• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.664-667
• /
• 1997

In this study, it is attempted to obtain the optimized size of holes in 15 square plate models where a hole exists on every quadrant of a plate, and to get eigenvalues and mode shapes by performing free vibration analysis for each model. For free vibration analysis and optimization of' hole sizes, the uniaxial tension is applied for the loading condition. From the results of this study, it is known that more stable structures can be designed by changing the natural frequency depending on the location and the optuiiunl size of holes. and further studies are considered to be necessary for the basic design information.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표회 논문집(I)
• /
• pp.151-156
• /
• 1998

Concrete structures is appeared the shrinkage after being harden of the hydration effect of cement. To overcome this disadvantage, expansive additives are used. In our country, the most popular expansive additives are hauyne(CSA) or free lime(free-CaO) systems. These expansive additives are used to expansive cement mortar or concrete materials. In this study, we analyzed the expansive property mechanism about the hydration reaction of the free lime systems and in particular we convinced size distributions of the free lime size affect the expansion ratio with expansion ratio with experiments. We carried out the experiment for the expansive properties by using the soundness molds and with various the humidity and dry setting conditions. The hydration reactions of the free lime affect the reaction properties according to the relative humidity by laboratory experiments.

• 한국자동차공학회논문집
• /
• 제13권6호
• /
• pp.7-12
• /
• 2005

In order to analyze the microscopic spray characteristics of free spray in ultra high pressure region, the droplets size and velocity of free spray injected under atmosphere condition were measured by PDPA. As injection pressure became ultra high pressure, the droplets size was decreased continuously due to the increase of mutual reaction between droplets and air. But the decreasing rate became moderate. The velocity was increased until 250 MPa, and then decreased over that of injection pressure. It was seemed that the droplet size was similar in range of $280\~350\;MPa$, but increased in 414 MPa, even though injection pressure was increased. The microscopic spray characteristics of free spray got worse in 414 MPa.

• Archives of Reconstructive Microsurgery
• /
• 제25권1호
• /
• pp.7-11
• /
• 2016

Purpose: In recent decades, amputation is still recommended for patients with extensive lower extremity wounds requiring coverage. Although the feet contribute relatively little to total body surface area, they are essential organ for ambulation, and a high mortality rate after amputation has been reported. We report on 10 challenging cases of a mangled foot which was reconstructed using an anterolateral thigh (ALT) free flap, and analyze the advantages and disadvantages of this technique. Materials and Methods: This retrospective study was conducted on 10 patients who underwent reconstructive surgery on a foot. Patients' charts were reviewed for age, sex, causes, defect size and site, flap size and type, flap type, and complications. Cases with a defect size of > $100cm^2$ were included. Results: Seven of the 10 patients were male, and overall mean age was 38.5 years (range, 22 to 61 years). Mean defect size was $179.6cm^2$ (range, 104 to $330cm^2$), and mean flap size was $193cm^2$ (range, 120 to $408cm^2$). Three cases were reconstructed with a musculocutaneous free flap and seven cases were reconstructed with a fasciocutaneous free flap. There were two occurrences of local wound complication. All ten flaps survived well, however five patients underwent a debulking procedure to reduce flap volume. Conclusion: Reconstruction of a near completely degloved soft tissue defect or a wide defect containing two or more surfaces of extremity with an ALT free flap was performed. The purpose of this case study is to report on free tissue transfer using the ALT flap for salvage of the lower extremity.

• 아태비즈니스연구
• /
• 제14권1호
• /
• pp.341-350
• /
• 2023

Purpose - How are gains from trade distributed between countries when economic integration is achieved through free trade? The purpose of this paper is to answer this question. Design/methodology/approach - This study attempts to address the issue of distribution of trade gains between participating countries following economic integration in terms of positive economics. The analysis is therefore based on a theoretical methodology. Findings - First, commodity prices fall and consumer surplus increases in both large and small countries. Second, when economic integration into free trade is achieved, gains from trade always exist in small countries. However, the size of trade gains depends on the degree of difference from the market size of the partner country, the large country. However, the size of the gains from trade depends on the extent of difference between the market size of the large country. If the market size of a large country is much larger and there is a large difference, trade gains will be very large, whereas if the market size is similar, profits of domestic firm will decrease. Therefore, in that case, the size of the gains from trade becomes relatively small because only the gains from exchange exists. On the other hand, in a large country with a large market size, there is a possibility of trade gains only when the market size is similar to that of a small country, which is a trading partner. However, if there is a large difference in market size, the decrease in profits of domestic firm is relatively larger than the increase in consumer surplus due to trade, and rather, a trade loss occurs. Research implications or Originality - Our analysis contributes to filling the gaps in the literature regarding the distribution of gains from trade, and from a policy point of view, it is meaningful in examining the impact of market size, an important variable considered in regional economic integration of countries.

• Archives of Plastic Surgery
• /
• 제49권1호
• /
• pp.61-69
• /
• 2022

Background Single free flaps are a commonly used reconstructive method for multiple soft tissue defects in digits. We analyzed the flap size, division timing, and degree of necrosis in cases with various types of flap division. Methods We conducted a retrospective review of the medical charts of patients who had undergone single free flap reconstruction for multiple soft tissue defects across their digits from 2011 to 2020. The flap types included were the lateral arm free flap, venous forearm free flap, thenar free flap, hypothenar free flap, anterolateral thigh free flap, medial plantar free flap, and second toe pulp free flap. Flap size, anastomosed vessels, division timing, and occurrence of flap necrosis were retrospectively investigated and then analyzed using the t-test. Results In total, 75 patients were included in the analysis. The success rate of the free flaps was 97.3%. All flaps were successfully divided after at least 17 days, with a mean of 47.17 days (range, 17-243 days) for large flaps and 42.81 days (range, 20-130 days) for the medium and small flaps (P=0.596). The mean area of flap necrosis was 2.38% in the large flaps and 2.58% in the medium and small flaps (P=0.935). Severe necrosis of the divided flap developed in two patients who had undergone flap division at week 6 and week 34. Conclusions In cases where blood flow to the flap has been stable for more than 3 weeks, flap division can be safely attempted regardless of the flap size.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.425-428
• /
• 2015

New technologies using a CNC machine are being developed to reduce the production cost of free-form buildings. For production of free-form members using such technologies, vast free-form buildings should be first split into multiple panels that are productible. Taking into consideration of the curved surface of free-form members, the segmented free-form panels may vary in shape and size, which may cause a lot of errors. In addition, it is time-consuming for the work. However, the current panelizing work is completed with the trials and errors of engineers and architectural designers even in large-scale projects, which results in increased construction duration and cost. Thus, it is necessary to develop a technology for panelizing free-form panels so as to maximize the economic feasibility of production technologies for free-form concrete members. The study intends to develeop automatic panelizing algorithms of free-form buildings considering the curved surface and size of free-form panels and the production conditions. The developed algorithms will be useful in applying the production technologies of free-form buildings using CNC machine and reducing the cost.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.685-687
• /
• 1999

We prepared ZnO thin film with Facing Targets Sputtering system that can deposit thin film in plasma-free situation and change the deposition condition in wide range. And prepared thin films c-axis orientation and grain size were analyzed by XRD(x-ray dffractometer). In the results, we suggest that FTS system is very suitable to preparing high quality ZnO thin film with good c-axis orientation.

• 아동학회지
• /
• 제31권6호
• /
• pp.35-50
• /
• 2010

Joint attention, language development, and the relationship between these two variables were compared in infants from multi-cultural and Korean families. Joint attention was observed in both the Early Social Communication Scale (ESCS) and in infant-mother free play. Language development was evaluated by means of the MacArthur-Bates Communicative Development Inventory-Korean. There were no group differences in initiating and responding to joint attention in ESCS. However, in infant-mother free play, joint attention episodes were less and shorter in duration with infants from multi-cultural families than in Korean infants. The size of both the expressive and receptive vocabulary was also smaller in infants from multi-cultural families than in Korean infants. In terms of Korean infants, mean duration of joint attention episodes in free play showed a significant positive correlation with the size of the expressive vocabulary and initiating joint attention in ESCS also showed a significant positive correlation with the size of receptive vocabulary. However, none of the measures of joint attention indicated a significant relationship with the size of either expressive or receptive vocabulary in infants from multi-cultural families.

• 폴리머
• /
• 제26권4호
• /
• pp.535-542
• /
• 2002

투석법을 이ctide-co-glycolide) (PLGA) 나노입자를 제조하고 다양한 용매에 따른 입자 크기, 약물 함유량, 생분해도 등과 같은 물리ㆍ화학적 특성을 조사하였다. Dimethylacetamide (DMAc), dimethylformamide (DMF), dimethylsulfoxide (DMSO)로 제조된 PLGA 나노입자의 크기는 acetone으로 제조한 입자보다 적었다. 또한, 약물 함유량은 DMAc>DMF>DMSO=acetone 순서였다. PLGA 나노입자는 scanning electron microscopy (SEM)과 transmission electron microscopy (TEM)의 측정으로 구형임을 알 수 있었다. 계면활성제를 사용하지 않는 나노입자에 봉입된 norfloxacin (NFx)은 X-ray diffraction 분석을 통하여 입자 표면에 약물을 가지지 않는 좋은 약물 봉입 효율을 가짐을 알 수 있었다. 모델약물로 사용된 NFx의 방출속도는 약물 함유량뿐만 아니라 입사크기에 의해 좌우된다. 또한 PLGA 나노입자의 분해속도는 아세톤보다는 DMF를 사용하였을 때 더 빠르며 이는 PLGA 나노입자의 생분해성도 입자크기에 좌우된다는 것을 알 수 있었다.