• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.16 no.2
• /
• pp.23-32
• /
• 2012

Objectives : The purpose of this research is to develop the clinical pathway for optimizing the integrative medical service (oriental-western integrated medical service) and to analyze the clinical pattern of the integrative patients who received the oriental-western integrated medical service. Methods : This research developed the clinical pathway by interviewing with doctors, nursing and experts at K Medical Center. To analyze the clinical patterns, this research used 860 integrative patients and 6345 non-integrative patients at K Medical Center since 2007. Results and Conclusions : 1. We developed the clinical pathway for optimizing the integrative medical service. 2. Comparing the clinical pattern of the integrative patients with the non-integrative patients, the results indicated that the interval and frequency of the integrative patients is shorter than that of the non-integrative patients. 3. Comparing the medical treatment type, the integrated patients take much more medical care and more frequently participate in medical treatment. 4. In conclusion, it is different that the clinical pathway of the integrative medical service from the non-integrative medical service and the integrative medical treatment is more effective than the non-integrative medical treatment.

• Smart Media Journal
• /
• v.3 no.4
• /
• pp.16-21
• /
• 2014

HEVC is the latest joint video coding standard with ITU-T SG16 WP and ISO/IEC JTC1/SC29/WG11. Its coding efficiency is about two times compared to H.264 high profile. Intra prediction has 35 directional modes including dc and planer. However an accurate mode decision on lots of modes with SSE is too costly to implement it with hardware. The key idea of this paper is a DCT shared architecture to reduce the complexity of HEVC intra encoder. It is to use same DCT block to quantize as well as to calculate SSE in RDO. The proposed intra encoder uses two step mode decision to lighten complexity with simplified RDO blocks and shares the transform resources. Its BD-rate increase is negligible at 20% on hardware aspect and the operating clock frequency is 300MHz@60fps on FHD ($1920{\times}1080$) image.

• Journal of Sensor Science and Technology
• /
• v.9 no.4
• /
• pp.288-296
• /
• 2000

Thin-film chromel-alumel multijunction thermal converters with a low output resistance of $64{\sim}85\;{\Omega}$ showed approximately the square law-dependent input-output relation. The voltage responsivities were very low with $0.34{\sim}0.67\;V/W$ in air and $1.15{\sim}1.48\;V/W$ in vacuum, respectively, and the ac-dc voltage transfer error was very large with about +340 ppm in the frequency range of $40\;Hz{\sim}10\;kHz$ in the case of 1 V-input sinewave rms voltage. It can be concluded that the large transfer error of the thermal converter was mainly caused by the low voltage responsivity and the large heat loss due to low output resistance, which implies that the optimization for small ac-dc transfer error is required.

• Journal of Korean Society of Transportation
• /
• v.31 no.2
• /
• pp.80-89
• /
• 2013

The purpose of this research is to optimize the line planning of the intercity passenger railway. In this study, the line planning problem has been formulated into a mixed integer programming by minimizing both user costs (passenger's total travel time) and operator costs (operation, maintenance and vehicle costs) with multiple train types. As a solution algorithm, the branch-and-bound method is used to solve this problem. The change of travel demand, train speed and the number of schedules have been tested through sensitivity analysis. The optimal stop-schedules and frequency as well as system split with respect to each train type have been found in the case study of Kyoung-bu railway line in Korea. The model and results of this research are useful to make a decision for railway operation strategy, to analyze the efficiency of new railway systems and to evaluate the social costs of users and operators.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.2821-2839
• /
• 2015

Energy consumption by large computing systems has become an important research theme not only because the sources of energy are depleting fast but also due to the environmental concern. Computational grid is a huge distributed computing platform for the applications that require high end computing resources and consume enormous energy to facilitate execution of jobs. The organizations which are offering services for high end computation, are more cautious about energy consumption and taking utmost steps for saving energy. Therefore, this paper proposes a scheduling technique for Minimizing Energy consumption using Adapted Genetic Algorithm (MiE-AGA) for dependent tasks in Computational Grid (CG). In MiE-AGA, fitness function formulation for energy consumption has been mathematically formulated. An adapted genetic algorithm has been developed for minimizing energy consumption with appropriate modifications in each components of original genetic algorithm such as representation of chromosome, crossover, mutation and inversion operations. Pseudo code for MiE-AGA and its components has been developed with appropriate examples. MiE-AGA is simulated using Java based programs integrated with GridSim. Analysis of simulation results in terms of energy consumption, makespan and average utilization of resources clearly reveals that MiE-AGA effectively optimizes energy, makespan and average utilization of resources in CG. Comparative analysis of the optimization performance between MiE-AGA and the state-of-the-arts algorithms: EAMM, HEFT, Min-Min and Max-Min shows the effectiveness of the model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.10B
• /
• pp.911-918
• /
• 2008

In this paper, we propose new cell structures using multi-hop Relay Station(RS) based on IEEE802.16j in Narrow-Beam Trisector Cell (NBTC) and Wide-Beam Trisector Cell (WBTC), which are two methods for cell sectorization using 3-sector directional antennas. Then, we analyze our proposed structures compared with the existing system which does not use any RS about the numbers of optimized Base Station (BS) and multi-hop relay, the extended BS coverage, and the deployment cost according to the traffic density using optimization model. According to the results, we know the reduction of total deployment cost of the proposed systems and that WBTC is suitable when the traffic density is high and NBTC is suitable when the traffic density is low in our proposed multi-hop based NBTC and WBTC structures.

• Journal of the Korean Ceramic Society
• /
• v.39 no.12
• /
• pp.1158-1163
• /
• 2002

An Ge/B-doped optical fiber with high photosensitivity was fabricated to induce large second-order optical nonlinearity by UV poling. It was found that long period fiber gratings were inscribed on the fiber by the 248 nm KrF excimer laser irradiation with pulse energy of 116 mJ/$cm^2$ and pulse frequency of 10 Hz without hydrogen loading treatment. The photosensitivity was measured by use of the long period fiber grating pair method and the refractive index change of 3.3$10{\times}^{-3}$ was found to be induced in the core of the optical fiber by the KrF excimer laser irradiation of 8.67 kJ/$cm^2$. An H-shaped optical fiber was also fabricated for the UV poling through optimization of the fiber drawing condition.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.5
• /
• pp.25-32
• /
• 2000

In this paper, we consider the effects on the bandpass filter characteristics due to the phase variation of the inverters with frequency, which introduces the deviations of the bandpass filter characteristics from the design goals. In order to resolve these kinds of problems, we proposed novel inverter configurations. And we derived the inverter formulas for the proposed inverter configuration. By employing the proposed inverter configuration and the derived formulas, bandpass filters are designed and simulated. In order to show the validity of the proposed design method, the simulation characteristics are compared with design results by conventional design procedures. Compared results show the compensation of the deviations of bandpass filter characteristics without any optimization or iterative design procedures and additional calculation efforts.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.8
• /
• pp.33-44
• /
• 2000

The lightning with high voltage and current can enter the basestations for mobile communication through their antenna. The device which can protect the basestation against the lightning, is surge arrestor. In this paper, the concept, kind, operating mechanism, design and fabrication of surge arrestor were studied. Based on the studied data, variable surge arrestors were designed for the current mobile communication service like a cellular, GSM and PCS and the next generation mobile communication like a IMT-2000. Computer simulation for the prediction of their characteristics and inner structure optimization for the improvement of their electrical characteristics were carried with high frequency 3D structure simulator. Quarter wave short stub surge arrestors for IMT-2000 were fabricated with their final design and then the measurement of electrical characteristics and the lightning test were executed. As a results of measurement, we obtained below 1.05 of VSWR, -0.035 dB of insertion loss, -150 dBc of intermodulation and 7∼ll V of residual voltage.

• Journal of Korea Water Resources Association
• /
• v.46 no.4
• /
• pp.389-400
• /
• 2013

In this study, a conventional pipeline unsteady friction model has been integrated into Levenberg Marquardt method to calibrate friction coefficient in a pipeline system. The method of characteristics has been employed as the modeling platform for the frequency dependant model of unsteady friction. In order to obtain Hessian and Jacobian matrix for optimization, the direct differentiation of pressure to friction factor was calculated and sensitivities to friction for heads and discharges were formulated for implementation to the integration constant in the characteristic method. Using a hypothetical simple pipeline system, time series of pressure, introduced by a sudden valve closure, were obtained for various Reynolds numbers. Convergency in fiction factors were evaluated both in steady and unsteady friction models. The comparison of calibration performance between the proposed method and genetic algorithm indicates that faster and stabler behaviour of Levenberg Marquardt method than those of evolutionary calibration.