• Korean Journal of Optics and Photonics
• /
• v.32 no.4
• /
• pp.163-171
• /
• 2021

Conventional white light-emitting diodes (LEDs) for lighting applications consist of blue LEDs and yellow phosphors, the spectrum of which lacks deep red. To improve the color-rendering characteristics of white LEDs, a red quantum-dot film was applied to the diffuser plate of LED lighting. The mean free paths of the quantum dots and the concentration of the TiO₂ particles in the diffuser plate were adjusted to optimize the optical structure of the lighting. The color-rendering index (CRI) was greater than 90 for most conditions, which demonstrates that adoption of the red quantum-dot film is an effective way for improving the color-rendering properties of conventional white LEDs. The angular dispersion of color coordinates could be removed by utilizing the optical cavity formed between the diffuser plate and the reflector on the bottom of the lighting, where multiple passages of the light through the quantum-dot film reduced the differences in optical path length depending on the viewing angle.

• Journal of Korean Foot and Ankle Society
• /
• v.22 no.4
• /
• pp.156-160
• /
• 2018

Purpose: Chronic tophaceous gout is a painful and disabling inflammatory disease. Surgical treatment for chronic tophaceous gout is very difficult with many complications. This study evaluated the efficacy of shortening scarf osteotomy on the treatment of chronic tophaceous gout in the 1st metatarso-phalangeal (MTP) joint. Materials and Methods: From January 2006 to December 2015, 14 patients (19 cases) who underwent axial shortening scarf osteotomy for chronic tophaceous gout were reviewed. All patients were male. The average age at the time of surgery was 59.6 years (42~66 years). The minimum follow-up was 24 months. Total removal of the tophi mass with the adhered medial capsule of the 1st MTP joint was attempted. Axial shortening scarf osteotomy was done on the 1st metatarsal shaft. The visual analogue scale (VAS) for pain and the American Orthopaedic Foot and Ankle Society (AOFAS) forefoot score was assessed preoperatively and postoperatively. The range of motion (ROM) of the 1st MTP joint was also compared pre- and postoperatively. Results: The average size of the extracted tophaceous mass was 32 mm. The mean amount of the length of metatarsal shortening was 4.9 mm. The mean ROM of the 1st MTP joint was improved from $30.4^{\circ}$ to $62.3^{\circ}$. The mean AOFAS forefoot score improved from 51.4 to 86.6 points. The mean VAS for pain improved from 4.6 to 0.3 points. Conclusion: The axial shortening scarf osteotomy used on chronic tophaceous gout could reconstruct the 1st MTP joint with an improved ROM and was free of pain. Axial shortening scarf osteotomy is suggested as a useful and effective method for the treatment of chronic tophaceous gout.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.1
• /
• pp.11-21
• /
• 2022

Currently, in the domestic construction industry, the free web method has been emerging as a potential solution to the shortage of skilled workers due to the prolonged COVID-19 crisis, as it helps in securing economic feasibility through shortening the construction period and reducing labor costs. To consider one part of the construction method, in this study, the bending behavior according to the load was evaluated for the SY slope-type beam formwork, which was manufactured at a factory, assembled with rebar, brought into the site, and then poured into the site. For the SY Beam standard cross-sectional shape, a cross-sectional dimensional width of 400mm and depth 600mm determined through structural modeling using the MIDAS GEN program were applied. A total of 6 specimens were made with a member length of 5,000mm, 5 specimens and one RC specimen in the comparison group were manufactured in real-size format using the thickness of the steel plate(0.8, 1.0, 1.2mm) as a variable, and bending experiments were performed. In the bending test, the steel plate deck showed high initial stiffness and maximum strength as it yielded, which showed that it sufficiently contributed to the flexural strength. It is judged that additional analysis and experimental studies for 1.05, 1.1, and 1.15mm are needed to derive the appropriate steel plate thickness and the method for calculating the tensile force contribution of the steel plate to secure the manufacturing, construction and economic feasibility of SY Beam in the future.

• Korean Journal of Ichthyology
• /
• v.34 no.2
• /
• pp.127-132
• /
• 2022

Most of the downstream of the river is blocked by beams, so fishways are required for the movement of conciliatory fish species and connection with the upstream. Therefore, it is very important as an ecological pier that can help free movement of fish. The three previously installed eel ladders use only brushes on the bottom. For find out the effect of the bottom material except to brush, experimented used model glass eel ladders to the ascent of glass eel. The eel ladder model was 1.2 m length, 0.3 m wide, and 0.1 m high, and three gravels of different particles were attached to the bottom of the fish ladder setting on the Geumgang Estuary Bank. The first model ladder was made of gravel with particles of 5 mm, and the second model ladder was made of gravel with particles of 2 mm. The third model ladder was made by solidifying with particles of 1 mm or less cement. All experiments were repeated 5 times for 1 hour. As a result of the experiment, the lower the angle, and the smaller the gravel particles, the more glass eels are ascended to the ladder, but the made of cement was nearly not ascent. The gravel-bottom model ladder has a lower discharge and flow rate than the brush ladder so more glass eels can ascent ladder, and if the glass eel ladder is improved through experiments applying various floor materials and variables in the future, more glass eels are going to ascent glass eel ladder.

• Journal of Korean Foot and Ankle Society
• /
• v.26 no.3
• /
• pp.130-135
• /
• 2022

Purpose: Smart insoles are wearable devices that are inserted into shoes. Smart insoles with built-in pressure and acceleration sensors can measure the plantar pressure, stride length, and walking speed. This study evaluated the validity and reliability of the plantar pressure measurements of smart insoles during walking on flat ground. Materials and Methods: Twenty one subjects were included in this study. After wearing smart insoles, I-SOL^® (Gilon, Seongnam, Korea), the subjects walked a 10 m corridor six times at a rate of 100 steps/min, and the middle three steps, free from direction changes, were chosen for data analysis. The same protocol was repeated after wearing Pedar-X (Novel Corporation, Munich, Germany), an insoletype plantar pressure measurement equipment with proven validity. The average maximum pressure (P_peak, kPa) and the time at which P_peak appeared (P_time, %stride) were calculated for each device. The validity of smart insoles was evaluated by using the interclass correlation coefficient (ICC) of P_peak and P_time between the two instruments, and Cronbach's alpha was obtained from the P_peak values to evaluate the reliability. Results: The ICC of P_peak was 0.651 (good) in the hallux, 0.744 (good) in the medial forefoot, 0.839 (excellent) in the lateral forefoot, and 0.854 (excellent) in the hindfoot. The ICC of P_time showed 0.868 (excellent) in the hallux, 0.892 (excellent) in the medial forefoot, 0.721 (good) in the lateral forefoot, and 0.832 (excellent) in the hindfoot. All ICC values showed good or excellent results. The Cronbach's alpha of P_peak measured in the smart insoles was 0.990 in the hallux, 0.961 in the medial forefoot, 0.973 in the lateral forefoot, and 0.995 in the hindfoot; all indicated excellent reliability in all areas. Conclusion: The plantar pressure measurements of smart insoles during walking on a flat ground showed validity compared to Pedar-X, and high reliability after repeated measurements.

• Journal of Marine Life Science
• /
• v.1 no.1
• /
• pp.56-62
• /
• 2016

In the present study, to clarify a possible relevance of blind-side hypermelanosis to chronic stress in cultured flounders, P. olivaceus, a serial experiment was tried with comparison of biochemical stress factors between wild type and hypermelanic type in cultured olive flounders. The mean size of experimental animal was total length 21.5±0.42 cm and body weight 87.5±6.1 g. The initial malpigmented area rate on the blind side skin was 0.63±0.12% and 16.7±4.7%, respectively, in the wild type and the hypermelanic type. The stress factors surveyed in the experiment were glucose (GLU), total protein (TP), cortisol, free type-thyroid hormones (FT₃ and FT₄) in plasma, and also moisture, crude protein, crude lipid, and crude ash in body muscle. As a result, GLU and TP were higher in hypermelanic type than in wild type. Plasma cortisol was also higher in hypermelanic type than in wild type. In FT₃ and FT₄, any difference between two groups was not observed. In body nutrient factors, the moisture and the crude ash in body composition were not different between two groups, but the crude protein was low and the crude lipid was high in the hypermelanic type. Therefore, it is concluded that the blind-side hypermelanosis of cultured flounders could be related with a chronic stress.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4A
• /
• pp.353-359
• /
• 2010

Cementitious matrix based composites are vulnerable to the drying shrinkage crack during the curing process. In this study, the drying shrinkage induced fracture behavior of the fiber reinforced concrete is simulated and the effects of the fiber reinforcement conditions on the fracture characteristics are analysed. The numerical model is composed of conduit elements and rigid-body-spring elements on the identical irregular lattice topology, where the drying shrinkage is presented by the coupling of nonmechanical-mechanical behaviors handled by those respective element types. Semi-discrete fiber elements are applied within the rigid-body-spring network to model the fiber reinforcement. The shrinkage parameters are calibrated through the KS F 2424 free drying shrinkage test simulation and comparison of the time-shrinkage strain curves. Next, the KS F 2595 restrained drying shrinkage test is simulated for various fiber volume fractions and the numerical model is verified by comparison of the crack initiating time with the previous experimental results. In addition, the drying shrinkage cracking phenomenon is analysed with change in the length and the surface shape of the fibers, the measurement of the maximum crack width in the numerical experiment indicates the judgement of the crack controlling effect.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.3
• /
• pp.161-168
• /
• 2023

Converter slag is a by-product generated by refining the pig iron produced into molten steel in the blast furnace, occupying about 15 % of the weight of steel production. It has a high free-CaO content that can generate expansion cracks when used for concrete aggregate. This is the main reason to make it difficult to recycle. To solve this problem, government guideline requires that converter slag has to be aged in an open yard for 90 days. However, aging can not be perfectly performed because it entails time and cost. In this study, we tried to investigate the applicability of converter slag as a cementitious material rather than an aggregate by mixing converter slag with mortar formulations. According to the EDS results of the converter slag in the experiment, we found that screening in the aggregate phase was more effective than that in the powder phase. When the particles separated by a magnet in the aggregate state were pulverized and used for concrete up to a 15 % replacement ratio, various engineering characteristics, such as flow, length change, and compressive strength, showed engineering characteristics similar to those of the control mix.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2021.04a
• /
• pp.37-37
• /
• 2021

Calystegia soldanella L. is a perennial herbaceous halophyte belonging to the convolvulaceae family, which mainly grows in coastal sand dunes in Korea. Shoots and rhizomes are edible, and roots called 'Hyoseon Chogeun' are known to have medicinal effects such as antipyretic, sterilization, and diuretic. In addition, physiological activities of antioxidant, anti-inflammatory, antiviral, antifungal and PTP-1B (protein tyrosine phosphate-1B) inhibition have been reported. In this study, in vitro induction cell lines of C. soldanella L. collected from the coastal sand dunes in Jeju island was redifferentiated into adventitious roots that can be used as medicinal resources. Also the biomass of mass-proliferated adventitious roots using a bioreactor were evaluated. Plants of C. soldanella L. were collected from the crevice of the seashore in the coastal area of Taeheung 2-ri, Namwon-eup, Seogwipo-si. Then, it was separated into leaves, stems, rhizomes, and roots, and surface sterilized with 70% ethyl alcohol and 2% NaOCl (sodium hypochlorite). After washing with sterilized water, each organ section was cultured in Hormone-free MS medium (Murashige & Skoog Medium). As a result, the induction response rates were evaluated at 85% and 55%, respectively, in terms of callus formation and shoot generation in the rhizome segment. In the case of the adventitious roots morphological characteristics induced by single-use treatment of auxin-based plant growth regulators IBA and NAA from redifferentiated shoots were compared. Most efficient adventitious root culture method as a rooting rate, number, length, and biomass proliferation in the bioreactor system was confirmed when treated by culturing in MS salts, Sucrose 30 g·L^-1, and IBA 1mg·L^-1 for 4 weeks. In this study, the medium composition and culture period were confirmed using a bioreactor system to mass-proliferate adventitious roots derived from C. soldanella L. in Jeju island. Also this adventitious root line developed a new medicinal material could increase value of the bio-industry ingredient through quantitative and qualitative screening of phyto-bioactive compounds.

• Information Systems Review
• /
• v.25 no.1
• /
• pp.1-26
• /
• 2023

Consumers tend to trust information provided by other consumers more than information provided by sellers. Therefore, while inducing consumers to write high-quality reviews is a very important task for companies, it is not easy to produce such high-quality reviews. Based on previous research on review writing and memory recall, we decided to develop a way to use digital nudge to help consumers naturally write high-quality reviews. Specifically, we designed an experiment to verify the effect of uploading a photo during the online review process on the quality of review of the review writer. We then recruited subjects and then divided them into groups that upload photos first and groups that do not. A task was assigned to each subject to write positive and negative reviews. As a result, it was confirmed that the behavior of uploading a photo first increases the review length. In addition, it was confirmed that when online users who upload photos first have extremely negative satisfaction with the product, the extent of two-sidedness of the review content increases.