• 한국식품조리과학회지
• /
• 제33권2호
• /
• pp.148-154
• /
• 2017

Purpose: Frozen Korean traditional rice cakes (Sulgitteok and Garaetteok) were evaluated different conditions ($-20^{\circ}C$ and $-10^{\circ}C$) freezing (magnetic resonance quick freezing and air blast freezing) to study differences in quality characteristics. Methods: Experiments analyze Korean rice cakes for water content, water activity, color, textural properties, and sensory characteristics. Results: Moisture content showed high value at $-20^{\circ}C$ freezing regardless of freezing method. Water activity was higher at $-20^{\circ}C$ than $-10^{\circ}C$, and water activity higher magnetic resonance quick freezing than air blast freezing. The lightness values were higher $-20^{\circ}C$ freezing temperature compare to $-10^{\circ}C$ freezing temperature. Hardness and chewiness were the lowest $-20^{\circ}C$ magnetic resonance quick freezing. sensory evaluation both Sulgitteok and Garaetteok showed better overall acceptability at $-20^{\circ}C$ magnetic resonance quick freezing. Conclusion: Therefore, the $-20^{\circ}C$ magnetic resonance quick freezing method resulted in favorable textural properties and sensory characteristics.

• Restorative Dentistry and Endodontics
• /
• 제34권6호
• /
• pp.491-499
• /
• 2009

본 연구의 목적은 구강상피세포를 배양한후 각기 다른 조건의 냉동 보존법으로 6일간 보존시 각각의 세포의 활성도를 Cell counting, WST-1, Clonogenic capacity의 방법을 이용하여 비교 평가하기 위함이다. 각 실험군당 $1\times10^6$개의 세포를 다음의 방법으로 6일간 냉동 보존한다. Freezing container에 담아 $1^{\circ}C$/min의 냉동속도로 $-70^{\circ}C$까지 냉동 후 $-196^{\circ}C$에 냉동하여 보관한 일반 냉동 보존군, 세포를 바로 $-196^{\circ}C$의 액화질소에 넣어 냉동한 급속 냉동 보존군, $4^{\circ}C$에서 $-35^{\circ}C$까지 $-0.5^{\circ}C$/min속도로 서서히 냉동시킨 뒤 $-196^{\circ}C$에 냉동한 저속 냉동 보존군, 2 Mpa, 3 Mpa의 압력을 가하고 $-0.5^{\circ}C$/min속도로 $4^{\circ}C$에서 $-35^{\circ}C$까지 서서히 냉동시킨 뒤 $-196^{\circ}C$에 냉동한 2 Mpa, 3 Mpa압력 저속 냉동 보존군으로 나누었다. 6일 후 냉동되었던 세포를 급속 해빙하여 각각의 Cell counting, WST-1, Clonogenic capacity 값을 측정하여 비교하였다. 실험 결과 2 Mpa혹은 3 Mpa의 압력을 이용한 저속 냉동법이 저속 냉동법 및 급속 냉동법 보다 세포 활성도에 있어 우수한 경향을 나타내었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권5호
• /
• pp.527-534
• /
• 1997

Freezing of an aqueous sodium cWoride solution (Nacl- H20) saturating a packed bed with ini¬tial salt concentrations of 5, 10, 15(k by weight is investigated experimentally in a rectangular cav¬ity. The system was cooled from the top, bottom and a vertical side wall. For the freezing experi¬ments from below, there was little effect of the initial salt concentration throughout the freezing process, and the global freezing rate was not affected by the initial salt concentration. For the freezing from above, the size of the mush region decreased and the mushlliquid interface became flatter as the initial liquid concentration is decreased. For the freezing from vertical side wall, reheating of the mixture was intensified with an increase in the initial salt concentration. For Ci= 5%, supercooling was observed only at the early times of freezing process, but for Ci= 15% small supercooling was observed throughout the freezing process.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권5호
• /
• pp.680-686
• /
• 1998

In the adoption of a desalination system the most important factor is the cost of fresh water pro-duction. In general LNG is stored in a tank as a liquid state below $-162^{\circ}C$ When it is serviced however the LNG absorbs energy from a heat source and it is transformed to a high pressure gaseous state. During this process a huge amount of cold energy accumulated in cooling LNG is wasted. This wasted cold energycan be utilized to produce fresh water by using a sea water freez-ing desalination system. in order to develop a sea water freezing desalination system and to estab-lish its design technique qualitative and quantitative data regarding the freezing behavior of sea water is required in advance. The goals of this study are to reveal the freezing mechanisms of sea water in a cooled circular tube to measure the freezing rate and to investigate the freezing heat-transfer characteristics. The experimental results provide a general understanding of sea water freezing behavior in a cooled circular tube.

• Journal of Biosystems Engineering
• /
• 제33권1호
• /
• pp.21-29
• /
• 2008

In this study, the thermal properties of peeled chestnuts were measured, and the mathematical prediction model of freezing time was also developed for various interior positions from center to rind (surface). The measured thermal properties were showed that heat conductivity is $0.43W/m^{\circ}C$, specific heat is $2.7206J/m^3^{\circ}C$, latent heat is $216.9{\times}10^6J/m^3$ and freezing point is $-2.8^{\circ}C$. The entire process about reaching to the freezing time of peeled chestnuts was analyzed with its each regular depth position using the finite difference method (FDM) based on computer simulation. In case of regular freezing temperature, it was showed an that surface (rind) position is more rapidly reached into the freezing point rather than the center position, and also reaching time to the freezing point is more fast at the lower freezing temperature. Comparison results between simulation and experiments showed linear relationship. In regularly varying condition for freezing temperature, this method would give an information to predict a freezing time of the interior points for peeled chestnuts and more similar agricultural products.

• 한국축산식품학회지
• /
• 제36권5호
• /
• pp.650-655
• /
• 2016

This study investigated the effects of artificial supercooling followed by still air freezing (SSF) on the qualities of pork loin. The qualities of pork frozen by SSF were compared with the fresh control (CT, stored at 4℃ for 24 h), slow freezing (SAF, still air freezing) and rapid freezing (EIF, ethanol immersion freezing) treatments. Compared with no supercooling phenomena of SAF and EIF, the extent of supercooling obtained by SSF treatment was 1.4℃. Despite that SSF was conducted with the same method with SAF, application of artificial supercooling accelerated the phase transition (traverse from -0.6℃ to -5℃) from 3.07 h (SAF) to 2.23 h (SSF). The observation of a microstructure indicated that the SSF prevented tissue damage caused by ice crystallization and maintained the structural integrity. The estimated quality parameters reflected that SSF exhibited superior meat quality compared with slow freezing (SAF). SSF showed better water-holding capacity (lower thawing loss, cooking loss and expressible moisture) and tenderness than SAF, and these quality parameters of SSF were not significantly different with ultra-fast freezing treatment (EIF). Consequently, the results demonstrated that the generation of supercooling followed by conventional freezing potentially had the advantage of minimizing the quality deterioration caused by the slow freezing of meat.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권4호
• /
• pp.529-537
• /
• 1998

Currently as due to the rapid development of industry and increase in population we meet serious problems concerning the shortage and pollution of water. In the country many experts predict a shortage of water approaching 450 million tons by the year 2006. To cope with this serious problem it is necessary to construct desalination plants. In the adoption of a desalination system the most important factor is the cost of fresh water production,. In general LNG is stored in a tank as a liquid state below $-162^{\circ}C$. When it is serviced, however the LNG absorbs energy from a heat source and transforms to a high pressure gaseous state. During this process a huge amount of cold energy accumulated in cooling LNG is wasted. This wasted cold energy can be utilized to produce fresh water by using a sea water freezing desalination system. In order to develop a sea water freezing desalination system and to establish its design technique qualitative and quantitative data regarding the freezing behavior of sea water is required in advance, The goals of this study are to reveal the freezing behavior of sea water is required in advance. The goals of this study are to reveal the freezing mechanisms of sea water to measure the freezing rate and to investigate the freezing heat-transfer characteristics,. The experimental results will provide a general understanding of sea water freezing behavior in a rectangular vessel cooled from above.

• Clinical and Experimental Reproductive Medicine
• /
• 제27권3호
• /
• pp.283-289
• /
• 2000

Objective: The study was performed to compare the survival rate and the development of day 2 mouse embryos which had freezing procedures done. Methods: We used three different vitrification solutions (EFS, VS14, DPS) and a ultrarapid freezing solution (UFS) for cryopreservation of day 2 mouse embryo. Results: We tested toxicity by exposing embryos to vitirification solutions and a ultrarapid freezing solution. The survival rates are 100%, 97.8%, 95.6% and 100% (EFS, VS14, DPS and UFS). After cultured for 96 hours, hatching rates of each group are 93.5% (no freezing), 95.6% (EFS), 86.4% (VS14), 93.0% (DPS), and 93.0% (UFS). There is no significant differences among groups. The survival rates after thawing cryopreserved embryos are 80.2%, 91.7%, 69.5%, 0% and 91.8% (slow freezing, EFS, VS14, DPS and UFS). Also cultured for 96 hours, the hatching rates are 93.5% (no freezing), 84.1% (slow freezing), 93.9% (EFS), 48.5% (VS14) and 70.1% (UFS). Conclusion: The survival rates of vitrification in EFS solution and ultrarapid freezing are higher than slow freezing (p<0.05). The hatching rate of vitrification in EFS solution cultured for 96 hours is highest, so vitrification of day 2 mouse embryos in EFS solution considered as more effective for cryopreservation.

• 한국도로학회논문집
• /
• 제7권2호
• /
• pp.87-95
• /
• 2005

동절기에 대기온도가 영하로 내려감에 따라 포장하부층의 동결 및 응해가 반복되어 포장체의 구조적 성능이 저하된다. 이를 방지하기 위하여 동상에 대한 많은 연구가 수행되었으며, 그 결과, 우리나라 전역의 동결지수선도가 작성되어 동상방지층 설계 등의 도로건설에 이용되고 있다. 하지만, 포장층의 두께와 재료, 그리고 지형에 따른 동결심도의 변화에 대한 조사가 체계적으로 이루어지지 않아 현행 동상방지층 설계의 유효성에 대한 평가가 시급한 실정이다. 본 논문에서는 한국도로공사 시험도로에서 측정되는 대기온도 자료와 콘크리트 및 아스팔트 포장의 깊이별 온도 및 함수량 자료를 이용하여, 시험도로의 동결지수 및 동결가능 깊이를 조사하였다. 또한, 조사된 결과를 기존의 동결심도 추정식에 의한 결과와 비교하였다. 본 연구는 시험도로에서 측정된 동결 관련자료에 대한 초기연구로서 , 장기적인 자료의 축적과 분석을 통하여 보다 신뢰성 있는 결과가 도출될 수 있을 것으로 판단된다.

• 한국식품과학회지
• /
• 제20권2호
• /
• pp.280-286
• /
• 1988

이상과 같이, 기존 data의 정확도에 대한 고찰과 본 연구에서 소개한 단순한 해석적 방법에 의한 식품의 동결 시간예측 model로서, 실제 측정한 시료별 실험치와 기존 model을 비교 검토하였다. 기 발표된 lean beef등 109개의 data중, Hung & Thompson의 data는 Nagaoka 및 Pham의 model에, Cleland & Earle의 data는 Hung $ Thompson의 model에 매우 접근함을 볼 수 있으며, 시료별로 살펴볼 때, tylose등 5품목의 시료는 Nagaoka 및 Pham의 model에 잘 적용됨을 알 수 있다. 그러나 본 실험에서 사용한 pine mushroom등 4품목은 Cleland & Earle, Hung & Tompson 및 Pham의 model에 잘 부합되며, 제안된 model의 간편성과 정확도에 있어서도 단지 3가지의 실험적 매개변수와 7가지의 물성치 만으로 실험치와 비교한 결과, 공학적 최소오차 범위인 ${\pm}10%$ 이내로 나타났다.