• 제목/요약/키워드: frequency perturbation

검색결과 258건 처리시간 0.025초

연속모음에서의 Electroglottograph 신호해석에 의한 후두기능 평가 (Layngeal Function Assessment by Electroglottographic Signal Analysis during Sustained Vowel Phonation)

  • 송철규;이명호
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1994년도 춘계학술대회
    • /
    • pp.79-81
    • /
    • 1994
  • Petubation in the fundamental frequency and in the peak amplitude of the EGG signal derived with a four-electrode EGG system were investigated for the purpose of developing useful measures for the detection of layngeal pathology. The data were compared to the degree of amplitude perturbation and frequency perturbation. There was a close relation between amplitude perturbation and frequency perturbation analysis of EGG signal and degree of laryngeal pathology.

  • PDF

섭동 입력을 사용한 구배 값 추정용 센서 신호 처리 (Sensor Signal Processing for Estimating Gradient Values using Perturbation Input)

  • 이수용
    • 센서학회지
    • /
    • 제26권4호
    • /
    • pp.251-258
    • /
    • 2017
  • According to recent studies by scientists about how to search for food, homes and the mates, it is found that the gradient information plays a key role. From cells to insects and large animals, they mostly either have special sensing organism or use a strategy to measure the gradient. Use of a perturbation as an additional input is introduced for sensor signal processing in order to get the gradient information. Different from typical approach, which calculates the gradient from differentiation, the proposed processing is done by a form of integration, thus it is very robust to noise. Discrete time domain analyses are given for one, two and three input functions for the estimation of the gradients. The amplitude and the frequency of the perturbation are two important parameters for this approach. A quantitative index to measure the effects of the amplitude is developed based on the linear regression analysis. The frequency of the perturbation is to be selected high enough to finish one period of the perturbation before the property is changed significantly with respect to time. Another quantitative index is proposed for guiding the selection of the frequency.

국소교란이 있는 난류박리 재부착유동의 이산와류 수치해석 (Discrete Vortex Simulation of Turbulent Separated and Reattaching Flow With Local Perturbation)

  • 정용만;성형진
    • 대한기계학회논문집
    • /
    • 제18권2호
    • /
    • pp.479-491
    • /
    • 1994
  • Discrete vortex method was applied for simulating an active control of turbulent leading- edge separation bubble. The leading-edge separation zone was perturbed by a time-dependent sinusoidal perturbation of different frequencies and levels. In order to describe the local sinusoidal perturbation at the separation point, a source pulsation vortex technique was proposed. The present two-dimensional vortex simulations were qualitatively compared with the experimental results for a blunt circular cylinder, where perturbation was introduced along the square-cut leading edge of the cylinder $(Kiya et al.^{(6,7)}).$ It was found that the reattachment length attained a minimum point at low levels of perturbation and two minima at a moderate higher perturbation frequency. The effects of local perturbation on the evolution of leading-edge separation bubble were scrutinized by comparing the perturbed flow with the natural flow. These comparisons were made for the distributions of mean velocity and its velocity fluctuations, intermittency and wall velocity. The motions of instantaneous reattachment in the space-time domain were demonstrated, which were also compared with the experimental findings. In order to investigate the reduction mehanism of reattachment length in the separation bubble, various cross-correlations for velocity and pressure and the relevant convection velocities were evaluated. It was observed that the convection velocity was closely associated with its corresponding pulsationg frequency.

A-mode 불안정성 영역에서 교란유동장에 놓인 원형실린더 후류의 천이지연과 유동공진의 발생 (Suppression of Wake Transition and Occurrence of Lock-on Downstream of a Circular Cylinder in a Perturbed Flow in the A-mode Instability Regime)

  • 김수현;배종헌;유정열
    • 대한기계학회논문집B
    • /
    • 제31권8호
    • /
    • pp.702-710
    • /
    • 2007
  • Direct numerical simulation (DNS) is performed to investigate suppressed wake transition and occurrence of lock-on in the wake of a circular cylinder disturbed by sinusoidal perturbation at the Reynolds number of 220 (A-mode instability regime). The sinusoidal perturbation, of which the frequency is near twice the natural shedding frequency, is superimposed on the free stream velocity. It is shown that the wake transition behind the circular cylinder can be suppressed due to the perturbation of the free stream velocity. This change causes a jump in the Strouhal number from the value corresponding to A-mode instability regime to the value corresponding to retarded wake transition regime (extrapolated from laminar shedding regime) in the Strouhal-Reynolds number relationship. As a result, vortex shedding frequency is locked on the perturbation frequency depending not on the natural shedding frequency but on the modified shedding frequency.

수력파동에 의한 분무변화 및 저주파 연소불안정에의 영향 예측 (The change of spray characteristics on hydraulic acoustic wave influence and prediction of low combustion instability)

  • 김태균;이상승;윤웅섭
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
    • /
    • pp.152-160
    • /
    • 2004
  • Studies to investigate the influence on hydraulic acoustic wave were conducted using pressure swirl atomizer under making frequency range from 0 to 60Hz using water as a propellant. Pressure oscillation from hydraulic sources gives a strong influences on atomization and mixing processes. The ability to drive these low frequency pressure oscillations makes spray characteristics changeable. The effect of pressure perturbation and its spray characteristics showed that low injector pressure with pressure pulsation gives more significantly than high injector pressure with pressure perturbation in SMD, spray cone angle, breakup length. Moreover, this data could be used for prediction of low combustion instability getting G factor.

  • PDF

외란 관측기를 가지는 슬라이딩모드 제어기 설계 (Design of Siding Mode Controller with Peturbation Estimation)

  • 김낙인;이종원
    • 대한기계학회논문집A
    • /
    • 제24권4호
    • /
    • pp.866-873
    • /
    • 2000
  • Sliding mode control(SMC) incorporated with perturbation compensation is developed here to reduce the low-frequency tracking error in the presence of wide-band frequency perturbations for a nonlinear dynamic system. The control scheme is designed for estimation of low frequency perturbations with employment of the Time Delay Control and low-pass filter. It is shown that the SMC with perturbation compensation is far superior to the conventional SMC in tracking control of the dynamic systems under model uncertainties and external disturbance conditions.

FIV 시험루프의 유동기인 진동 신호분석 (Flow-Induced Vibration Signal Analysis of the FIV Test Loop)

  • 이강희;강흥석;윤경호;송기남
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 추계학술대회
    • /
    • pp.601-606
    • /
    • 2004
  • Vibration spectrums of the test loop according to flow conditions were analyzed in order to identify the sources of vibration at peak frequencies. While a flow condition of the sweep test was changed by varying pump rotational speed from 450 rpm to 1500 rpm by the step 150 rpm, midspan acceleration of the test section in width-direction and dynamic pressure perturbation in the test section were measured. Other sources of vibration due to the flow structure interactions, such as acoustic resonance, blade pulsing frequency and bellows wrinkles, were investigated. Pressure perturbation in the section and acoustic resonance due to branch pipe give major effects to the vibration of the test section in high frequency range of 1.5 kHz to 2.8 kHz.

  • PDF

광디스크를 위한 주파수 적응 알고리즘과 함께하는 강인 출력 제어기 (Robust Output Regulator with Frequency Adaptation Algorithm for Optical Disc Drives)

  • 김상현;김형종;심형보
    • 전자공학회논문지SC
    • /
    • 제48권4호
    • /
    • pp.17-24
    • /
    • 2011
  • 본 논문에서는 알 수 없는 주파수를 가지는 주기적인 외란이 존재하는 광디스크 드라이브에 대하여 주파수 적응 알고리즘과 출력 제어기를 추가하여 외란을 제거하는 제어기법을 제안한다. 여기서 IMP(internal model principal)에 기반을 두는 주파수 적응 알고리즘은 주기적인 외란의 주파수를 알아내는 역할을 한다. 전체 시스템의 안정도 및 외란제거 성능은 특이섭동이론(singular perturbation theory)으로 증명된다. 본 논문의 기여는 주파수 범위에 따른 설계의 제약이 없다는 점과 모델 불확실성이 존재할 때도 외란을 제거할 수 있다는 점을 들 수 있다.

RLSN 예측기 기반 섭동 추정기를 갖는 슬라이딩 모드 제어 (Sliding Mode Control with RLSN Predictor-Based Perturbation Estimation)

  • 남윤주;이육형;박명관
    • 대한기계학회논문집A
    • /
    • 제30권8호
    • /
    • pp.880-888
    • /
    • 2006
  • This paper presents the sliding mode control with the perturbation estimator for a nonlinear control system in the presence of perturbations including external disturbances, unpredictable parameter variations, ana unstructured dynamics. The proposed perturbation estimator is based on the Recursive Linear Smoothed Newton predictive algorithm so that it is effective to attenuate an undesired noise in high frequency band and to predict the present perturbation signal from the previous ones. Compared to conventional sliding mode control (SMC) and sliding mode control with perturbation estimation (SMCPE) introduced by Elmali and Olgac, the control algorithm proposed in this study can offer better tracking control performances and more feasible estimation characteristics. The effectiveness and superiority of the proposed control strategy are demonstrated by a series of simulations on the position tracking control of a simple two-link robot manipulator subject to velocity feedback signals including white noises.

평행라인 피봇식 추력베어링의 동특성 해석 (Dynamic Characteristics of Parallel tine Pivoted Pad Thrust Bearing)

  • 이경우;김종수;제양규
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 1999년도 제29회 춘계학술대회
    • /
    • pp.111-118
    • /
    • 1999
  • In this paper, linearized dynamic characteristics of parallel line pivoted pad thrust bearing(hereinafter refer to PLP thrust bearing) was analyzed by perturbation method with inlet pressure. Inlet pressure and excitation frequency irfluence dynamic characteristics of PLP thrust bearing at all operating condition, such as angular pivot position, mass of pad. Therefore, the characteristics is have to analyzed with inlet pressure, excitation frequency, mass of pad and thickness of pad. Otherwise, the analysis is able to estimate the characteristics over or under.

  • PDF