record at 17.3 times. The observation and assessment occurred 16.9 times. Consultation and education for patients and family, 8 times, medication, 5.7 times, and procedures and treatments, 6 times. 3. The average time required for each activity was as follows : 230.1 minutes (or maintaining the patient's record, 204.9 minutes for communication related to the patient, 199.2 minutes for observation and assessment, 71.2 minutes for medication, 66 minutes for consultation and education of the patient and family, and 51.8 minutes for procedures and treatment. 4. The most demanding nursing activity in the emergency room for the nurse was answering questions from the patient's family, maintaining communication between the medical staff, maintaining and reviewing the patient's charts, writing prescriptions and monitoring 1. V. infusion rates. 5. The most time consuming nursing activities for the emergency room nurse include maintaining and following the patient's charts, communication between the medical staff, answering questions from the patient's family, observation of the patient and relaying all of the appropriate patient information to the incoming nurses during a shift change. 6. The F-test was administered to measure the required time for the categorized nursing activities according to day, evening, and night-shift nurses. There were significant differences (p<.05) in specimen collection, observation and assessment, cooperation between medical staffs, personal hygiene, communication related to patient, education and re-search. Posterior multiple comparison test showed that specimen collection, cooperation between medical staffs and personal hygiene were mostly done by the evening-shift nurses. Also most observations and assessments were done by the night-shift nurses. Education and communication to patients were done by day-shift nurses. Thus there were significant difference between shifts for the main nursing activities. So there should considev a reallocation of the duty of nurses on each shift. 7. The F-test also indicated that there wes a similarity in time duration for procedures and treatments and for cooperation between medical staff and nurses in all three hospitals. However, the remaining categories of nursing activities also showed a significant difference between the three hospitals. This indicated that there were differences in each emergency room that influence time for each categorized nursing activities and this should be given more consideration. Recommendations : 1. A seasonal difference should be considered in the activities of nurses in the emergency room and a comparative analysis should be carried out to deter-mine seasonal differentiation. 2. A study on more objectively measurable nursing activities should be administered as well as one determining the subjective responds towards nursing activities in the emergency room.

• 동서간호학연구지
• /
• 제10권1호
• /
• pp.11-26
• /
• 2004

The purpose of this study is to investigate the present conditions of nursing investment contents, its conversion process, and output in Oriental University Medical Center, Korea to get good qualified Oriental nursing result which is the ultimate purpose of the Oriental nursing management, and to develope a matrix of Oriental nursing management system on the basis of that project. The subjects for nursing investment and output contents were eighteen nursing directors in eleven Oriental University Medical Center and two hundred thirty-nine nurses with three years and over experience in Oriental medical center. The subjects for Oriental nursing organization, human affair management, and control function were nineteen Oriental medical center in Oriental University Medical Center, Korea. Data were collected from November, 2002 to February, 2003 with questionnaire. Data analysis was done by SPSS PC+ 12 program. Frequency, percentage, and minimum/maximum values were used for investment contents, and frequency and percentage were used for conversion process and output contents. 1. The input factors of oriental nursing management system The objective's western hospital career was over five years of one hundred and seventy-five(73.2%) persons. Nursing in-service education was performed in fourteen hospitals(77.8%). Two hundreds(83.7%) were pro to oriental nurse system. Only four hospitals(22.2%) had independent budget in nursing division. Nursing staff allocation to the bed was from 2.8:1 to 9.06:1 respectively, with a big gap of the rate following the hospitals. 2. The conversion factors of oriental nursing system 1) Oriental nursing system Oriental hospital nursing system was organized independently in ten hospitals among eighteen hospitals. The recruitment of nurses which was a vital role of the nursing division of the hospital was mostly(79%) opened. The education to develope nursing personnels was through in-service one in 97.4%. Education for oriental nursing and management was performed in 42.1%(eight hospitals) and that for reserves was done in 36.8%(seven hospitals). Administration for nursing education by nursing division was 68.5%(thirteen hospitals). The post education evaluation was performed by report submission in 36.8%(seven hospitals), by written examination in 26.3%, by questionnaires in 21.1%, and by lecture presentation in 15.8% subsequently. The directorial meeting for the nursing directors was attended by 84.2%(sixteen hospitals), and the meeting type was the medical executive and support division executive meeting in 55.6%(ten hospitals) and the personnel management in 39.6%(seven hospitals). 2) The actual conditions of oriental nursing personnel management The reason of working in oriental hospital was by voluntary in 67.1%(a hundred and sixty persons), by nursing department order in 28.0%(sixty-seven persons), and by others in 5.0%(twelve persons) respectively. The shift form was a three-shifts one in 94.7%(eighteen hospitals), a two-shift one in only one hospital. Duty assignment was functional in 52.6%(ten hospitals), team and functional in 26.3%(five hospitals) and no team alone. Promotion manual was present at 68.4%(thirteen hospitals) and the competency essentials comprised of performance evaluation in 79%, interview, written examination, training result, study result subsequently. No labor union existed in 79%(fifteen hospitals) 3) Oriental nursing preceptor system There were five oriental hospitals(27.7%) administering the preceptor utilization model, which showed lower rate than the twenty-two medical university hospitals in Seoul in which fifteen hospitals (72.7%) were having the system. To the question of necessity of oriental nurse system asked to the objectives of two hundred and thirty-nine with more than three year-experience in oriental hospital, two hundred persons(83.7%) answered positively. 4) The control of oriental nursing The evaluation results from the target hospitals were mostly not opened in 89.4% of oriental hospitals. Thirteen hospitals(68.3%) had evaluation system of direct managers and the next were three hospitals(15.8%) of direct managers and selves. There was one hospital(5.3% each) where fellows and superiors, fellows, and inferiors' evaluation was performed and no hospital where superiors, fellows, inferiors and selves, and superiors, fellows and selves' evaluation was performed. The QI activity of nursing was 42.1%(eight hospitals) for nursing service evaluation, 36.8% for survey of ECSI, 26.3% for survey of ICSI, 15.8% for medical visit rate, 10% for hospital standardization inspection in sequence. 3. The output factors of oriental nursing management system The job satisfaction appeared good in general, indicating very good in thirty-seven persons (15.7%), good in one hundred and fourteen persons (48.3%) and fair in eighty-five persons(36.0%).

• Journal of Oral Medicine and Pain
• /
• 제30권3호
• /
• pp.337-344
• /
• 2005

악골과 구강은 피부, 근육, 입술, 뺨, 치은, 혀, 점막 등의 다양한 연조직으로 구성되어 있으며, 악구강계의 정상적인 기능을 평가하기 위해서는 각 연조직의 특성을 이해하는 것이 중요하다. 또한 각 조직의 질병 이환 여부와 치료 전후의 상태를 평가, 비교하는 것도 중요하므로 이를 평가하기 위한 다양한 연구들이 진행되어 왔다. 특히, 최근에는 촉각센서(tactile sensor)라는 새로운 기기가 개발되면서 연조직의 탄성 및 경도와 관련된 특성을 밝히려는 시도가 이루어지고 있다. 이 연구의 목적은 구강안면동통과 관련성이 높은 측두근, 교근 및 승모근의 근육상태를 촉각센서를 이용하여 평가함에 있어 먼저 술자간, 술자내 신뢰도를 조사하고자 하였다. 건강한 성인 남자 5명의 좌우측 전측두근, 교근 및 상부승모근의 경도와 탄성을 촉각센서(Venustron II, Axiom Co., Japan)를 이용하여 측정하였다. 각 근육당 표본수는 10개였다. 피검자를 의자에 바로 앉힌 다음, 피검자의 안면피부에 촉각센서의 probe를 각 근육에 수직되게 위치시켜 근육의 경도와 탄성을 측정하였다. 교근과 전측두근은 수축시 최대풍융부를 촉진하여 펜으로 표시하고 치아가 가볍게 닿게 한 안정 상태에서 센서의 probe를 근육의 최대풍융부에 수직으로 motor-drive를 이용하여 눌러서 측정하였다. 승모근은 상부를 촉진하여 표시한 다음, 동일한 방법으로 측정하였다. 피검자에 대하여 같은 날 2명의 술자가 각각 근육의 경도와 탄성의 변화를 측정하여 술자간 신뢰도 조사하였고, 2일 뒤 다시 한번 측정하여 술자내 신뢰도를 조사하였으며 통계분석에는 Correlation coefficient 및 Paired t-test를 이용하였다. 실험결과, 전측두근, 교근 및 상부승모근의 경도와 탄성에 대한 두 검사자의 평균값은 유의한 차이를 보이지 않았으며 서로 높은 상관관계를 보여주었다. 또한 한 검사자가 2일의 간격을 두고 시행한 두 번의 검사에서도 두 검사간 평균값은 유의한 차이를 보이지 않았으며 서로 높은 상관관계를 보여주었다. 즉, 촉각센서를 사용한 교근과 전측두근 및 상부승모근의 경도와 탄성의 평가는 높은 술자간, 술자내 신뢰도를 보여주었으며, 두경부 근육을 정량적으로 평가할 수 있는 재현성 높고 효과적인 검사법이라고 할 수 있다.

• 대한화학회지
• /
• 제53권3호
• /
• pp.233-243
• /
• 2009

실리카지지 니켈(Ni-Si$O_2$), 실리카지지 구리(Cu-Si$O_2$), 몇가지 조성의 실리카지지 니켈과 구리의 합금(Ni/Cu-Si$O_2$)을 실온에서 일산화탄소(CO)의 압력을 넓은 범위에서 변화시키면서(0.2 $torr{\sim}$50 torr) 흡착된 CO의 적외선 스펙트럼을 1500 $cm^{-1}{\sim}2500\;cm^{-1}$ 범위에서 관찰했고 실온에서 진공탈착시키면서 흡착된 CO의 적외선 스펙트럼을 관찰했다. Ni-Si$O_2$에 CO를 흡착시켰을 때 2059.6 $cm^{-1},\;{\sim}$2036.5 $cm^{-1},\;{\sim}$1868.7 $cm^{-1},\;{\sim}$1697.1 $cm^{-1}$의 네 흡수띠가 관찰되었고, Cu-Si$O_2$에 일산화탄소를 흡착시켰을 때 $\sim$2115.5 $cm^{-1},\;{\sim}$1743.0 $cm^{-1}$ 두 흡수띠가 관찰되었으며, Ni/Cu-Si$O_2$에서는 ${\sim}2123.2\;cm^{-1}$, 2059.6 $cm^{-1},\;{\sim}$2036.4 $cm^{-1},\;{\sim}$1899.5 $cm^{-1},\;{\sim}$1697.1 $cm^{-1}$에 다섯 흡수띠가 관찰되었다. Ni/Cu-Si$O_2$, Cu-Si$O_2$, Ni/Cu-Si$O_2$에서 CO를 흡착시켰을 때 관찰된 흡수스펙트럼은 이전의 보고와 근사적으로 일치한다. 1800 $cm^{-1}$ 이하의 흡수띠는 Ni이나 Ni/Cu 합금의 스텦이 있는 결정표면에서 관찰된 바 있는데 Ni-Si$O_2$, Ni/Cu-Si$O_2$를 실온에서 CO를 흡착시켰을 때 나타나는 ${\sim}1697.1\;cm^{-1}$ 흡수띠는 Ni이나 Ni/Cu 합금 표면에서 스텦에 인접한 흡착자리에 흡착한 CO에 기인한 흡수띠로 제시할 수 있다. Cu-Si$O_2$ 시료를 실온에서 CO를 흡착시켰을 때 Cu 결정표면에서 2000 $cm^{-1}$ 이하의 흡수띠가 관찰되는 경우는 드문데 1743.0 $cm^{-1}$ 흡수띠는 Cu 표면의 스텦에 인접한 흡착자리에 흡착한 CO에 기인한 흡수띠로 제시할 수 있다. Ni/Cu-Si$O_2$에서 Cu의 함량이 몰분율 0.5까지 변함에 따라 같은 CO 압력 또는 같은 진공탈착시간에서 흡수띠의 위치가 21 $cm^{-1}$ 이하로 다른 ⅠB 금속을 첨가했을 때보다 작게 변하는데 Cu d 전자의 리간드 효과가 작은 현상에 기인한 것으로 볼 수 있다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2011년도 제36회 춘계학술대회논문집
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.

• 한국광물학회지
• /
• 제31권4호
• /
• pp.295-306
• /
• 2018

고상 핵자기공명 분광분석은 비정질의 원자 구조를 제공하는 효과적인 방법론으로 다양한 비정질 규산염의 원자구조를 규명해왔다. 하지만, 함철 비정질 규산염의 경우, 철 함량 증가에 따른 신호의 변화가 상자성 효과와 구조 변동을 모두 반영하고 있기 때문에 분석에 많은 어려움이 있다. 이에 철 함량 증가에 따른 신호 변화가 실제 구조의 변동으로부터 기인한 것인지 확인하기 위해서는 온도변화에 따른 신호의 이동 여부를 관찰하는 것이 필수적이다. 본 연구에서는 철 함량에 따른 함철 비정질 규산염의 신호 변화를 해석하기 위하여 철이 포함된 휘석과 아노르다이트 조성의 비정질의 가변회전 속도 $^{29}Si$와 $^{27}Al$ NMR 실험을 수행하였다. 이는 온도 상승에 따른 신호의 변화 여부를 확인할 수 있게 하며, 쌍극자 효과에 관한 정보를 제공한다. 함철 휘석 비정질의 $^{29}Si$ NMR과 함철 아노르다이트 비정질의 $^{27}Al$ NMR 결과, 회전 속도 증가에도 불구하고 신호의 형태 및 위치가 달라지지 않았다. 회전 속도의 증가가 신호에 변화를 야기하지 않음을 확인한 본 결과는 철 함량 증가로 인한 신호의 변화가 상자성 이동 기원이 아니라, 철로부터 컷오프 반경 너머의 생존 신호임을 지시한다. 이에 철 함량 증가에 따라 아노르다이트 비정질의 Al 신호가 음의 화학적 차폐 방향으로 이동하는 현상은, 철의 진입에 따른 ${Q^4}_{Al}$(1 또는 2Si) 비율의 상대적 증가와 철과 ${Q^4}_{Al}$(3 또는 4Si) 구조간의 높은 공간적 근접도를 지시한다. 본 결과는 철 함량에 따른 규산염 비정질의 고상 NMR 신호 변화가 실제 구조적 변화를 지시하고 있음을 보여주며, 고상 NMR이 자연계에 존재하는 각종 유리질의 구조 분석에 효과적으로 적용될 수 있음을 제시한다.

• 한국산업정보학회논문지
• /
• 제24권1호
• /
• pp.45-63
• /
• 2019

본 국내 건설업 사업자수는 매년 증가하고 있으며 산업의 고도화, 건설공사의 고층화 대형화로 건설업 근로자의 재해 노출 위험이 커지고 있다. 특히 문화와 언어가 다른 외국인 근로자 수의 증가, 다수의 중장년층 근로자, 옥외생산, 고소작업, 중장비 작업 등의 건설업 특성으로 타 산업에 비해 재해자가 많고 중대재해 위험 또한 높은 실정이다. 건설업의 경우 정해진 기간 안에 이루어져야하는 노동집약적 산업이고, 야간작업 등의 특수한 작업환경이 많으며 적정 공사비 확보가 안될 경우 안전관리에 대한 투자 또한 소홀하여 건설재해 요인에 대한 관리가 취약할 수밖에 없다. 건설업이 타 산업에 비해 재해율 및 사망률이 높고, 위험/특수한 작업환경, 다양한 국적 및 중장년층 근로자가 많다는 특성을 보았을 때, 위험요인 탐색을 통한 선제적인 건설 업종 현장 안전관리는 필수적이다. 본 연구에서는 건설 업종별 체계적인 위험관리를 위한 통찰력(Insight) 확보를 위해 지난 10여 년간 발생한 약 8500여 건의 건설재해사례를 분석하고 업종별 위험요인을 도출하였다. 분석결과 사고 다발 업종과 분석변수인 발생형태, 작업내용, 기인물, 가해물 간의 상호연관성을 살펴본 결과 각 분석변수와 사고 다발 업종은 서로 상호연관성이 있는 것으로 나타났으며, 특히 작업내용의 경우 각 업종과의 상호연관성 크기가 가장 큰 것으로 나타났다. 특히 사고 다발 업종 중 철근코크리트공사업과 토공사업은 재해발생빈도가 높을 뿐만 아니라 발생형태, 작업내용, 기인물, 가해물 내 대부분의 위험요인 카테고리에서 위험성이 높은 업종으로 나타났다.