• Journal of Positioning, Navigation, and Timing
• /
• 제11권4호
• /
• pp.317-325
• /
• 2022

In this paper, we developed a single frequency-based RRAIM to monitor integrity of the UAM landing vertically in urban area with only low-cost single-frequency GPS receiver. Conventional dual-frequency RRAIM eliminates ionospheric delay through a combination of frequencies. In this study, ionospheric delay was directly modeled. Drift error of residual ionospheric delay is modeled using the previously studied result on ionospheric rates of change. To verify the performance of the proposed RRAIM algorithm, a simulation of vertical landing UAM in urban area was conducted. It was assumed that the protection level at the initial position was calculated through SBAS correction data. During vertical landing, integrity monitored by receiver alone without external correction data. In the 60 sec simulation, the protection level of the proposed RRAIM compared to the conventional RRAIM was calculated to be 140% due to the accumulated ionospheric delay error. Nevertheless, it was confirmed that the final vertical protection level meeting the requirements of LPV-200, which cannot be achieved with single frequency GPS receiver alone.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1666-1668
• /
• 2004

By wireless transmission data, there is high possibility to get distortion and lose by noise and barrier on wireless. If the data check damaged and lost at receiver, can't make it clear and can't judge whether this data is right or not. Therefore, by wireless transmission data need the data error check algorithm in order to decrease the data's distortion and lose and to monitoring the transmission data as real time. This study consists of RF station for wireless transmission, Water Level Meter station for water level measurement and Error check algorithm for error check of transmission data. This study is also that investigation and search for error check algorithm in order to wireless digital data transmission in condition of the least data's damage and lose. Designed transmitter and receiver with one - chip micro process to protect to swell the volume of circuit. Had designed RF transmitter - receiver station simply by means of ATMEL one - chip micro process in the systems. Used 10mW of the best RF power and 448MHz-449MHz on frequency band which can get permission to use by Frequency Law made by Korean government

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2209-2212
• /
• 2003

In this paper, we propose the method to extract the important frequency bands from the EMG signal, and for generation of feature vector using the important frequency bands. The EMG signal is measured with 4 sensor and is recorded as 4 channel’s time series data. The same frequency bands from 4 channel’s frequency components are selected as the important frequency bands. The feature vector is calculated by the function formed using the combination of selected same important frequency bands. The EMG signals acquired from seven wrist motion type are recognized by changing into the feature vector formed. Then, the extraction and generation is performed by using the double combination of the genetic algorithm (GA) and the neural network (NN). Finally, in order to illustrate the effectiveness of the proposed method, computer simulations are done.

• Structural Engineering and Mechanics
• /
• 제49권3호
• /
• pp.411-425
• /
• 2014

This paper presents the processing of nonlinear features associated with a damage event by quadratic time-frequency distributions for damage identification in a frame structure. A time-frequency distribution is a function which distributes the total energy of a signal at a particular time and frequency point. As the occurrence of damage often gives rise to non-stationary, nonlinear structural behavior, simultaneous representation of the dynamic response in the time-frequency plane offers valuable insight for damage detection. The applicability of the bilinear time-frequency distributions of the Cohen class is examined for the damage assessment of a frame structure from the simulated acceleration data. It is shown that the changes in instantaneous energy of the dynamic response could be a good damage indicator. Presence and location of damage can be identified using Choi-Williams distribution when damping is ignored. However, in the presence of damping the Page distribution is more effective and offers better readability for structural damage detection.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.745-748
• /
• 1998

Recently, image and voice processing part is using wavelet transform. We propose thining algorithm using wavelet tranform. Wavelet transform consists of low frequency and high frequency in the spatial and frequency domain. After the wavelet decomposition, more than 90 percents of energy are contained in lowest frequency band. Therefor, for images with large difference of gray value between foreground and background like character images, we can more accurately in the lowest frequency band. Lowest frequency band has wavelet transform significant coefficient(WTS) that is required for the thinning algorithm we proposed Paper [3][5][7][8] can not separate consonants and vowels of korean characters. Becuase korean characters have structural feature. This paper can separate consonants and vowels. Simulation executed low frequency image and data compression can reduce 1/4$^{n}$ with level n. we can redcue time complexity 3/8.

• 터널과지하공간
• /
• 제15권5호
• /
• pp.352-358
• /
• 2005

콘크리트 비파괴 검사를 위하여 배면공동모형과 교량공동모형에 대하여 시간영역 탐사와 주파수영역 탐사를 실시하였다. 시간영역 탐사는 초동주시 역산법을 이용하여 토모그래피를 작성하여 공동의 여부를 해석하였다. 주파수영역 탐사는 시간영역 기록을 푸리에 변환에 의한 주파수영역에서의 최대 주파수를 분석하여 해석하였다.

• Journal of Electrical Engineering and Technology
• /
• 제1권4호
• /
• pp.534-542
• /
• 2006

This paper presents results of frequency domain spectroscopy (FDS) measurements on oil-impregnated pressboard insulation, their analyses and use of the data for modeling high frequency response (FRA) of transformers. The dielectric responses were measured in a broad frequency range, i.e. from 0.1 mHz to 1 MHz, on model samples containing different amount of moisture. The responses were parameterized with terms representing dc conductivity, low frequency dispersion and Cole-Cole polarization mechanisms and they were thereafter used to model the FRA response of a three-phase transformer.

• 한국전자파학회논문지
• /
• 제15권4호
• /
• pp.421-427
• /
• 2004

본 논문에서는 5.8 ㎓주파수 합성기에 대해 하모닉 발진을 적용하여 저가화 방안을 제안하였다. 제안한 주파수 합성기는 2.9 ㎓대역의 PLL 칩과 2.9 ㎓대역의 발진기, 그리고 5.8 ㎓대역의 버퍼 증폭기로 구성되어있다. 측정 결과는 5.65 ㎓에서 5.94 ㎓까지의 290 MHz주파수 가변범위와 약 0.5 ㏈m의 출력 전력, 그리고 100 KHz 오프셋 주파수에서 -107.67 ㏈c/Hz의 위상잡음을 보여준다. 기본 발진 전력(2.9 ㎓)을 포함한 모든 불요성분은 제안한 2차 하모닉 신호보다 적어도 15 ㏈c 이상 억압된다.

• 전자공학회논문지
• /
• 제52권7호
• /
• pp.165-168
• /
• 2015

본 논문에서는 파일럿 심볼을 이용한 안테나 선택방법을 적용한 SFBC-OFDM(Space Frequency Block Code-Orthogonal Frequency Division Multiplexing) 시스템에 대한 성능을 분석한다. 안테나 선택은 파일럿 심볼로부터 산출된 채널 계수에 기반하여 결정된다. 각 주파수에서, 산출된 채널 계수들을 정렬하고 그 중 가장 양호한 채널이 선택된 후 가장 좋은 계수를 가지는 안테나로 데이터가 전달된다. 또한 이 방법에 대해서 부호 이득과 다이버시티 이득도 분석된다.

• 감성과학
• /
• 제20권3호
• /
• pp.39-48
• /
• 2017

이 연구는 농구 경기장내 마케팅의 효용성을 확인하기 위해서 마케팅의 여러 연구 기법들 중 시선추적 기술을 이용하여 동공이 확장 되었을 때의 시선 관찰 및 관심도를 측정하고 비교 분석하였다. 특히 동공이 확장된 구간을 산출하기 위해 유효테이터를 중심으로 동공의 크기가 2시그마 범위 상위 2.275%일 때의 구간별 데이터를 정리하고 이전 연구에서 산출된 3시그마의 상위 0.135%일 때의 구간별 데이터와 전체 유효 데이터를 주시 빈도에 따른 변곡점으로 구분하여 분석하였다. 또한 전체 유효 데이터와 동공의 크기가 유의미하게 커졌다고 판단되는 범위들 간의 상관도를 분석하였다. 그 결과 가장 시선이 많이 머무른 구간과 동공이 크기가 유의미하게 커진 부분은 완전히 일치하지는 않았으나, 전체 유효 데이터와 동공크기 2시그마 상위 데이터의 상관분석은 .805로 가장 높은 상관관계를 나타내었으며, 동공크기 2시그마 상위 데이터와 동공크기 3시그마 상위 데이터의 상관분석은 .781의 상관관계를 보였고 전체 유효데이터와 동공크기 3시그마 상위 데이터 상관분석은 .683의 상관관계를 보였다. 따라서 동공의 크기가 확장 되어진 구간과 시선추적 데이터에서 시선이 많이 머무른 구간이 유사함을 알 수 있었으나, 동공의 크기가 유의미하게 확장되었다고 판단되어지는 구간의 데이터 일수록 전체 데이터와의 상관도가 떨어지는 것을 알 수 있었다.