• International Journal of Naval Architecture and Ocean Engineering
• /
• 제8권2호
• /
• pp.117-126
• /
• 2016

In this paper, a numerical procedure for the natural vibration analysis of plates with openings and carlings based on the assumed mode method is extended to assess their forced response. Firstly, natural response of plates with openings and carlings is calculated from the eigenvalue equation derived by using Lagrange's equation of motion. Secondly, the mode superposition method is applied to determine frequency response. Mindlin theory is adopted for plate modelling and the effect of openings is taken into account by subtracting their potential and kinetic energies from the corresponding plate energies. Natural and frequency response of plates with openings and carlings subjected to point excitation force and enforced acceleration at boundaries, respectively, is analysed by using developed in-house code. For the validation of the developed method and the code, extensive numerical results, related to plates with different opening shape, carlings and boundary conditions, are compared with numerical data from the relevant literature and with finite element solutions obtained by general finite element tool.

• 한국전자통신학회논문지
• /
• 제13권5호
• /
• pp.959-964
• /
• 2018

본 논문에서는 고주파에서 동작하는 공핍형 SOI MOSFET의 드레인 전류가 유도성 기생성분에 의해서 응답지연이 일어나는 것을 처음으로 확인하였다. 공핍형 SOI MOSFET는 드레인전압 변동에 따른 드레인전류의 응답지연이 발생하기 때문에 일반적인 MOSFET 고주파모델로는 해석할 수가 없다. 이러한 응답지연은 non-quasi-static 효과로 설명될 수 있으며 SOI MOSFET에서는 일반적인 MOSFET에 비해 유도성 기생성분에 의해 응답지연이 크게 발생하게 된다. 본 논문에서 제시한 고주파모델을 이용하여 공핍형 SOI MOSFET의 드레인 응답지연을 잘 표현하는지 확인한다.

• Structural Monitoring and Maintenance
• /
• 제9권2호
• /
• pp.107-127
• /
• 2022

Structural health monitoring (SHM) has been related to damage identification with either operational loads or other environmental loading playing a significant complimentary role in terms of structural safety. In this study, a non-parametric method of time frequency analysis on the measurement is used to address the time-frequency representation for modal parameter estimation and system damage identification of structure. The method employs the wavelet decomposition of dynamic data by using the modified complex Morlet wavelet with variable central frequency (MCMW+VCF). Through detail discussion on the selection of model parameter in wavelet analysis, the method is applied to study the dynamic response of both steel structure and reinforced concrete frame under white noise excitation as well as earthquake excitation from shaking table test. Application of the method to building earthquake response measurement is also examined. It is shown that by using the spectrogram generated from MCMW+VCF method, with suitable selected model parameter, one can clearly identify the time-varying modal frequency of the reinforced concrete structure under earthquake excitation. Discussions on the advantages and disadvantages of the method through field experiments are also presented.

• Geomechanics and Engineering
• /
• 제28권1호
• /
• pp.25-33
• /
• 2022

The energy transferred on drill rods by dynamic impact mainly determines the penetration depth for in-situ tests. In this study, the dynamic response and transferred energy of drill rods are determined from the frequency of the stress waves. AW-type drill rods of lengths 1 to 3 m are prepared, and strain gauges and an accelerometer are installed at the head and tip of the connected rods. The drill rods are hung on strings, allowing free vibration, and then impacted by a pendulum hammer with fixed potential energy. Increasing the rod length L increases the wave roundtrip time (2L/c, where c is the wave velocity), and hence the transferred energy at the rod head. At the rod tip, the first velocity peak is higher than the first force peak because a large and tensile stress wave is reflected, and the transferred energy converges to zero. The resonant frequency increases with rod length in the waveforms measured by the strain gauges, and fluctuates in the waveforms measured by the accelerometer. In addition, the dynamic response and transferred energy are perturbed when the cutoff frequency is lower than 2 kHz. This study implies that the resonant frequency should be considered for the interpretation of transferred energy on drill rods.

• 대한토목학회논문집
• /
• 제12권4_1호
• /
• pp.129-136
• /
• 1992

압력식(壓力式) 파고계(波高計)에서 측정(測定)되어진 압력파형(壓力波形)으로부터 수위변동(水位變動)을 추정(推定)하는 방법(方法)에 대해서 1) Fast Fourier Transform Method(FFTM), 2) Local Curvature Method(LCM), 3) Individual Wave Method(IWM)의 3가지 방법(方法)을 비교(比較)하여, 천해역(淺海域)에 있어서의 파랑측정(波浪測定)에 대한 압력식(壓力式) 파고계(波高計)의 적용성(適用性)에 대해 검토(檢討)했다. 그 결과(結果) 다음과 같은 결론(結論)을 얻었다. 1) 측정(測定)되어진 압력파형(壓力波形)으로부터 수위변동(水位變動)을 추정(推定)할 때에 사용(使用)되어지는 이론선형응답함수(理論線形應答函數)(Hp=coshkh/coshk(h+z)의 적용가능범위(適用可能範圍)(cut-off-frequency)는 $kh{\leq}3.0$이다. 그리고 kh > 3.0의 영역(領域)에 있어서의 이론선형응답함수(理論線形應答函數)는 일정치(一定値)를 부여함으로써 매우 정도높은 수위변동(水位變動)을 얻을 수 있다. 2) LCM에 의한 수위변동(水位變動)의 변환(變換)에 있어서는 측정(測定)된 압력파형(壓力波形)속에 포함되어 있는 단주기파(短週期波)들에 의해 크게 영향(影響)을 받는다. 그러므로, kh > 1.5인 영역(領域)의 압력변동(壓力變動)을 무시할 필요(必要)가 있다. 3) FFTM 및 IWM에 의해 추정(推定)되어진 통계량(統計量)의 재현성(再現性)은 양호하고, 특(特)히 평균주기(平均週期)의 재현성(再現性)으로부터 비선형성(非線型性)이 강한 영역(領域)에 있어서는 IWM이 유효(有效)한 수단이라고 사려되어진다.

• 한국음향학회지
• /
• 제39권3호
• /
• pp.200-206
• /
• 2020

본 논문은 공간 응답 변화량(Spatial Response Variation, SRV)을 사용한 광대역 빔 형성 방법을 제안한다. SRV를 정규화 항으로 적용하여 목표하는 주파수 대역에서 주 빔 폭의 변동이 약 1도 이내로 적은 양질의 광대역 빔패턴을 얻도록 하였다. 설계 실험에서 제안 된 방법이 기존 방법보다 낫다는 것을 입증하였다.

• 전산구조공학
• /
• 제9권4호
• /
• pp.107-115
• /
• 1996

변위응답은 교량구조의 진동특성을 결정하는데 중요한 인자 중의 하나이다. 계측된 가속도 데이타를 진동수 영역에서 적분하여 변위응답을 경제적이고 합리적으로 구할 수 있다. 이를 위해 계측된 가속도 데이타를 이산화하기 위해 적절한 표본추출 진동수가 제시되었다. 캔틸레버 보를 이용한 실내시험에서 직접 계측된 변위와 적분된 변위는 서로 잘 일치하였다. 평가된 변위응답으로부터 구한 모우드 형상도 해석치와 근접하므로 개발된 방법은 실제로 효율적으로 사용될 수 있음을 입증하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2003년도 추계학술대회
• /
• pp.227-232
• /
• 2003

As the most precision equipment requiring very strict vibration environment are vulnerable to the surrounding vibration condition, they adapt the passive or active vibration isolation system. When it comes to the passive isolation system, the resonance of the isolation system causes excessive resonance response, and finally results in the degrade the equipment performance. This paper deals with the active control method to control this resonance induced response, and includes the experiment on the active control for controlling the resonance response on the table against the excitation of the same frequency with the natural frequency of the isolation system. The electromagnetic actuator was designed and the control effect was verified by the experiment. The experiment showed that the electromagnetic actuator is effective for controlling the low frequency isolation resonance response of the precision equipment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.363.2-363
• /
• 2002

The spectrum of impulse response signal from an impulse hammer testing is widely used to obtain frequency response function(FRF) of the structure. However the FRFs obtained from impact hammer testing have not only leakage errors but also finite record length errors when the record length for the signal processing is not sufficiently long. The errors cannot be removed with the conventional signal analyzer which treats the signals as if they are always steady and periodic. (omitted)

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.71-77
• /
• 2002

The spectrum of impulse response signal which is obtained from an impulse hammer testing is used for frequency response function, nevertheless it has serious faults when the record length for the signal processing is not very long. The faults cannot be avoided with the conventional signal analyzer that is processing all the signals as if they are always periodic. The signals generated by the impact hammer are undoubtedly non-periodic because of the damping, and are acquired for limited recording time due to the memory as well as the computation performance of the signal analyzer. This paper will make clear the relation between the faults and the length of recording time, and propose the way for solving the faults.