• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.21-27
• /
• 2007

The power line channel has time-variant characteristics caused by various kind of electrical devices. This characteristics are synchronized with the main voltage by their own characteristics. The main factors of disturbance are the variation of the channel impedance and noises. In other papers, the synchronous noise modeling has been achieved. But the modeling is not satisfied simultaneously with the time domain and the frequency domain and there are not any discussion about short-term variations of the channel impedance which cause to the signal fading. Therefore, this paper researched to solve problems about the signal fading by analyzing the short-term variation of the channel impedance, and proposed the synchronous noise modeling which is satisfied simultaneously in the time domain and the frequency domain.

• Journal of Biomedical Engineering Research
• /
• v.17 no.2
• /
• pp.155-164
• /
• 1996

In the clinical environment, measurements of some characteristics of the skeletal muscle are currently used to assess the severity of a neuromuscular disease or in some cases to assist in making a diagnosis. But a quantitative method of evaluation has not yet been introduced satisfactorily. In this paper, the skeletal EMG(biceps muscle, masseter muscle) analysis has been processed both in the time and in the frequency domain by designing the digital signal processing system based on pentium PC and transputer (IMS 7805). The experiment have been performed in five normal subjects, and various parameters have been statistically tested and compare4 As a results, the effective parameters obtained for the evaluation of skeletal EMG electrical activity are turn analysis, MiTi, MiTa, IEMG, PDF in the time domain, and are mean frequency, median frequency, skewness, kurtosis, muscle fatigue slope in the frequency domain. The designed H/W and S/W in this study can be used effectively for the establishment of EMG data base and for clinical research.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.4
• /
• pp.365-372
• /
• 1987

This paper describes the basic theory and construction of the frequency stability measurement system by beat frequency method, one kind of the accurate measurement technologies of frequency stability in time domain. The characteristics of the real system is also investigated.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.185-193
• /
• 1997

A major problem of frequency analysis in the field of low-frequencies such as building or construction vibration is the way of signal processing which is appropriate to obtain included frequency content from the finite process to be measured. Therefore, it is the aim of the investigation reported herein to develop the signal processing algorithm which is analyzed without losing the reliability of the measurements in low-frequency domain. To accomplish the research objective, it was analyzed the problems on the way of signal processing in low-frequency domain, and compared the response characteristics of FFT with those of MEM (Maximum Entropy Method) about the low-frequency of vibration. This evaluation of the response characteristics is used in determining appropriate signal processing algorithm into the low-frequency domain.

• Journal of Power Electronics
• /
• v.8 no.1
• /
• pp.91-100
• /
• 2008

The d-q harmonic detecting algorithms are dominant methods to generate current references for active power filters (APF). They are often implemented in the synchronous frame and time domain. This paper researches the frequency characteristics of d-q synchronous transformations, which are closely related to the analysis and design issues of control system. Intuitively, the synchronous transformation is explained with amplitude modulation (AM) in this paper. Then, the synchronous filter is proven to be a time-invariant and linear system, and its transfer function matrix is derived in the stationary frames. These frequency-domain models imply that the synchronous transformation has an equivalent effect of frequency transformation. It is because of this feature, the d-q method achieves band-pass characteristics with the low pass filters in the synchronous frame at run time. To simplify these analytical models, an instantaneous positive-negative sequence frame is proposed as expansion of traditional symmetrical components theory. Furthermore, the synchronous filter is compared with the traditional bind-pass filters based on these frequency-domain analytical models. The d-q harmonic detection methods are also improved to eliminate the inherent coupling effect of synchronous transformation. Typical examples are given to verify previous analysis and comparison. Simulation and experimental results are also provided for verification.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.14-15
• /
• 2000

We study the microwave characteristics of traveling-wave photodetector using the finite-difference time-domain method. We present two parameters for design, the width of PIN region and the thickness of i-layer, and analyze TWPD's property in frequency domain.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.19 no.2
• /
• pp.100-109
• /
• 1999

A method is proposed to characterize single-fiber composite interphases from the frequency-domain characteristics of scattered ultrasonic waves, and its feasibility is investigated theoretically. It has been shown that the locations and magnitudes of the peaks and valleys in the frequency domain are affected significantly by the interphase properties, which may indicate the effectiveness of the proposed method. Although the frequency-domain behavior is basically associated with the resonance of the fiber-interphase system, it is not dominantly affected by the scatterer's resonance unlike that in the case of acoustic wave scattering. Therefore, the conventional acoustic resonant scattering theory is not directly applicable to the characterization of composite interphases. In order to solve the inverse problem of predicting the interphase properties from the frequency-domain characteristics of the ultrasonic scattered waves, an artificial neural network has been constructed. This approach has demonstrated reasonable accuracy in most cases considered in this study.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.634-637
• /
• 2005

A subjective index of sound quality when it hit him is required since human listening is very sensitive and complex. Sound quality evaluation it leads consequently rightly in each situation and it composes a sound quality factor. But one of the levels in interest frequency range is substitute we cannot see the tendency of frequency substitute at whole that is executes a clear voice evaluation. Design of experiment is used and dividing 12 equally in frequency domain, the sound quality using sharpness and annoyance is performed by modifying each of frequency domains. Design of experiment method reduces much number experiment very effectively and each main effect of domain solution analysis, such as a case of sharpness and annoyance, the change of domain (increase and decrease of sound pressure level, or change nil) can grasp a type of effect should have influenced to a sound quality, and it will be able to select the objective frequency domain which hits to the sound quality. Through these obtained results the physical changes of level at arbitrary frequency domain sensitivity can be adapted.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.11
• /
• pp.25-30
• /
• 2017

In this paper, We proposed an effective demosaicking method for single chip RGB-NIR sensors to recover RGB and NIR images. As the method operates in the spatial frequency domain, the frequency domain characteristics of the sampled CFA data are investigated. Using the luminance signal in the frequency domain and the chrominance signals are processed separately with different filters. The simulated images using the real images are compared with other state-of-art methods. As a result, the proposed demosaicking method resulted an effective calculation by a single processing which the existing alternating projection method requires repeated calculation.

• Earthquakes and Structures
• /
• v.7 no.6
• /
• pp.1283-1301
• /
• 2014

Ground motion modification is extensively used in seismic design of civil infrastructure, especially where few or no recorded ground motions representative of the design scenario are available. A site in Los Angeles, California is used as a study site and 28 ground motions consistent with the design earthquake scenario are selected. The suite of 28 ground motions is scaled and modified in the time domain (TD) and frequency domain (FD) before being used as input to a bilinear SDOF system. The median structural responses to the suites of scaled, TD-modified, and FD-modified motions, along with ratios of he modified-to-scaled responses, are investigated for SDOF systems with different periods, strength ratios, and post-yield stiffness ratios. Overall, little difference (less than 20%) is observed in the peak structural accelerations, velocities, and displacements; displacement ductility; and absolute accelerations caused by the TD-modified and FD-modified motions when compared to the responses caused by the scaled motions. The energy absorbed by the system when the modified motions are used as input is more than 20% greater than when scaled motions are used as input. The observed trends in the structural response are predominantly the result of changes in the ground motion characteristics caused by modification.