• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.6C
• /
• pp.609-614
• /
• 2003

In this paper, a new filter structure to improve frequency response characteristics in CIC(Cascaded Integrator-Comb) decimation filters is proposed. Conventional filters improve passband characteristics, but they make worse aliasing band characteristics. In this paper, we propose a new filter which is called IFOP(Interpolated Fourth-Order Polynomials). By using this proposed filter, passband droop and aliasing band attenuation are simultaneously improved. Since proposed filter needs only one multiplication, computation is not much. And overall linear phase characteristics are maintained since the proposed filter is also linear phase. Finally, implementation cost of the proposed filter is compared with those of conventional filters.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.179-183
• /
• 2007

This paper is to implement a low power frequency Shift Keying(FSK) receiver using Xilinx System Generator. The receiver incorporates a 16 point Fast Fourier Transform(FFT) for symbol detection. The design units of the receiver are digital designs for better efficiency and reliability. The receiver functions on one bit data processing and supports data rates 10kbps. In addition CORDIC algorithm is used for avoiding complex multiplications while computing FFT, multiplication of twiddle factor is substituted by rotators. The design and simulation of the receiver is carried out in Simulink, then the simulink model is translated to a hardware model to implement FPGA using Xilinx System Generator and to verify performance.

• Structural Engineering and Mechanics
• /
• v.58 no.5
• /
• pp.847-868
• /
• 2016

In this study, the free vibration analysis of axially moving beams is investigated according to Reddy-Bickford beam theory (RBT) by using dynamic stiffness method (DSM) and differential transform method (DTM). First of all, the governing differential equations of motion in free vibration are derived by using Hamilton's principle. The nondimensionalised multiplication factors for axial speed and axial tensile force are used to investigate their effects on natural frequencies. The natural frequencies are calculated by solving differential equations using analytical method (ANM). After the ANM solution, the governing equations of motion of axially moving Reddy-Bickford beams are solved by using DTM which is based on Finite Taylor Series. Besides DTM, DSM is used to obtain natural frequencies of moving Reddy-Bickford beams. DSM solution is performed via Wittrick-Williams algorithm. For different boundary conditions, the first three natural frequencies that calculated by using DTM and DSM are tabulated in tables and are compared with the results of ANM where a very good proximity is observed. The first three mode shapes and normalised bending moment diagrams are presented in figures.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.2
• /
• pp.133-136
• /
• 1999

Different kinds of cytokinins and auxins were tested for both shoot induction and rooting in a rare species, Abeliophyllum distichum Nakai. BA in WPM medium was the most effective in shoot induction, whereas zeatin seemed to be the most suitable for shoot elongation. Kinetin, at the concentration of 2.0~5.0 mg/L showed an effect in shoot induction, but the effect was inferior to BA and zeatin. Rapid shoot elongation could be achieved when the cultures were maintained on the diffuse light condition (below 500 lux) regardless of cytokinin treatments. For in vitro rooting, IBA was investigated as the best type of auxin tested when half strength GD medium was incorporated. The frequency of rooting using the plant growth regulator and medium just mentioned above was revealed as approximately 90%. In addition, the survival rate of rooted plantlets was almost 100% in an artificial soil mixture.

• The KIPS Transactions:PartB
• /
• v.11B no.3
• /
• pp.303-308
• /
• 2004

The Gabor cosine and sine transform can be applied to image and video compression algorithm by representing image frequency components locally The computational complexity of forward and inverse matrix transforms used in the compression and decompression requires O($N^3$)operations. In this paper, the length of basis functions is truncated to produce a sparse basis matrix, and the computational burden of transforms reduces to deal with image compression and reconstruction in a real-time processing. As the length of basis functions is decreased, the truncation effects to the energy of basis functions are examined and the change in various Qualify measures is evaluated. Experiment results show that 11 times fewer multiplication/addition operations are achieved with less than 1% performance change.

• International Journal of Computer Science & Network Security
• /
• v.22 no.9
• /
• pp.414-426
• /
• 2022

Elliptic Curve Cryptography (ECC) is one of the finest cryptographic technique of recent time due to its lower key length and satisfactory performance with different hardware structures. In this paper, a High Throughput Multiplier architecture is introduced for Elliptic Cryptographic applications based on concurrent computations. With the aid of the concurrent computing approach, the High Throughput Concurrent Computation (HTCC) technology that was just presented improves the processing speed as well as the overall efficiency of the point-multiplier architecture. Here, first and second distinct group operation of point multiplier are combined together and synthesised concurrently. The synthesis of proposed HTCC technique is performed in Xilinx Virtex - 5 and Xilinx Virtex - 7 of Field-programmable gate array (FPGA) family. In terms of slices, flip flops, time delay, maximum frequency, and efficiency, the advantages of the proposed HTCC point multiplier architecture are outlined, and a comparison of these advantages with those of existing state-of-the-art point multiplier approaches is provided over GF(2¹⁶³), GF(2²³³) and GF(2²⁸³). The efficiency using proposed HTCC technique is enhanced by 30.22% and 75.31% for Xilinx Virtex-5 and by 25.13% and 47.75% for Xilinx Virtex-7 in comparison according to the LC design as well as the LL design, in their respective fashions. The experimental results for Virtex - 5 and Virtex - 7 over GF(2²³³) and GF(2²⁸³)are also very satisfactory.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.81-86
• /
• 2023

Recently, demand for embedded systems requiring low power and high specifications has been increasing, and RISC-V processors are being widely applied. RISC-V, a RISC-based open instruction set architecture (ISA), has been developed and researched by UC Berkeley and other researchers since 2010. RV32I ISA is sufficient to support integer operations such as addition and subtraction instructions, but M-extension should be defined for multiplication and division instructions. This paper proposes an RV32I, RV32IM processor, and indicates benchmark performance scores compared to an existing processor. Additionally, A non-stalling method was proposed to support a 2-stage pipelined DSP multiplier to the 5-stage pipelined RV32IM processor. Proposed RV32I and RV32IM processors satisfied a maximum operating frequency of 50 MHz on Artix-7 FPGA. The performance of the proposed processors was verified using benchmark programs from Dhrystone and Coremark. As a result, the Coremark benchmark results of the proposed processor showed that it outperformed the existing RV32IM processor by 23.91%.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.44 no.5
• /
• pp.84-93
• /
• 2007

In this paper, a Radix-8 structure for high-speed FFT is propose. Main block of the proposed FFT structure is Radix-8 DIF(Decimation In Frequency) butterfly. Even throughput of the Radix-8 FFT is twice than that of the Radix-4 FFT, implementation area of the Radix-8 is larger than that of Radix-4 FFT. But, implementation area of the proposed Radix-8 FFT was reduced by using DA(Distributed Arithmetic) for multiplication. For comparison, the 64-point FFT was implemented using conventional Radix-4 butterfly and proposed Radix-8 butterfly, respectively. The Verilog-HDL coding results for the proposed FFT structure show 49.2% cell area increment comparison with those of the conventional Radix-4 FFT structure. Namely, to speed up twice, 49.2% of area cost is required. In case of same throughput, power consumption of the proposed structure is reduced by 25.4%. Due to its efficient processing scheme, the proposed FFT structure can be used in large size of FFT like OFDM Modem.

• Journal of Information Technology Applications and Management
• /
• v.16 no.1
• /
• pp.137-148
• /
• 2009

Knowledge management becomes the key point for organizations to survive and maintain competitive advantages in the knowledge economy era. E-learning plays a vital role for the organizational learning. How to share the experience of knowledge and the success of the knowledge management has great connection with the organizational culture. This study focuses on the factors of effective E-learning as well as its relation to the organizational culture. A successful e-learning system should not only aim at different statistical variables but emphasize on : course contents, variety of teaching methods and establishes a stable network environment. A stable E-learning platform and speedy bandwidth is a must to achieve the non-barrier communication and built an interactive learning environment. To achieve success in E-learning, it is not necessary to divide the organizational culture to strengthen the course content multiplication and plans the E-learning supervisory work by the sole responsibility unit. It should establish an ample teaching frequency width and platform and also must establish the appropriate study network frequency width and hardware equipment to achieve the best E-learning effect. The interaction in different organizational culture in adapting E-learning, those Ad-hoc and Marketing Culture, are mostly influence by the external environment and have more interactive content. Those in Clan and Hierarchy Culture are affected by traditional conception and lack of interaction. Meanwhile, under the cost consideration, Clan and Ad-hoc Culture on the dynamic side prefer to spend more cost on E-Learning while the stable side, Hierarchy and Marketing culture are willing to pay more expenses on E-Learning.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.16 no.4
• /
• pp.3-12
• /
• 2006

RFID (Radio Frequency Identification) system is expected to play a critical role providing widespread services in the ubiquitous period. However, widespread use of RFID tags may create new threats to the privacy of individuals such as information leakage and traceability. It is difficult to solve the privacy problems because a tag has the limited computing power that is not the adequate resource to support the general encryption. Although the scheme of [2] protects the consumer privacy using an external agent, a tag should compute exponential operation needed high cost. We propose Self Re-Encryption Protocol (SREP) which provides song privacy without assisting of any external agent. Our SREP is well suitable to low-cost RFID system since it only needs multiplication and exclusive-or operation.