• Journal of Sensor Science and Technology
• /
• v.31 no.5
• /
• pp.324-329
• /
• 2022

This paper proposes a shift-register-based multichannel ultrasonic focusing delay control method using a complex programmable logic device (CPLD) for a high resolution of ultrasonic focusing system. The proposed method can achieve the ultrasonic focusing through the delay control of driving signals of each ultrasonic transducer of an ultrasonic array. The delay of the driving signals of all ultrasonic channels can be controlled by setting the shift register in the CPLD. The experiment verified that the frequency of the clock used for the delay control increased, the error of the focusing point decreased, and the diameter of the focusing point decreased as the length of the shift register in the proposed method. The proposed method used only one CPLD for ultrasonic focusing and did not require to use complex hardware circuits. Therefore, the resources required for the design of an ultrasonic focusing system could be reduced. The proposed method can be applied to the fields of human computer interaction (HCI), virtual reality (VR) and augmented reality (AR).

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.135-140
• /
• 2006

Numerical computations are made to predict wave loads on a vertical cylinder in an extreme wave. To generate the extreme wave, a frequency-focused unidirectional wave is adopted in three-dimensional numerical wave tank. The mathematical formulation is wide in the scope of the potential theory with fully nonlinear free surface conditions. As a numerical method, finite element method based on variational principle is applied. Comparisons between the present numerical results and the previous computation data. show a good agreement.

• Smart Structures and Systems
• /
• v.8 no.3
• /
• pp.303-320
• /
• 2011

Comparing to active damage monitoring, impact localization on composite by using time reversal focusing method has several difficulties. First, the transfer function of the actuator-sensor path is difficult to be obtained because of the limitation that no impact experiment is permitted to perform on the real structure and the difficulty to model it because the performance of real aircraft composite is much more complicated comparing to metal structure. Second, the position of impact is unknown and can not be controlled as the excitation signal used in the active monitoring. This makes it not applicable to compare the difference between the excitation and the focused signal. Another difficulty is that impact signal is frequency broadband, giving rise to the difficulty to process virtual synthesis because of the highly dispersion nature of frequency broadband Lamb wave in plate-like structure. Aiming at developing a practical method for on-line localization of impact on aircraft composite structure which can take advantage of time reversal focusing and does not rely on the transfer function, a PZT sensor array based phase synthesis time reversal impact imaging method is proposed. The complex Shannon wavelet transform is presented to extract the frequency narrow-band signals from the impact responded signals of PZT sensors. A phase synthesis process of the frequency narrow-band signals is implemented to search the time reversal focusing position on the structure which represents the impact position. Evaluation experiments on a carbon fiber composite structure show that the proposed method realizes the impact imaging and localization with an error less than 1.5 cm. Discussion of the influence of velocity errors and measurement noise is also given in detail.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.5 s.164
• /
• pp.705-716
• /
• 2007

The purpose of this study was to examine the relationship structure in TV home shopping focusing on purchasing frequency and gender. Subjects for this study were 300 customers who had purchased fashion products in TV home shopping. For date analysis, factor analysis, t-test, correlation analysis and path analysis were used. As the result, when comparing groups by the purchasing frequency, the group which had higher purchase experiences had significant relationship between trust and commitment than other group of lower purchase experiences. There were statistically significant differences in 'service', 'benefits', 'influence', 'security' variables between purchasing frequency groups. Also when comparing groups by the gender, both men and women had 'relationship maintenance intention' in CRM. However, women had the effects from 'trust' to 'commitment', while men had not effects. However, there were statistically significant differences in 'service', 'information', 'reputation', 'influence' variables between men and women. Based on these results, TV home shopping fashion marketing strategies would be suggested.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.155-158
• /
• 2001

A new method for simultaneous multiple transmit focusing using orthogonal weighted FM chirp is proposed. Weighted chirp signals focused at different depths are transmitted at the same time. These chirp signals are mutually orthogonal in the approximate sense that the autocorrelation function of each signal has a narrow mainlobe width and low sidelobe levels, and the crosscorrellation function of any pair of the signals has smaller values than the sidelobe levels of each autocorrelation function. This means that each weighted chirp signal can be separately compressed into a short pulse, focused individually and combined with other focused beams to form a frame of image. Theoretically, any two chirp signals defined in two nonoverlapped frequency bands are mutually orthogonal. In the present work, however, a fractional overlap of adjacent frequency bands, by up to 25%, were permitted to design more chirp signals within a given transducer bandwidth. The crosscorrelation values due to the frequency overlap could be reduced by alternating the direction of frequency sweep of the adjacent chirp signals. The simulation results show that this method can improve the lateral resolution of image without sacrifice in the frame rate compared with the conventional pulse system.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.20 no.2
• /
• pp.11-25
• /
• 2024

This study aims to analyze research trends in digital twin focusing on Germany, the US, and Korea. In Elsevier's Scopus, we collected 4,657 papers about digital twin published in from 2019 to 2023. Keyword frequency and centrality analysis were conducted on the abstracts of the collected papers. Through the obtained keyword frequencies, we tried to identify keywords with high frequency of occurrence and through centrality analysis, we tried to identify central research keywords for each country. In each country, 'digital_twin', 'machine_learning', and 'iot' appeared as research keywords with the highest interest. As a result of the centrality analysis, research on digital twin, simulation, cyber physical system, Internet of Things, artificial intelligence, and smart manufacturing was conducted as research with high centrality in each country. The implication for Korea is that research on virtual reality, digital transformation, reinforcement learning, industrial Internet of Things, robotics, and data analysis appears to have been conducted with low centrality, and intensive research in related areas appears to be necessary.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.130-131
• /
• 2000

One of the more promising proposals for guiding and focusing neutral atoms involves dark hollow laser beams. When the frequency of the laser is detuned to the blue of resonance, the dipole force the atoms feel in the light confines them to the dark core where the atoms can be transported with minimal interaction with the light. The ability of the all-light atom guides to transport large number of ultracold atoms for long distances without physical walls leads to the possibility of a versatile tool for atom lithography, atom interferometry, atomic spectroscopy as well as for transporting and manipulating Bose-Einstein condensates. Furthermore since the atoms transported in all-light atom guides do not come into contact with matter, they can in principle be used to transport antimatter as well. The ability to vary the core size of the hollow beam makes the all-light atom guide potentially useful for focusing neutral atoms. The atoms could be focused as tight as the core size of the hollow beam at its waist. This new focusing scheme, called the atom funnel, would not show spherical and chromatic aberrations that conventional harmonic focusing suffers from. (omitted)

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.11a
• /
• pp.506-509
• /
• 2006

Shaped Sound Focusing is defined as the generation of acoustically bright shape in space using multiple sources. The acoustically bright shape is a spatially focused region with relatively high acoustic potential energy level. In view of the energy transfer, acoustical focusing is essential because acoustic energy is very small to use other type of energy. Practically, focused sound shape control not a point is meaningful because there are so many needs to enlarge the focal region especially in clinical uses and others. If focused sound shape can be controlled, it offers various kinds of solutions for clinical uses and others because a regional focusing is essentially needed to reduce a treatment time and enhance the performance of transducers. For making the shaped-sound field, control variables, such as a number of sources, excitation frequency, source positioning, etc., should be taken according to geometrical sound shape. To verify these relations between them, wavenumber domain matching method is suggested because wavenumber spectrum can provide the information of control variables of sources. In this paper, the procedures of shaped sound focusing using wavenumber domain matching and relations between control variables and geometrical sound shape are covered in case of an acoustical ring.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.512-514
• /
• 2008

In this paper, a new electromagnetic circuit is proposed for an optical pickup actuator with high sensitivity. Contrary to those of conventional actuators, the proposed circuit has two focusing coils which are diagonally placed at the front and rear of a moving part. The configuration which makes the effective length of the focusing coil longer and the moving part lighter, is helpful in increasing the sensitivity of the actuator. However, the asymmetry of the moving part by two focusing coils causes flexible node vibrations in quite low frequency range. This paper shows that the design modification of the moving part for the reconfiguration of mass moment of inertia can reduce the mode vibrations.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.4
• /
• pp.90-96
• /
• 2010

The focusing system is an important factor to determine the imaging quality of a digital imaging system. The focusing system consist of measuring the focusing index with high frequency energy of an image and controlling the movement of the focusing lens based on the computed focusing index. The computation of the focusing index is a key aspect in implementing the focusing system and the noise of the image cause the error in the sharpness evaluation of the image. To reduce this error, the noise under the low illumination condition is considered. A noise insensitive focusing index using adaptive weights is proposed in this paper. This measure determines the sharpness of an image using the spatially adaptive weights based on the local statistics of the image and noise. Experimental results under the condition without and with the noise verify the performance of the proposed method.