• 한국전자파학회논문지
• /
• 제30권4호
• /
• pp.261-269
• /
• 2019

본 논문은 레이돔과 같은 다층구조의 주파수 선택적 표면(frequency selective surfaces: FSS)을 설계하는데, 편파나 입사각 등 다양한 고려사항에 대한 유연성을 갖는 픽셀 형태의 주파수 선택적 표면을 설계하는 것에 관한 것이다. 픽셀 형태의 FSS를 설계할 때 이산 공간 문제를 해결할 수 있는 다양한 방법 중 이진 입자 군집 최적화(binary particle swarm optimization: BPSO) 알고리즘은 FSS의 주기구조 패턴을 결정하는데 쉽게 적용 가능한 기술 중 하나이며, 따라서 향상된 BPSO 알고리즘을 통해 롤 오프 전파 투과특성을 갖는 FSS를 효율적으로 설계하는 기법을 제안하였다. 원하는 솔루션에 입자를 유도하기 위한 적합성 함수 설계에 대하여 수렴속도 문제를 해결하기 위해, '기울기'를 입력 변수로 한 적합성 함수를 적용할 경우 쉽게 원하는 전파특성을 갖는 FSS를 얻을 수 있었다.

• ETRI Journal
• /
• 제26권5호
• /
• pp.481-485
• /
• 2004

We consider electromagnetic field radiation properties of a current filament placed at the origin of a cylindrical frequency selective surface (CFSS). The CFSS consists of free standing metal strips with two-dimensional periodicity. The analysis is based on a cylindrical Floquet mode wave expansion technique. We observed that near the half wavelength resonance frequencies, there exist some specific frequencies at which the surface becomes totally transparent.

• 한국산학기술학회논문지
• /
• 제13권12호
• /
• pp.6022-6026
• /
• 2012

본 논문은 마이크로스트립 전송선로에 삽입된 주파수 선택 표면(FSSs)을 사용하여 주기적인 구조를 갖는 대역저지필터(BSF)에 관한 것이다. 제안된 대역저지필터는 변형된 크로스 루프 슬롯 (Cross-loop slot)을 단위 셀로 하여 주기적인 구조로 설계하였으며, 설계된 대역 저지 필터는 등가회로 모델과 분산 도표(dispersion diagram)로 해석하였다. 대역 저지 필터의 중심주파수(fo)는 6.6 GHz이다. 제안된 필터는 단위 셀의 개수가 증가하면 3dB 대역폭은 넓어지고 삽입손실은 줄어드는 특성이 있다. 또한 제안한 대역저지필터는 소형의 평면구조를 가지며, 한 번의 에칭으로 제작이 가능 하여 다양한 분야의 RF 필터로서 사용 가능성이 높다.

• Journal of electromagnetic engineering and science
• /
• 제9권1호
• /
• pp.46-52
• /
• 2009

This paper conducts a study on the frequency-dependent filtering and blocking effects of a variety of periodic structures, dubbed frequency selective surface(FSS). The periodic structures of interest are 1D and 2D repeated patterns of metal patches or slots sitting on the interface between the two different regions in the layered media which will show the capacitive or inductive behaviors and incorporated with the electromagnetic bandgap(EBG) geometry as another stratified media. Besides the normal substances so called double positive(DPS)-type in the layered media, metamaterials of double negative(DNG) are considered as layering components on the purpose of investigating the unusual electromagnetic phenomena. Frequency responses of transmission(absorption in terms of scattering) and reflection will be calculated by a numerical analysis which can be validated by the comparison with the open literature and demonstrated for the periodic structures embedding metamaterials or not. Most importantly, numerous examples of FSS will present the useful guidelines to have absorption or reflection properties in the frequency domain.

• 전자공학회논문지D
• /
• 제34D권9호
• /
• pp.7-14
• /
• 1997

A rigorous analysis method of electromagentic scattering from frequency selective surface with gridded square loop elements in case of oblique incident and arbitrary polarization is presented, which uses the roof-top subdomain basis function. The frequency response and polarization characteristics of the reflected wave and the transmitted wave for various widths of the grid and the conductor square loop, and for the various gaps between the grid and the conductor square loop, and for the various gaps between the grid and square loop is investigated. To confirm the validity of presented method, frequency selective surfaces with gridded square loop elements are fabricated with honeycomb structures, calculate dvalues for the frequency response of the reflected wave and the transmitted wave for arbitrary incident angle and polarization are compared with measured values.

• 한국군사과학기술학회지
• /
• 제17권3호
• /
• pp.311-317
• /
• 2014

In this paper, the flexible and reconfigurable frequency selective surface for C-band was designed using patch array and grid structure for radome and other curved surface applications. Frequency reconfigurability was obtained by varying the capacitance of varactor diode and flexibility is implemented by using flexible PCB. For the validity of the proposed structure, we fabricated the flexible and reconfigurable frequency selective structure and measured the frequency reconfigurability for different bias voltages and different curvature surfaces from the optimized design parameters. From the measurement results, we know that the proposed structure has the wideband reconfigurable frequency bandwidth of 6.05-7.08GHz. We can apply this proposed structure to the curved surface like as radome of aircraft or warship.

• Journal of electromagnetic engineering and science
• /
• 제15권4호
• /
• pp.206-212
• /
• 2015

This paper introduces new wideband antenna-filter-antenna (AFA) uniform arrays that can be utilized as frequency selective surfaces (FSS) with low loss and sharp roll-off response, which are highly desirable characteristics for millimeter wave applications. The design adopts a simple 3-layer single polarization structure consisting of two patch antennas and a resonator. Both simulations and measurements are used to characterize the performances of the proposed design. Overall results show 18.5% 10-dB bandwidth. For the targeted band the insertion loss is less than 0.2 dB. Possible applications include quasi-optical amps, grid mixers and radomes for aircraft radar antennas.

• ETRI Journal
• /
• 제29권1호
• /
• pp.36-44
• /
• 2007

The wave concept iterative procedure (WCIP) is used to analyze arbitrarily shaped frequency selective surfaces (FSS). The WCIP method is developed from the fast modal transform based on a two-dimensional fast Fourier transform algorithm. Using the proposed procedure, less computing time and memory are needed to calculate the scattering parameters of the FSS structure. The method is applied to the modeling of an FSS structure of a rectangular patch and a comparison with experimental results confirms good agreement.

• 전기전자학회논문지
• /
• 제16권4호
• /
• pp.328-334
• /
• 2012

본 논문에서는 레이더 단면적(RCS, Radar Cross Section)을 감소시키기 위한 전자파 구조로서 십자형 다이폴 슬롯을 원소로 가지며 다른 배열형태 구조를 갖는 구형 주파수 선택적 표면(FSS, Frequency Selective Surface) 구조의 전파특성을 해석하였다. 유한크기와 곡면형상을 갖는 구형 주파수 선택적 표면 구조의 주파수 특성을 해석하기 위해 RWG 함수를 적용한 3차원 모멘트법을 사용하였으며 반복법 중 하나인 BiCGSTab(Biconjugate Gradient Stabilized) 알고리즘을 적용하여 해석시간의 효율성을 개선하였다. 1m 직경을 갖는 완전도체(PEC, Perfect electric conductor)의 구에 대한 이론적 해석결과인 Mie의 RCS 특성과 비교 검증하여 제안한 해석 알고리즘의 유효함을 입증하였다. 구형 주파수 선택적 표면 구조에서 슬롯 성분의 배열 방법에 따른 RCS 변화를 관찰하여 비교하였으며, 곡면형상의 주파수 선택구조 설계시 배열의 방법도 RCS 특성에 중요한 변수가 될 수 있음을 확인하였다.

• 제어로봇시스템학회논문지
• /
• 제20권2호
• /
• pp.107-111
• /
• 2014

An SIW cavity is a useful tool to design an FSS which shows a rapid roll-off rate and insensitivity to polarizations and incident angles of electromagnetic waves. However, due to its high Q-factor, the FSS also shows narrow bandwidth which is undesirable for high-capacity communication. To address this drawback, we propose a novel technique to enhance the bandwidth while maintaining similar frequency response characteristics and minimizing the increase of the overall thickness of the SIW cavity FSS. In order to verify the performance of the technique, simulated frequency responses will be provided. Also, a parameter which affects the bandwidth will be studied. Finally the stability to polarizations and incident angles will be observed through the simulated results.