• 제목/요약/키워드: frequency and correlation analysis

검색결과 2,822건 처리시간 0.037초

중국의 회색지대전략 메커니즘 분석을 통한 남중국해 및 동중국해 분쟁 양상 비교: 시계열 데이터에 근거한 경험적 연구를 중심으로 (Comparison on Patterns of Conflicts in the South China Sea and the East China Sea through Analysis on Mechanism of Chinese Gray Zone Strategy)

  • 조용수
    • 해양안보
    • /
    • 제1권1호
    • /
    • pp.273-310
    • /
    • 2020
  • 본 연구는 최근 남중국해와 동중국해를 둘러싼 해양 갈등에서 중국의 주요 해양안보전략 중 하나로 사용되기 시작한 "회색지대전략"의 전반적인 메커니즘을 경험적으로 분석하고, 그로 인한 남중국해 및 동중국해 분쟁 양상을 비교하는 데에 그 목적을 둔다. 이를 위해 필자는 중국의 회색지대전략에 관한 두 가지 가설들을 세워 남중국해와 동중국해 분쟁에서 중국의 회색지대전략이 어떻게 '구사'되어 왔고 '구성'되어 있는지, 상대국은 어떤 방식으로 그것에 대응하는지 살펴보고, 그로 말미암아 각 분쟁들의 양상은 어떤 유사점과 차이점을 보이는지 밝혀냈다. 필자가 이 연구에서 수립한 가설들은 첫 째, "중국이 활용하는 해양 회색지대전략은 주요 분쟁 지역인 남중국해와 동중국해에서 각기 다른 수행 구조를 보인다는 것"이다. 두 번째는, "이에 따라 남중국해와 동중국해에서 벌어지는 분쟁의 양상 역시 차이를 보인다는 것"이다. 이를 논증하기 위해 필자는 중국의 회색지대전략 메커니즘을 크게 차례대로 1) 분쟁 추이와 전략 수행의 빈도, 2) 전략의 유형과 강도, 3) 전략 수행의 행위자, 4) 상대국의 대응 방식으로 다차원적인 구분을 시도하고, 양적 모델링을 바탕으로 이에 관련 데이터를 수집했다. 이후, 2010년부터 2020년 06월에 이르는 약 10년 가량의 데이터(중국의 회색지대전략 사용과 분쟁 동향 등)를 가공하고, 직접 연구 모형을 설계해 회색지대전략에 대한 새로운 범주화와 조작적 정의를 시도했다. 이를 바탕으로 필자는 중국이 활용하는 회색지대전략의 포괄적인 메커니즘들과 남중국해와 동중국해의 분쟁 양상도 성공적으로 비교해 최종적으로 모든 가설을 검증할 수 있었다. 결론 부분에서는 검증된 결과를 재차 정리하고, 중국의 회색지대전략으로 인해 비롯될 수 있는 동아시아 역내의 안보 취약성을 극복해 나가야 함을 강조하는 것으로 마무리했다. 본 연구는 지금까지 한 번도 시도되지 않았던 연구로서 중국의 회색지대전략이 수행되는 구조를 밝히고, 이것과 해양 분쟁 양상 간의 상관관계를 양적 방법론을 이용해 규명했다는 데에 큰 의의가 있으리라 생각된다.

  • PDF

주요우울장애 환자에서의 심박변이도와 혈중 지질 농도와의 연관성 (Heart Rate Variability and Lipid Profile in Patients with Major Depressive Disorder)

  • 안은정;최진숙;장용이;이해우;심현보
    • 수면정신생리
    • /
    • 제19권1호
    • /
    • pp.27-34
    • /
    • 2012
  • 목 적 : HRV 검사는 교감 신경과 부교감 신경의 억제 체제에 의해 조절되는 심박변이도를 측정하고 분석하는 도구로서, 현재 민감하고 비침습적인 도구로 인정받고 있다. 우울증 환자들은 불안, 우울과 같은 정신적 스트레스를 지속적으로 받으면서 자율신경계 억제 기전의 교란을 받게 된다. 우울증은 또 심혈관 질환의 이환과 사망률을 예측하는 독립적 예측인자라고 보고되고 있다. 본 연구에서는 HRV 검사를 통하여 정상인과 우울증 환자 사이에서 HRV와 lipid level 사이의 상관관계를 알아보려고 하였다. 방 법 : 2011년 7월부터 2012년 3월까지 서울의료원 정신건강의학과 우울증 클리닉에 내원한 외래 및 입원 환자 중, 만 19세 이상 65세 이하 환자(42명)를 대상으로 하였고, 환자들과 나이, 성별을 일치시킨 병원에서 근무하는 직원 중 정신과 과거력과 신체 질환이 없는 사람(32명)을 대상으로, HRV, 혈중 지질 농도, HAM-A(hamilton anxiety scale), HAM-D(hamilton depression scale)를 조사하였다. 우울증 환자군과 정상대조군을 독립표본 t-검정 및 카이제곱-검정을 시행하여 비교하였다. Pearson 상관 분석을 이용하여 우울 증상의 심각도, HRV 세부지표, 혈중 지질 농도 간의 상관관계를 살펴보았다(p<0.05). 결 과 : 우울증 환자군과 정상대조군 사이에 인구학적 변인은 차이가 없었으며, 우울증 환자군에게서 HAM-D & HAM-A 점수가 높았다. 혈중 지질 농도 검사에서, 우울증 환자군이 정상군보다 cholesterol, TG, LDL 수치가 유의하게 높게 측정되었다. HRV 시간영역 분석(time domain analyses)에서, 우울증 환자군이 정상군보다 SDNN이 낮게 나왔으나 유의한 차이는 보이지 않았다. 한편, ApEn(approximate entrophy)이 정상군보다 우울증 환자군에서 유의하게 높았으며, ApEn은 LDL, HAM-D, HAM-A와 유의한 상관관계를 보였다. 결 론 : 우울증 환자군의 HRV에서 ApEn이 정상대조군보다 높게 측정되었다. ApEn은 최근에 개발된 비선형적 분석으로 HRV 신호가 얼마나 복잡한 지를 통계적으로 정량화한 수치이며, 데이터 양이 적고, 잡음이 많은 생리학적 데이터를 분석하기에 적합하다고 알려져 있다. 본 연구에서는 ApEn이 우울증 환자군에서 유의하게 높게 나왔으며, ApEn이 LDL, HAM-D, HAM-A와도 상관관계를 갖는 것으로 나타났다. 향후, HRV를 임상적 상황에서 실용적으로 사용하는 연구에 있어, ApEn을 새로운 평가 도구로서 주목할 필요가 있겠다.

강우량 및 호우피해 자료를 이용한 호우피해 등급기준 Matrix작성 기법 개발 (Development of a method to create a matrix of heavy rain damage rating standards using rainfall and heavy rain damage data)

  • 정세진;유재은;허다솜;정승권
    • 한국수자원학회논문집
    • /
    • 제56권2호
    • /
    • pp.115-124
    • /
    • 2023
  • 현재 극한기상의 발생빈도가 많아지면서 극한기상현상이 발생하였을 때 피해규모는 증가하고 있다. 이게 과거부터 강우량의 예측을 위해 많은 시간과 제원을 투자하여 예측정보를 제공하고 있다. 하지만 이러한 정보는 전문가가 아닌 일반인이 이해하기 어려우며 특히 극한기상현상이 발생하였을 때 어느정도의 규모의 피해가 발생하는지에 대한 정보는 포함되어 있지 않다. 이에 본 연구에서는 영국에서 최초로 제시한 Risk Matrix 작성을 통해 영향예보 기준을 활용하여 호우피해 등급기준 Risk Matrix를 제시하였다. 먼저 강우량 자료와 피해자료와의 상관 분석을 통해 Risk Matrix 작성에 필요한 변수를 선정하고 선행연구에서 제시된 PERCENTILE (25%, 75%, 90%, 95%)과 JNBC(Jenks Natural Breaks Classification)기법을 이용하여 강우량과 피해에 따른 등급기준을 산정하여 두 개의 등급기준을 합성하여 하나의 기준을 제시하였다. 분석 결과에 이재민 세대수 결과의 경우 가장 많은 피해가 발생하였던 영산강, 섬진강유역에서 JNBC 보다 PERCENTILE이 가장 많은 분포를 보였으며, 충청도 지역에서는 유사한 결과를 나타내었다. 강우량의 등급화 결과를 살펴보면 PERCENTILE보다 JNBC의 등급이 높게 산정되었으며, 특히 전라도 지역과 충청도 지역에서 가장 큰 등급을 나타내었다. 또한 피해지역 호우특보 현황과 비교해 보면 JNBC가 유사한 것을 확인할 수 있다. Risk Matrix 결과에서 가장 피해가 심했던 세종, 대전, 충남, 충북, 광주, 전남, 전북지역을 살펴보면 PERCENTILE보다 JNBC가 잘 모사한 것을 확인하였다.

베타 3-아드레날린 수용체의 유전자형이 고혈당증 유발에 미치는 영향 (Effects of β3-Adrenergic Receptor Polymorphism on the Hyperglycemia in Korean Subjects)

  • 오현희;최선미;양현성;김길수;윤유식
    • 한국식품영양과학회지
    • /
    • 제33권1호
    • /
    • pp.83-90
    • /
    • 2004
  • 한국인 남녀 530명을 대상으로 $\beta$3-AR의 유전자 다형성이 비만과 혈당의 증가에 미치는 영향을 연구한 결과 연구대상자들의 평균 연령은 26.55$\pm$0.31세이었고, 남성이 9.1%,여성이 90.9%이었다. $\beta$3-AR의 유전자 다형성의 분포는 WW형 0.75, WR형 0.22, RR형 0.03이었고, BMI 25 kg/$m^2$를 기준으로 하여 정상군에서 WW, WR, RR형의 빈도수는 각각0.75, 0.23, 0.02이었고, 비만군에서는 각각 0.76, 0.21, 0.03이었다. 유전자 다형성에 따라 혈당은 WR+RR형에서 WW형에 비해 유의적으로 증가하였다(p=0.001). 혈당 6.105 mmol/L을 기준으로 $\beta$3-AR의 유전자 다형성의 빈도수를 분석한 결과 WR+RR형의 빈도수가 고혈당군에서는 35.6%이었고 정상혈당군에서는 23.3%으로 변이형의 빈도가 고혈당군에서 유의적으로 높았다(p=0.011). 혈당에 따라 비만도와 체지방율은 고혈당군에서 유의적으로 증가하였다(p=0.044, 0.046). HDL 콜레스테롤은 정상혈당군에서 유의적으로 증가하였고(p=0.006), 중성지방은 고혈당군에서 유의적으로 증가하였다(p=0.000). 혈당의 증가에 가장 영향을 미치는 지표를 분석하기 위해 다단계 로지스틱 회귀분석한 결과 중성지방(p=0.000), 혈중 알부민(p=0.008), $\beta$3-AR의 유전자 다형성 (p=0.011), HDL 콜레스테롤(p=0.059) 순으로 나타났다. 특히 중성지방의 증가와 $\beta$3-AR의 유전자의 WR+RR형은 고혈당의 유발 위험율을 각각 2.165배, 2.015배 증가시키고, HDL 콜레스테롤의 증가는 위험율을 0.491배 감소시키는 결과를 보인다. 각각의 유전자다형성 군에서 혈당과 BMI, WHR, 체지방량의 상관성을 분석한 결과에서 정상군에서는 비만의 판정지표인 BMI, WHR, 체지방량과 혈당이 유의적인 정의 상관관계를 나타내었으나 변이형인 WR, RR형에서는 이들 변수간에 상관성이 보이지 않았다 결과적으로 $\beta$3-AR 유전자의 변이형에서 혈당은 증가하였고, 고혈당에서는 체지방 및 중성지방이 증가하였고, HDL 콜레스테롤은 감소하였다. 또한 고혈당과 변이형의 빈도는 유의적인 상관성을 나타내었다. 따라서 $\beta$3-AR 유전자의 변이형은 혈당과 혈중 지질의 조성변화에 영향을 미치며 이는 고혈당의 위험성을 예견할 수 있는 독립적인 지표로 나타났다.

노인복지시설 종사자의 감정노동으로 인한 직무스트레스가 조직몰입에 미치는 영향 (The effect of job stress on organizational commitment for senior welfare facility staffs suffering from emotional labor)

  • 조종현
    • 벤처혁신연구
    • /
    • 제1권1호
    • /
    • pp.129-143
    • /
    • 2018
  • 노인복지시설에 근무하는 종사자는 어르신 및 가족 등과 직접으로 상담하는 경우 수평적인 관계가 아닌 나이로 인한 수직적 관계로 소수지만 이용 어르신 및 가족 등이 폭언, 폭행 및 비합리적 민원 욕구 등으로 종사자에게 정신적, 신체적 고통을 주고 있는 것이 현실이다. 특히 우리나라는 예로부터 경로효친 사상이 강조되고 있는 사회인 관계로 어르신을 위하여 대부분 무조건적으로 해결해야 하는 경우가 있다. 그러나 민원 중심이 과중되고 해결을 할 수 없는 자기중심적 민원 등으로 종사자는 어려움을 호소하고 있는 현실이다. 2018년 5월초부터 노인복지시설을 포함한 사회복지시설 종사자들 위한 '사회복지서비스 등 폭력위험에 노출된 직업군을 보호하는 대책이 마련되어야 합니다'라는 주제로 청와대에 국민청원이 진행되어 지고 있는 현실이다. 이번 논문을 통하여 노인복지시설 종사자가 감정노동으로 인한 직무스트레스 및 조직몰입에 대한 연구를 통하여 노인복지시설 종사자의 어려움을 제기, 노인복지시설 이용자로서 권리와 노인복지시설 종사자의 권리가 상충되는 것이 아니라 상생하는 방안이 필요하다. 연구 방법은 서울, 경기도에 소재하고 있는 노인복지시설 종사자 178명을 대상으로부터 구조화된 설문지를 사용하여 수집하였다. 수집된 자료는 IBM SPSS Statistics 24.0 프로그램을 이용하여 표본의 일반적 특성, 신뢰도, 및 타당성 분석, 상관관계 분석, 연구가설의 검증을 근거로 다음과 같은 결과를 도출하였다. 첫째, 노인복지시설 종사자의 감정표현빈도가 직무스트레스에 부(-)의 영향을 미치는 것으로 나타났다. 둘째, 노인복지시설 종사자의 감정부조화가 직무스트레스에 부(-)의 영향을 미치는 것으로 나타났다. 셋째, 노인복지시설 종사자의 감정부조화가 직무몰입에 부(-)의 영향을 미치는 것으로 나타났다. 넷째, 직무스트레스가 노인복지시설 종사자의 감정노동 요인과 조직몰입간의 매개효과가 있는 것으로 나타났다.

강원지역 초등학생들의 급식유형(도시형, 농어촌형 및 도서벽지형) 별식행동과 식이자기효능감 및 영양지식과의 관계 (Relationships between Eating Behavior, Dietary Self-Efficacy, and Nutrition Knowledge of Elementary School Students by Food Service Type in Gangwon Province)

  • 원향례;신기쁨
    • 한국식품영양과학회지
    • /
    • 제41권5호
    • /
    • pp.638-646
    • /
    • 2012
  • 본 연구는 급식유형이 다른 초등학생들의 식행동 및 식이자기효능감과 영양지식과의 관계를 규명하여 급식유형에 따라 아동들의 바람직한 식행동을 형성하기 위한 영양교육자료를 얻기 위하여 수행되었다. 본 연구의 주요 결과는 다음과 같이 요약할 수 있다. 급식유형에 따라 차이를 보인 일반적 특성은 부모의 교육정도, 부모의 직업, 출생순위, 형제 수, 월 소득으로 나타났다. 급식유형에 따른 식행동 평균 점수는 도시형, 농어촌형, 도서벽지형 순으로 높게 나타났으나 통계적으로 유의적 차이는 보이지 않았으나 세부 문항별 점수 중 식사 시 영양지식의 활용 여부와 외식 빈도를 묻는 문항은 도시형, 농어촌형, 도서벽지형 순으로 유의성 있게 높게 나타났다. 급식유형에 따른 식이자기효능감 평균점수는 도시형, 농어촌형, 도서벽지형 순으로 높게 나타났으나 통계적으로 급식유형에 따른 유의적 차이를 보이지는 않았다. 식이자기효능감 4개 영역의 전체 점수는 감정적 상태 영역, 음식의 선택 영역, 일반적 습관 영역, 사회적 환경 영역순으로 높게 나타났다. 급식유형에 따른 세부 문항 중 유의적 차이를 나타낸 문항은 일반적인 습관 영역에서 친구들과 속도를 맞추어 천천히 식사할 수 있는지에 대한 문항과 음식의 선택 영역에서는 튀기거나 부친음식 대신 굽거나 찐 음식의 선택에 대한 문항이 농어촌형>도시형>도서벽지형의 순으로 유의적으로 높았다. 사회적 환경 영역은 친구 생일잔치나 명절날 음식의 절제 대한 문항(도시형>농어촌형>도서벽 지형)과 감정적 상태 영역에서는 우울할 때 음식물의 절제에 대한 문항(도서벽지형>도시형>농어촌형)에서 유의적 차이를 나타내었다. 급식유형에 따른 영양지식의 평균점수는 농어촌형, 도시형, 도서벽지형 순으로 높게 나타났으나 통계적으로 유의적 차이는 보이지 않았다. 급식유형에 따른 세부 문항 중 잠자기 전 간식 섭취와 체중증가의 관계를 묻는 문항(도시형 $0.90{\pm}0.31$, 농어촌형 $0.90{\pm}0.31$, 도서벽지형 $0.80{\pm}0.40$)과 비슷한 크기의 식품 간의 열량 비교 문항(농어촌형 $0.72{\pm}0.45$, 도시형 $0.71{\pm}0.45$, 도서벽지형 $0.57{\pm}0.50$)은 급식유형에 따라 유의적 차이를 나타내었다. 급식유형에 따른 식행동, 식이자기효능감, 영양지식의 상관관계는 도시형, 농어촌형에서는 식행동, 식이자기효능감, 영양지식 모두 정의 상관관계를 보였고 유의한 차이를 나타냈다. 도서벽지형에서는 영양지식과 식이자기효능감과 관계(r=0.280), 식행동과 식이자기효능감과의 관계(r=0.510)는 유의적인 정의 상관관계로 나타났으나, 영양지식과 식행동의 관계(r=0.123)는 상관 정도가 유의적 차이를 나타내지 않았다. 식행동의 예측 변인을 확인하기 위해, 식행동과 유의한 관계가 있는 것으로 나타난 식이자기효능감과 영양지식을 독립변수로 단계별로 변수를 투입하여 회귀 분석한 결과 도시형(식이자기효능감, 영양지식)에서는 식이자기효능감과 영양지식이식행동에 영향력을 주는 요인으로 나타났다. 반면에 농어촌형(식이자기효능감)과 도서벽지형(식이자기효능감)에서는 식이자기효능감만이 식행동에 영향을 주는 요인으로 나타났다. 이상의 결과를 종합해 볼 때, 급식유형에 따라서 식행동, 식이자기효능감, 영양지식간의 평균점수는 유의적 차이가 없었으나 세부 항목에서는 급식유형별 차이를 나타내었고, 식행동의 행동 변화에 영향을 줄 수 있는 요인으로 식이자기효능감과 영양지식의 상관관계를 분석하고 다중회귀분석을 실시한 결과 도시형학교에서는 식이자기효능감과 영양지식이 식행동에 영향을 미치는 요인으로 나타난 반면, 농어촌형과 도서벽지형에서는 식이자기효능감만이 식행동에 영향을 미치는 요인으로 나타났다. 영양지식은 도시형에서는 식행동에 영향을 주는 요인으로 나타났으나 농어촌형과 도서벽지형에서는 식행동에 영향을 주는 요인으로 작용하지 않았다. 따라서 초등학교 아동을 대상으로 영양교육프로그램 개발 시에 식이자기효능감을 증진시킬 수 있고 영양지식 및 영양정보의 획득에 중점을 두는 인식주위의 프로그램보다는 실생활에서 실천할 수 있는 구체적 영양교육에 초점을 두어, 지식증대가 아닌 행동변화에 맞추는 영양교육 프로그램의 개발이 필요하다고 생각된다.

Sensory Information Processing

  • Yoshimoto, Chiyoshi
    • 대한의용생체공학회:의공학회지
    • /
    • 제6권2호
    • /
    • pp.1-8
    • /
    • 1985
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

  • PDF

High Resolution HC$_3$N Observations toward the Central Region of Sagittarius B2

  • H.S-Ching;Oh, M.ishi;M.Morimoto
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 1993년도 한국우주과학회보 제2권2호
    • /
    • pp.17-17
    • /
    • 1993
  • The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

  • PDF

성대마비와 양성 성대점막질환의 음향학적 특성비교 (Comparative Study on Acoustic Characteristics of Vocal Fold Paralysis and Benign Mucosal Disorders of Vocal Fold)

  • 공일승;조영주;이명희;김종승;양윤수;홍기환
    • 대한후두음성언어의학회지
    • /
    • 제18권2호
    • /
    • pp.122-128
    • /
    • 2007
  • This study aims to analyze the voices of the patients with voice disorders including vocal fold paralysis, vocal fold cyst and vocal nodule/polyp in the aspect of acoustic phonetics. This study intends to collect subsidiary acoustic data in order to make a speech treatment and an standardization of vocal disorders. Subjects and Methods: The subjects of this study were 64 adult patients who underwent indirect laryngoscopy and laryngostroboscopy, and were diagnosed as vocal fold paralysis, vocal fold cyst or vocal nodule/polyp. Experimental group consisted of 20 patients who were diagnosed as vocal fold paralysis, 21 patients who were diagnosed as vocal fold cyst and had the average age of 42.0 $({\pm}10.03)$ ; and 23 patients who were diagnosed as vocal nodule/polyp and had the average age of 40.9 $({\pm}13.75)$. For the methodology of this study, the patients listed above were asked to sit in a comfortable position at intervals of 10cm apart from the patient's mouth and a microphone, and subsequently to phonate a vowel sound /e/ for the maximum phonation time with natural tone and vocal volume then the sound was directly inputted on a computer. During recording, sampling rate was set to 44,100Hz and the 1-second area corresponding to stable zone except the first and the last stage of waveform of the vowel sound /e/ vocalized by the individual patients was analyzed. Results: First, there was no statistically significant difference in jitter and shimmer between vocal fold paralysis and vocal fold cyst, while there was highly statistically significant difference in them between vocal fold paralysis and vocal nodule/polyp. Second, looking into the mean values obtained from NNE, HNR and SNR results associated with noise ratio, the disease showing the most abnormal characteristics was vocal fold paralysis, followed by cyst and nodule/polyp in order. For NNE, there was statistically significant difference between vocal nodule/polyp, and cyst or paralysis. In other words, it was found that the NNE of vocal nodule/polyp was weaker than that of cyst or paralysis. Similarly, HNR and SNR also showed the same characteristics; there was statistically significant difference between vocal fold paralysis and vocal fold cyst or nodule/polyp, and HNR and SNR values of vocal fold paralysis were lower than those of vocal fold cyst or nodule/polyp. Conclusion: For vocal fold paralysis, the abnormal values of acoustic parameters associated with frequency, amplitude and noise ratio were statistically significantly higher than those of vocal fold cyst and nodule/polyp. This finding suggests that the voices of the patients with vocal fold paralysis are the most severely injured due to less stability of vocal fold movement, asymmetry and incomplete glottic closure. In addition, there was no statistically significant difference in the acoustic parameters of tremor among vocal fold paralysis, vocal fold cyst and vocal nodule/polyp. Further studies need to ascertain reasonable acoustic parameters with various vocal disorders as well as to clarify the correlation between acoustics-based objective tools and subjective evaluations.

  • PDF

산업장 교대근무 근로자의 건강증진행위 예측요인 (Predictive Factors of Health promotion behaviors of Industrial Shift Workers)

  • 김영미
    • 한국직업건강간호학회지
    • /
    • 제11권1호
    • /
    • pp.13-30
    • /
    • 2002
  • Industrial shift workers feels suffer mental stresses which are caused by unfamiliar day sleep, noisy environment, sleeping disorder by bright light, unusual contacts with family, difficulty in meeting with friends or having formal social meetings and other social limitations such as the use of transportation. Such stresses influence health of the workers negatively. Thus the health promotion policy for shift workers should be made considering the workers' ways of living and shift work specially. This study attempted to provide basic information for development of the health promotion program for industrial shift workers by examining predictive factors influencing health promotion behaviors of those workers. In designing the study, three power generation plants located in Pusan and south Kyungsang province were randomly selected and therefrom 280 workers at central control, boiler and turbine rooms and environmental chemistry parts whose processes require shift works were sampled as subjects of the study. Data were collected two times from September 17 to October 8, 1999 using questionnaires with helps of safety and health managers of the plants. The questionnaires were distributed through mails or direct visits. Means for the study included the measurement tool of health promotion behavior provided by Park(1995), the tool of self-efficacy measurement by Suh(1995), the tool of internal locus of control measurement by Oh(1987), the measurement tool of perceived health state by Park(1995) and the tool of social support measurement by Paek(1995). The collected data were analyzed using SPSS program. Controlling factors of the subjects were evaluated in terms of frequency and percentage ratio Perceived factors and health promotion behaviors of the subjects were done so in terms of mean and standard deviation, and average mark and standard deviation, respectively. Relations between controlling and perceived factors were analyzed using t-test and ANOVA and those between perceived factors and the performance of health promotion behaviors, using Pearson's Correlation Coefficient. The performance of health promotion behaviors was tested using t-test, ANOVA and post multi-comparison (Scheffe test). Predictive factors of health promotion behavior were examined through the Stepwise Multiple Regression Analysis. Results of the study are summarized as follows. 1. The performance of health promotion behaviors by the subjects was evaluated as having the value of mean, $161.27{\pm}26.73$ points(min.:60, max.:240) and average mark, $2.68{\pm}0.44$ points(min.:1, max.:4). When the performance was analyzed according to related aspects, it showed the highest level in harmonious relation with average mark, $3.15{\pm}.56$ points, followed by hygienic life($3.03{\pm}.55$), self-realization ($2.84{\pm}.55$), emotional support($2.73{\pm}.61$), regular meals($2.71{\pm}.76$), self-control($2.62{\pm}.63$), health diet($2.62{\pm}.56$), rest and sleep($2.60{\pm}.59$), exercise and activity($2.53{\pm}.57$), diet control($2.52{\pm}.56$) and special health management($2.06{\pm}.65$). 2. In relations between perceived factors of the subjects(self-efficacy, internal locus of control, perceived health state) and the performance of health promotion behaviors, the performance was found having significantly pure relations with self-efficacy (r=.524, P=.000), internal locus of control (r=.225, P=.000) and perceived health state(r=.244, P=.000). The higher each evaluated point of the three factors was, the higher the performance was in level. 3. When relations between the controlling factors(demography-based social, health-related, job-related and human relations characteristics) and the performance of health promotion behaviors were analyzed, the performance showed significant differences according to marital status (t=2.09, P= .03), religion(F=3.93, P= .00) and participation in religious activities (F=8.10, P= .00) out of demography-based characteristics, medical examination results (F=7.20, P= .00) and methods of the collection of health knowledge and information(F=3.41, P= .01) and methods of desired health education(F=3.41, P= .01) out of health-related characteristics, detrimental factors perception(F=4.49, P= .01) and job satisfaction(F=8.41, P= .00) out of job-related characteristics and social support(F=14.69, P= .00) out of human relations characteristics. 4. The factor which is a variable predicting best the performance of health promotion behaviors by the subjects was the self-efficacy accounting for 27.4% of the prediction, followed by participation in religious activities, social support, job satisfaction, received health state and internal locus of control in order all of which totally account for 41.0%. In conclusion, the predictive factor which most influence the performance of health promotion behaviors by shift workers was self-efficacy. To promote the sense, therefore, it is necessary to develop the nursing intervention program considering predictive factors as variables identified in this study. Further industrial nurses should play their roles actively to help shift workers increase their capability of self-management of health.

  • PDF