• 전기전자학회논문지
• /
• 제20권4호
• /
• pp.385-391
• /
• 2016

We demonstrated experimentally a variable optical frequency comb source using a cascaded dual parallel Mach Zehnder modulator (DPMZM) and a phase modulator (PM). With this simple configuration and applying low drive voltages, we generated variable comb source composed of spectral lines 3, 5, 7, 9 and 11 with 10-GHz frequency spacing, also generated 2 and 3 spectral lines with 20 GHz frequency spacing. The generated comb source maintains high spectral coherence across the entire bandwidth with good spectral flatness (within 1-dB for 2, 3, 5, 7 comb lines, within 2-dB for 9-comb lines and within 3-dB for 11 comb lines). The flat and variable comb source is mainly achieved by manipulating 6 operating parameters of DPMZM, setting RF amplifier gain, connected at phase modulator and phase shifters. Hence the method is simple and offers great flexibility in achieving flat and variable comb spectrum, which is experimentally demonstrated. This brings advantages of power efficiency due to low driving voltages, simplicity and cost effectiveness to the system.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.535-538
• /
• 2002

공진기내에 음향광학소자(AOM)를 사용하여 FSF(Frequency-shifted feedback) 레이저를 수치해석 하였다. 출력 스펙트럼의 Comb 대역폭은 첨두 스펙트럼 세기에서의 순간 발진 주파수와 내부공진기 전계의 Wigner-Ville 분포로부터 유도된 순간 스펙트럼 세기의 식을 이용하여 분석한다. Comb 대역폭은 포화-확산된 대역폭과 FSF 동작에 유도되는 전체 공진 모드의 곱으로 정의된다.

• 전자통신동향분석
• /
• 제34권5호
• /
• pp.91-98
• /
• 2019

Optical frequency comb generators have been investigated as a signal source capable of generating highly stabilized ultrafast pulse lasers. The precise control of the optical frequency comb spacing by RF clock signals has led to a revolutionary paradigm shift in the precise measurement of time and frequency. Optical frequency combs also have advantages such as stable frequency spacing, stable number of lines, and robustness. Owing to these characteristics, optical frequency combs have been applied to the fields of high precision optical clock, communication, spectroscopy, waveform generation, and astronomy. In this article, we introduce the properties (i.e., generation methods, advantages, and so on) of various optical frequency combs, and discuss the expected future technological trends and applications.

• 전기전자학회논문지
• /
• 제18권1호
• /
• pp.19-24
• /
• 2014

We report stable, wideband, flat-topped, 10 GHz optical frequency comb generation from a semiconductor-based mode-locked ring laser with an intra-cavity high finesse Fabry-Perot etalon. We demonstrate a stable 10 GHz comb with greater than 200 lines within a spectral power variation below 1 dB, which is the largest value obtained from a similar mode-locked laser in our knowledge. Greater than 20 dB of the spectral peak to deep ratio at 0.02 nm resolution, ~92 femtosecond timing jitter over 1 kHz to 1 MHz range, and non-averaged time traces of pulses confirm very stable optical frequency comb lines.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권2호
• /
• pp.132-139
• /
• 2000

This paper reports a novel micromachining process based on UV-LIGA process and (110) silicon anisotropic etching for fabrication of a high-aspect-ratio comb actuator. The comb electrodes are fabricated by (110) SILICON comb structure considering the etch-rate-ratio between (110) and (111) planes and lateral etch rate of a beam-type structure. The fabricated structure was$ 400\mum \; thick\; and\; 18\mum$ wide comb electrodes separated by $7\mim$ so that the height-gap ratio was about 57. Also considering resonant frequency of the comb actuator and the frequency-matching between sensing and driving mode for gyroscope application, we designed the number, width, height and length of the spring structures. Electroplated gold springs on both sides of the seismic mass were $15\mum\; wide,\; 14\mum\; thick\; and \; 500\mum$ long. The fabricated comb actuator had resonant frequency ay 1430Hz, which was calculated to be 1441Hz. The proposed fabrication process can be applicable to the fabrication of a high-aspect-ratio comb actuator for a large displacement actuator and precision sensors. Moreover, this combined process enables to fabricate a more complex structure which cannot be fabricate only by surface or bulk micromachining.

• Journal of the Optical Society of Korea
• /
• 제11권3호
• /
• pp.124-129
• /
• 2007

For the first time we compare two kinds of optical frequency combs, one of which is based on a Ti:sapphire femtosecond laser and the other is based on a mode-locked erbium-doped fiber laser. The comparison is performed by measuring an optical frequency standard with these two combs simultaneously. The two frequency measurements agree within 1.8 Hz ($3.8{\times}10^{-15}$) with the uncertainty of 17.2 Hz ($3.6{\times}10^{-14}$), from which it can be concluded that the Ti:sapphire-based frequency comb and the fiber-based frequency comb have no systematic discrepancy at this level of uncertainty.

• 한국전자파학회논문지
• /
• 제21권4호
• /
• pp.399-407
• /
• 2010

SC-FDMA(Single Carrier-Frequency Division Multiple Access)는 DFT(Discrete Fourier Transform)-spreading 방식을 사용하여 OFDM(Orthogonal Frequency Division Multiplexing) 신호의 PAPR(Peak to Average Power Ratio) 저감하여 전력효율을 향상시키는 방식이다. 그러나, PAPR을 저감하기 위하여 블록 type 파일럿을 사용하기 때문에 이동 환경에 따른 도플러 주파수와 송수신기 사이의 주파수 불일치로 인한 주파수 옵셋과 시간 도메인에서의 위상 잡음으로 주파수 도메인에서 ICI(Inter Channel Interference)가 발생하여 SC-FDMA 시스템의 성능은 저감된다. 그러므로 이동 환경 및 위상 잡음을 제거하기 위하여 comb type 파일럿을 고려하고, 이에 대한 PAPR을 감소시키기 위하여 SLM(Selective Mapping) 기법을 사용하며, 효과적인 채널 추정 및 ICI 제거를 위한 기법을 제안한다. 그러므로 기존 블록 type에 비해 comb type을 사용함으로써 이동 수신 성능이 향상될 수 있으며 효과적으로 주파수 옵셋 및 위상 잡음을 효과적으로 제거 가능함을 보인다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 춘계종합학술대회
• /
• pp.514-517
• /
• 2002

광 공진기내에 음향광학소자(AOM)를 사용하여 FSF(Frequency-shifted feedback) 레이저를 개발하였다. 공진기는 1차 회절광에 의한 feedback loop로 구성된다. FSF 레이저 출력은 수백 PHz/s의 초고속 주파수 chirp을 갖는“chirped frequency comb”이라 불리는 주파수 출력을 보여준다. FSF 레이저를 광원으로 광거리 계측에서는 chirped 주파수 comb을 이용하여 거리를 알 수 있다.

• 한국공작기계학회논문집
• /
• 제17권6호
• /
• pp.124-131
• /
• 2008

There are many factors which affect the acoustical properties of a micro-speaker. Among the factors, the shape of the diaphragm is considered in this study. As an investigating method, the finite element methods and measurement techniques applied to study the acoustical properties according to diaphragm shape. In order to vary the stiffness of the diaphragm, the some patterns of comb teeth, such as the angle and the number of comb teeth, are applied to diaphragm. We can confirm that the change of the stiffness by the changing diaphragm shape affects the vibration and sound properties of the speaker. As a result, the reduction of the angle of the comb teeth increases the diaphragm stiffness and shifts the resonance frequency to a higher frequency range. The number of the comb teeth is related to the stiffness of the edge part.

• 전기전자학회논문지
• /
• 제19권1호
• /
• pp.27-32
• /
• 2015

A flexible and tunable microwave photonic filter based on adjustable optical frequency comb source is demonstrated. We use a combination of a dual parallel Mach Zehnder modulator and an intensity modulator to generate fifteen comb lines with proper weights to implement a desired filter. The optical comb weights, corresponding to the tap coefficients of the filter, are flexibly changed by adjusting the operation parameters of the modulators. The achieved bandwidth and stopband attenuation of the tunable filter are 0.7 GHz and 20 dB, respectively. In addition, we overcome the undesired low frequency suppression appeared in a conventional scheme by applying a dual parallel Mach Zehnder modulator for single sideband suppressed carrier modulation.