• Journal of IKEEE
• /
• v.16 no.2
• /
• pp.69-75
• /
• 2012

In this paper, microstrip array antenna is proposed for the wireless communication of DSRC(dedicated short range communication) scheme at 5.8GHz, which works as a part of the Navigation terminal. The microstrip patches minimized from a rectangular microstrip antenna with a half wavelength are arrayed to be mounted on the narrow and long area in the top side of the navigation terminal. Besides, the array antenna can limit its own beamwidth to the driving lane and has better directivity. It is simulated to verify the validity of the proposed application. The prototype fabricated has a volume of $18{\times}40{\times}0.8mm^3$. From the measurement, it has circular polarization performance of 4dB axial ratio over 40MHz frequency band. In addition, antenna gain of 6.2dBi and 3dB beamwidth of $70^{\circ}$ at cross section of driving lane have been achieved.

• Journal of IKEEE
• /
• v.21 no.3
• /
• pp.248-251
• /
• 2017

In this paper, The proposed board is developed by EMI compliant Dash Camera with $360^{\circ}$ omni angle. The proposed board is designed by designing DM and CM input noise reduction circuit and applying active EMI filter coupling circuit. The DM and CM input noise reduction circuit design uses a differential op amp circuit to obtain the DM noise coupled to the input signal via the parasitic capacitance(CP). In order to simplify the circuit by applying the active EMI filter coupling circuit, a noise separator is installed to compensate the noise of the EMI source to compensate the CM and DM active filter simultaneously. In order to evaluate the performance of the board for the proposed EMI response, an authorized accreditation body has confirmed that the electromagnetic certification standard for each frequency band is satisfied.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.105-113
• /
• 2009

In this paper, a vehicle antenna for AM, FM, TDMB, GPS systems was designed and implemented. AM antenna loaded into small space of shark shape was designed by ferrite turn style antenna. For the FM and TDMB antenna, folded monopole antenna which helical is folded was applied. GPS antenna for achieving characteristics both bandwidth and gain improvement was designed microstrip patch that has air substrate and fractal structure. Receiving signal strengths by the measurement were presented for the AM, FM and TDMB antenna. AM signal strength was -65.7dBm, this strength is almost as same conventional pole antenna as -63.4dBm. It can be replaced conventional pole or glass antenna by the studied antenna. Signal strengths for FM and TDMB were -55.66 and -43.50dBm at center frequency, they are 5~10dB higher than conventional antenna. Measurements of bandwidth and gain for the GPS antenna showed 135 MHz under VSWR 2 : 1 and 4.31dBi, gains over GPS band were 3~5dB higher than ceramic patch antenna.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.1-8
• /
• 2011

In this paper, a microstrip bandpass filter(BPF) with 3 dB bandwidth of more than 50 % at center frequency of 30 GHz was implemented. The implemented BPF is to be used as ASK(Amplitude Shift Keying) transmission and reception filters in IF band for THz transmitter and receiver capable of 10 Gb/s wireless data transmission. The microstrip BPF with ultra-wideband characteristics was implemented using a stepped-impedance lowpass filter(LPF) and a composite quarter-wave short stubs where the LPF is functioning as attenuating the upper stopband and quarter-wave short stubs is functioning as attenuating the lower stopband. The measured results are as follows; the insertion loss is 0.65 dB at 30 GHz, the stopband characteristics are -10 dB and -16 dB at 10 GHz and 50 GHz, respectively, and the passband flatness is ${\pm}0.5$ dB at 20~40 GHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.8
• /
• pp.580-587
• /
• 2003

In this paper, we introduce a novel model to analyze the linearity of a TW-EAM (traveling-wave electroabsorption modulator). The device length, microwave loss (ML), and internal reflection (IR) due to impedance mismatch have effect on the linearity of a TW-EAM. The longer devices have characteristics of lower biases with minimum IMDS (intermodulation distortions). ML decreases the output power as well as the IMD value. Internal reflection has different nonlinear characteristics according to the wavelength of the input frequency and the device length. There is little change in SFDR (spurious-free dynamic range) due to ML or IR. As a result, for a 50 GHz band RF-optical communication system, a 0.8 mm-long TW-EAM with the lowest ML would have better properties by using n, which is caused by impedance, mismatch at the output port.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.8
• /
• pp.37-44
• /
• 2004

This paper describes a new GaAs-based surface-micromachined microstrip line supported by dielectric post and air-gapped signal line with ground metal. This new type of dielectric-supported air-gapped microstripline(DAML) structure is developed using surface micromachining techniques to provide easy means of airbridge connection between the signal lines and to archive low losses at millimeter-wave frequency band with wide impedance range. Each DAMLs with the length of 5 mm are fabricated and the measured characteristics are compared with those of the conventional microstrip transmission line. These transmission lines are composed of 10 ${\mu}{\textrm}{m}$ height of signal line, post size of 10 ${\mu}{\textrm}{m}$ ${\times}$ 10 ${\mu}{\textrm}{m}$ and post height of 9 ${\mu}{\textrm}{m}$. By elevating the signal lines from the substrate using the micromachining technology, the substrate dielectric loss can be reduced Compared with of the conventional microstrip transmission line showing 7.5 dB/cm loss at 50 GHz, the loss can be reduced to 1.1 dB/cm loss at 50 GHz.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.05a
• /
• pp.28.1-28.1
• /
• 2009

The superior properties of ZnO such as high exciton binding energy, high thermal and chemical stability, low growth temperature and possibility of wet etching process in ZnO have great interest for applications ranging from optoelectronics to chemical sensor. Particularly, vertically well-aligned ZnO nanorods on large areas with good optical and structural properties are of special interest for the fabrication of electronic and optical nanodevices. Currently, low-dimensional ZnO is synthesized by metal-organic chemical vapor deposition (MOCVD), molecular beam epitaxy (MBE), thermal evaporation, and sol.gel growth. Recently, our group has been reported about achievement the growth of Ga-doped ZnO nanorods using ZnO seed layer on p-type Si substrate by RF magnetron sputtering system at high rf power and high growth temperature. However, the crystallinity of nanorods deteriorates due to lattice mismatch between nanorods and Si substrate. Also, in the growth of oxide using sputtering, the oxygen flow ratio relative to argon gas flow is an important growth parameter and significantly affects the structural properties. In this study, Phosphorus (P) doped ZnO nanorods were grown on c-sapphire substrates without seed layer by radio frequency magnetron sputtering with various argon/oxygen gas ratios. The layer change films into nanorods with decreasing oxygen partial pressure. The diameter and length of vertically well-aligned on the c-sapphire substrate are in the range of 51-103 nm and about 725 nm, respectively. The photoluminescence spectra of the nanorods are dominated by intense near band-edge emission with weak deep-level emission.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1991.06a
• /
• pp.14-14
• /
• 1991

후두의 생리적 기능은 하기도를 보호하는 방어기능과 호흡기능 그리고 발성기능으로 대별할 수 있는데 이 가운데 계통발생적으로 가장 원시적이지만 중요한 기능은 하기도 방어기능으로 이는 다른 기능과 달리 전적으로 불수의적이고 반사적으로 이루어진다. 이 기능은 후두내 점막에 존재하는 촉각 수용체(tactile receptor)가 자극되면서 후두근육이 수축 반사를 일으켜 성문이 닫히는 성문폐쇄반사(glottic closure reflex)로서 다접합뇌간반사(polysynaptic brain stem response)이다. 현재까지 후두의 신경장애에서 그 부위나 정도 또는 신경재생 상태 등을 검사하는 방법으로 근전도검사가 주로 쓰여져 왔으나 그것이 주는 정보가 극히 제한되어 있다. 그러나 최근 청각뇌간유발반응과 같이 후두뇌간유발반응 이라 명명된 wave가 존재한다는 사실이 밝혀져 이에 대한 연구가 이루어지고 있어 이것이 임상에 쓰여질 수 있다면 현재 성문폐쇄반사의 소실이나 이상이 원인으로 사료되는 idiopathic laryngospasm, gastroesophageal reflux, spastic dysphonia, stuttering, sudden infant death syndrome과 같은 질환의 진단과 치료에 커다란 진전이 있을 것이다. 이에 저자들은 고양이 6마리를 이용하여 상후두신경을 전기적으로 자극하여 유발되는 반응을 far field recording을 이용 평균 가산법으로 그 wave를 측정하여 다음과 같은 결과를 얻었다. 1. 상후두신경자극(2㎃, stimuli frequency 3/s, Band filter 320-1000, 0.2 ㎳ duration)에 의한 반회신경에의 유발 반응을 기록하였고 그 잠복시간은 평균 8.2 ㎳ 였다. 2. 상후두신경을 자극하여 후두뇌간유발반응을 기록하였고 후두뇌간유발반응은 4개의 양 wave와 4개의 음 wave로 구성되었다. 3. 각 wave의 평균 잠복시간은 P1은 0.8㎳, P2는 2.3㎳, P3는 3.6㎳, P4는 4.3㎳였고 N1은 1.5㎳, N2 은 2.7㎳, N3는 3.9㎳, N4는 5.5㎳ 였다.

• Journal of Magnetics
• /
• v.7 no.2
• /
• pp.29-39
• /
• 2002

The initial NiCuZn synthetic ferrite were acquired from thermally decomposing the metal nitrates $Fe(NO_3)_39H_2O, Zn(NO_3)_26H_2O, Ni(NO_3)_26H_2O, and Cu(NO_3)_23H_2O$ at $150^circ{C}$ for 24 hours, and then we calcined the synthetic powder at $500^circ{C}$, pulverized each of those for 3, 6, 9, 12, and 15 hours in a steel ball mill, sintered each at $700^circ{C}$ to $1,000^circ{C}$ for 1 hour, and thus studied their microstructures and electromagnetic properties. We could make the initial specimens chemically bonded in liquidity at a low-temperature $150^circ{C}$, by using the low melting points less than $200^circ{C}$ of the metal nitrates instead of the mechanical ball-mill pulverization, then narrow a distance between the particles into a molecular one, and thus lower the reaction point of sintering by at least $200^circ{C}$ to $300^circ{C}$. Their initial permeability was 50 to 400 and their maximum magnetic induction density and coercive force, 2,400 G and 0.3 Oe to 0.5 Oe respectively, which was similar to those of NiZnCu ferrite synthesized in the conventional process. In the graph of initial permeability by frequencies, a $180^circ{C}$ rotation of the magnetic domains which appears in a broad band of micro-wave before and after the resonance frequency, could be perceived.

• Journal of the Korean Vacuum Society
• /
• v.19 no.4
• /
• pp.287-292
• /
• 2010

We have investigated the effects of oxygen flow ratios on the structural, morphological, and optical properties of AlN thin films grown by using radio-frequency reactive magnetron sputtering. The AlN thin films were deposited at $300^{\circ}C$ of substrate temperature, and the reactive gas were supplied with both nitrogen and oxygen. The oxygen flow ratio was varied by controlling the amount of oxygen with respect to the total mixed gases, 0%, 10%, 15%, 20%, 25%, and 30%. The structural, morphological, and optical properties of the deposited AlN thin films were examined by using X-ray diffractometer, scanning electron microscopy, and ultraviolet-visible spectrophotometer. The AlN thin film grown at 10% of oxygen flow ratio indicated an average transmittance of 91.3% in the wavelength range of 350~1,100 nm and an optical band gap of 4.30 eV. The experimental results suggest that AlN thin films can be deposited optionally by varying the oxygen flow ratio.