• Journal of Navigation and Port Research
• /
• v.37 no.6
• /
• pp.637-645
• /
• 2013

Masan bay with a semi-enclosed waters has serious water quality problems due to the low flow and river pollution load from land, and shows the vulnerable locational characteristics to storm surge. We are seeking the way of both operating disaster prevention facilities and water quality improvement measures in the bay. That is, the water was exchanged using the head difference occurred by operating disaster prevention facilities. The location of disaster prevention facilities was assumed to be in the inlet of the bay, in the vicinity of Machang bridge, and in the vicinity of Dot island and the operation time was assumed to be early morning hours(01~05) considering the number of shipping passage and annual tide, and spring tide of the largest head difference. In addition, the experiment case of water exchange including the in-outflow feeder pipe was tested. According to the simulation results, water exchange rate in all experiments has shown a steady increase. Water exchange rate of the whole of Masan bay in the case of present is 38.62%. The water exchange rate of the inside of Masan bay compared with the inlet of bay, appeared to be very low. Thus, we judged that the characteristics of semi-enclosed waters were well reproduced. On the results of the experiment of disaster prevention facilities and in-outflow feeder pipe, the case of the operation of disaster prevention facilities, water exchage rate is high compared with the case of present. And, the higer the operating frequency, the more water exchange is appeared. The cases of water exchange prevention facilities through the in-outflow feeder pipe caused by the head difference, also showed the higest improvement of the water quality. Compared with the south of Machang bridge, the effect of water exchange was better in the inlet of Masan bay and Dot island. On the other hand, the inlet of Masan bay is higer than Dot island as for water exchange of the whole of Masan bay, but opposite, water change rate including Masan inside was higher in the case of Dot island.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6234-6241
• /
• 2014

The purpose of this study was to examine the status of medical staff stress and accommodating manners on the death of patients in a hospital setting for serving the basic information to develop a death education program of medical personnel from April 1 to April 30, 2014. A survey was performed on 353 medical personnel at K university hospital, located in Daejeon metropolitan city. Frequency analysis, chi-square test, and independent t-test were used to analyze the data. The results showed that 'to understand the value of the time and preparedness of a meaningful future' were the most important perspectives on the contents of death education (p<0.05), 'in order to change perceptions and attitudes toward death positively' was the most important reason why they required death education'(p<0.05), 'case-based teaching and problem-based learning' was the most effective way of death education (p<0.05), 'negative or hostile response of a patient's guardian to medical personnel' was the largest stress that medical personnel confront upon witnessing a death'(p<0.05). An understanding of the death of patients by medical personnel and an awareness of the need for death education will help improve the understanding of the patient, their guardian, and medical personnel themselves. The main findings will contribute to the development of a specific death education program on the medical personnel in a hospital setting.

• Restorative Dentistry and Endodontics
• /
• v.34 no.5
• /
• pp.450-459
• /
• 2009

The aim of this study was to measure the initial dynamic modulus changes of light cured composites using a custom made rheometer. The custom made rheometer consisted of 3 parts: (1) a measurement unit of parallel plates made of glass rods, (2) an oscillating shear strain generator with a DC motor and a crank mechanism, (3) a stress measurement device using an electromagnetic torque sensor. This instrument could measure a maximum torque of 2Ncm, and the switch of the light-curing unit was synchronized with the rheometer. Six commercial composite resins [Z-100 (Z1), Z-250 (Z2), Z-350 (Z3), DenFil (DF), Tetric Ceram (TC), and Clearfil AP-X (CF)] were investigated. A dynamic oscillating shear test was undertaken with the rheometer. A certain volume ($14.2\;mm^3$) of composite was loaded between the parallel plates, which were made of glass rods (3 mm in diameter). An oscillating shear strain with a frequency of 6 Hz and amplitude of 0.00579 rad was applied to the specimen and the resultant stress was measured. Data acquisition started simultaneously with light curing, and the changes in visco-elasticity of composites were recorded for 10 seconds. The measurements were repeated 5 times for each composite at $25{\pm}0.5^{\circ}C$. Complex shear modulus G*, storage shear modulus G', loss shear modulus G" were calculated from the measured strain-stress curves. Time to reach the complex modulus G* of 10 MPa was determined. The G* and time to reach the G* of 10 MPa of composites were analyzed with One-way ANOVA and Tukey's test ($\alpha$ = 0.05). The results were as follows. 1. The custom made rheometer in this study reliably measured the initial visco-elastic modulus changes of composites during 10 seconds of light curing. 2. In all composites, the development of complex shear modulus G* had a latent period for $1{\sim}2$ seconds immediately after the start of light curing, and then increased rapidly during 10 seconds. 3. In all composites, the storage shear modulus G" increased steeper than the loss shear modulus G" during 10 seconds of light curing. 4. The complex shear modulus of Z1 was the highest, followed by CF, Z2, Z3, TC and DF the lowest. 5. Z1 was the fastest and DF was the slowest in the time to reach the complex shear modulus of 10 MPa.

• Korean Journal of Ecology and Environment
• /
• v.35 no.3 s.99
• /
• pp.160-171
• /
• 2002

The impact of summer monsoon on water quality of the lower Nakdong River was evaluated during the summer (June-August) in 1997. Several limnological variables were measured in the interval of $1{\sim}3$ day using an automatic monitoring system (Hydrolab $Recorder^{TM}$) to detect water quality changes caused by rainfall on onehour basis. During the monsoon period (from late June to mid July), 5 times of major rainfall events of >50 mm were recorded in the river basin. Dynamic changes of water quality were observed during the monsoon, and the first rainfall event (June$25{\sim}27$) had a significant influence on the water quality at the lower part of the river. All Parameters were largely changed due to the first rain event, and the changed level was maintained until the end of monsoon period. Nutrient concentrations and turbidity increased and values of the other parameters were declined as a result of water dilution. This rainfall event, Changma, is a meteorological phenomenon caused by the East-Asian monsoon climate. The magnitude and frequency of the rainfall during the early monsoon play an important role in change of water quality and ecosystem characteristics of large river systems.

• Journal of the Institute of Convergence Signal Processing
• /
• v.16 no.4
• /
• pp.149-155
• /
• 2015

Tooth implant is located in oral cavity and affects neck, skull base, and facail image. These magnetic inhomogeneities are usually frequency encoding direction which cause artifacts due to change of signal strength and geometric distortion. First, to evaluate signal to noise ratio (SNR) of magnetic resonance image caused by tooth implant this study uses meat phantom which is similar to human body and is consisted with fat, muscle, and water to measure signal to noise ratio. Second, signal to noise ratio by using custom-made fixed phantom is measured, and then signal to noise ratio size of different tooth implant types is compared and analyzed. The measured signal to noise ratio values of Brushite, HSA, Metal, and RBM for meat phantom were 2.76, 2.22, 1.88, and 1.57 on T1 SE, 1.88, 1.78, 1.65, and 1.79 on T2 FLAIR, 2.28, 2.25, 2.88, and 2.05 on T2 FSE, and 2.74, 1.94, 1.67, and 1.48 on T2 GRE. The measured signal to noise ratio values of Brushite, HSA, Metal, and RBM for fixed water phantom were 1.2, 1.06, 1.12, and 1.22 on DWI, 1.93, 1.87, 1.93, and 2.06 T1 SE, 1.83, 1.76, 1.82, and 1.92 on T2 FLAIR, 1.85, 1.79, 7.86, and 1.97 on T2 FSE, and 1.97, 1.93, 1.99, and 2.06 on T2 GRE. By considering through the results, patients and dentists need to consider some impacts from testing many aspects although their main purpose of having tooth implants is a dental restoration. Moreover, depending on the tooth implant characteristics of individual patients this study results can be used as baseline data when choosing test protocol.

• Journal of Distribution Science
• /
• v.4 no.2
• /
• pp.81-106
• /
• 2006

The value of Its visitors is very important factors on selection of a Spa & Resort. The first detailed purpose of this paper is to analyse the differences of select behaviors of a Spa & Resort according to the types of values of the visitors. The second aim is to conduct a research on the characters of select behaviors of the visitors. The third aim is to analyse the degree of satisfaction of the visitors, re-visitation and the intention of recommendation. The fourth purpose is to provide useful materials on analysis about the values of the visitors at various Spa & Resorts and to trigger dramatic effect of recuperation, relaxation with its visitor's needs met, the maximum of hotel's management profit at Spa & Resort's area and programs to activate the region's economy. Factor Analsis Routine of SPSS Windows Version 10.0 was applied to accomplish the issues of the study. The Applied analysis by research process are as follows; This paper applied Frequency analysis to figure out interviewee's demographic characters and various using types of the visitors, using their experience of visiting, Select influence, Visiting period, Accommodation they use, Accompanyist, Costs, Season, Transportation, The necessary time. This paper showed important correlation between the visitors' select attributes and behaviors after using it, between their personal value and behaviors after using it, between their individual value, motive of use and their select behavior of destinations. In accordance with it, Managers or developer of a Spa & Resort should make a plan after a sufficient review of the visitors' individual value. The visitor's value is changing continuously according to the change of spatial, occasional environment and should be assessed by those changes.

• Women's Health Nursing
• /
• v.6 no.1
• /
• pp.153-165
• /
• 2000

The antenatal self-care, one of antenatal management, was almost done by a pregnant woman herself. But It's especially difficult for primigravidas to cope with the change of being pregnant, and they also had insufficient knowledge of pregnancy, The purpose of this study was to serve as a basis for antenatal management, by grasping how much primigravidas performed antenatal self-care, how much they had maternity-related knowledge, and what factors affected those two factors. The subjects of this study were the primigravidas, selected from among visitors to a general hospital and a hospital for obstetrics and gynecology located in the city of K. A questionnaire survey was carried out over them from July 16 to August 19, 1998, to collect data. The test instrument used in this study for antenatal self-care behavior was one that modified the measurement instrument employed in studies by Kim Hae Won(1996), Lee Mi La(1984), and Yoon Young Mi(1994). Another one for maternity-related knowledge was Kim, Hae Won(1996)'s instrument. The collected data were statistically analyzed by SAS PC+. Frequency and percentage were calculated to find out the primigravidas' general characteristics, and the mean and standard deviation, rank were estimated to determine the degrees of antenatal self-care behavior and maternity-related knowledge, t-test and ANOVA were carried out to identify the general characteristic that affected antenatal self-care and maternity-related knowledge. and the relationship of antenatal self-care behavior to maternity-related knowledge was tested by Pearson correlation coefficient. The findings of this study were as follows; First, the age of the subjects ranged from 18 to 37, and their mean age was 26.43. Their mean gestational period was 24.87 weeks. 45% of the subjects were in the third-term pregnancy. Second, their total mean score in antenatal self-care behavior ranged from 94, the highest, to 36, the lowest. Its average score was 63.81(SD 9.98). The total mean score in maternity-related knowledge ranged from 20, the highest, to 1, the lowest, and its average score was 10.91(SD 4.59, 54.55 percent). Third, the general characteristics that gave impact on the primigravidas' antenatal self-care behavior were age, educational background, gestational period, experience of natural miscarriage, and experience of infertility test. A higher score in antenatal self-care behavior was gained by the primigravida group who had better educational background(F=3.29, p=.02), who was in the late stage of pregnancy(F=4.31, p=.01), who experienced a natural miscarriage(t=2.06, p=.04), and who went through a infertility test(t=-2.19, p=.04). Fourth, the general characteristics that had an influence on maternity-related knowledge were identified as the religion, the term of marriage, and the gestational period. A higher score in maternity-related knowledge was got by the primigravida group who had a religion(t=-2.02, p=.04), and who was in the late stage of pregnancy(F=5.77, p=.003). The term of marriage also made a significant difference(F=3.46, p=.02). Fifth, the relationship of the total mean score between antenatal self-care behavior and maternity-related knowledge was found to be at r=.37(p=.0001). In this study, an attempt was made to affirm the subjects' characteristics, the degree of their antenatal self-care behavior, and the extent of their maternity-related knowledge, to confirm what characteristics affected significantly primigravida's antenatal self-care behavior and maternity-related knowledge, and to verify that there was a relationship between the two variables. The meaning of this study might be backed up by the fact that its findings would serve as a basis for primigravida's efficient antenatal management in the future.

• Geophysics and Geophysical Exploration
• /
• v.1 no.1
• /
• pp.25-30
• /
• 1998

Time-lapse crosswell seismic data, recorded before and after the cavity filling, showed that the filling increased the velocity at a known cavity zone in an old mine site in Inchon area. The seismic response depicted on the tomogram and in conjunction with the geologic data from drillings imply that the size of the cavity may be either small or filled by debris. In this study, I attempted to evaluate the filling effect by analyzing velocity measured from the time-lapse tomograms. The data acquired by a downhole airgun and 24-channel hydrophone system revealed that there exists measurable amounts of source statics. I presented a methodology to estimate the source statics. The procedure for this method is: 1) examine the source firing-time for each source, and remove the effect of irregular firing time, and 2) estimate the residual statics caused by inaccurate source positioning. This proposed multi-step inversion may reduce high frequency numerical noise and enhance the resolution at the zone of interest. The multi-step inversion with different starting models successfully shows the subtle velocity changes at the small cavity zone. The inversion procedure is: 1) conduct an inversion using regular sized cells, and generate an image of gross velocity structure by applying a 2-D median filter on the resulting tomogram, and 2) construct the starting velocity model by modifying the final velocity model from the first phase. The model was modified so that the zone of interest consists of small-sized grids. The final velocity model developed from the baseline survey was as a starting velocity model on the monitor inversion. Since we expected a velocity change only in the cavity zone, in the monitor inversion, we can significantly reduce the number of model parameters by fixing the model out-side the cavity zone equal to the baseline model.

• Journal of The Korean Association For Science Education
• /
• v.41 no.6
• /
• pp.455-470
• /
• 2021

This study examines the trend changes in keywords and topics of STEAM education from 2009 to 2020 to derive future development direction and education implications. Among the collected data, 42 cases of Ministry of Education's documents, 1,534 cases of articles, and 880 cases of abstract of researches were selected as research subjects. Keyword analysis, keyword network and topic modeling were performed for each stage of STEAM education policy through the Python program. As a result of the analysis, according to the STEAM education policy stage, there were differences in the frequency and network of keywords related to STEAM education by media. It was confirmed that there was a difference in interest in STEAM education policy as there were differences in keywords and topics that were mainly used importantly by media. Most of the topics of the Ministry of Education's documents were found to correspond to topics derived from articles. The implications for the development direction of STEAM education derived from the results of this study are as follows: first, STEAM education needs to consider ways to connect multiple topics, including the humanities. Second, since the media has a difference in interest in STEAM education policy, it is necessary to seek a cooperative development direction through understanding this. Third, the Ministry of Education's support for core competency reinforcement and convergence literacy for nurturing future talents, the goal of STEAM education, and the media's efforts to increase the public's understanding of STEAM education are required. Lastly, it is necessary to continuously analyze the themes that will appear in the evaluation process and change STEAM education policy.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_2
• /
• pp.1329-1340
• /
• 2021

The intertidal zone, which is a transitional zone between the ocean and the land, requires continuous monitoring as various changes occur rapidly due to artificial activity and natural disturbance. Monitoring of coastal topography changes using remote sensing method is evaluated to be effective in overcoming the limitations of intertidal zone accessibility and observing long-term topographic changes in intertidal zone. Most of the existing coastal topographic monitoring studies using remote sensing were conducted through high spatial resolution images such as Landsat and Sentinel. This study extracted the waterline using the NDWI from the GOCI-II (Geostationary Ocean Color Satellite-II) data, identified the changes in the intertidal area in Gyeonggi Bay according to various tidal heights, and examined the utility of DEM generation and topography altitude change observation over a short period of time. GOCI-II (249 scenes), Sentinel-2A/B (39 scenes), Landsat 8 OLI (7 scenes) images were obtained around Gyeonggi Bay from October 8, 2020 to August 16, 2021. If generating intertidal area DEM, Sentinel and Landsat images required at least 3 months to 1 year of data collection, but the GOCI-II satellite was able to generate intertidal area DEM in Gyeonggi Bay using only one day of data according to tidal heights, and the topography altitude was also observed through exposure frequency. When observing coastal topography changes using the GOCI-II satellite, it would be a good idea to detect topography changes early through a short cycle and to accurately interpolate and utilize insufficient spatial resolutions using multi-remote sensing data of high resolution. Based on the above results, it is expected that it will be possible to quickly provide information necessary for the latest topographic map and coastal management of the Korean Peninsula by expanding the research area and developing technologies that can be automatically analyzed and detected.