• 한국전산구조공학회논문집
• /
• 제19권4호
• /
• pp.357-367
• /
• 2006

재분배 기법은 민감도 해석 없이 변위에 대한 각 부재의 변위기여도를 간단하게 계산 한 후, 변위기여도에 근거하여 물량을 분배함으로서 변위를 제어할 수 있는 실용적인 고층건물 변위 설계법으로 인식되고 있다. 그러나 에너지 이론에 근거한 재분배 기법은 하중 조건에 따라서 서로 다른 변위기여도를 가질 수 있게 되며, 특히 횡력 뿐만 아니라 상당한 량의 연직하중도 함께 받고 있는 고층건물의 재분배 기법 적용시의 변위기여도 계산에는 연직하중의 영향이 고려하여야 한다. 또한, 고층 건물의 변위설계에 재분배 기법을 적용하기 위해서는 실용성을 높이기 위해서 부재 그룹핑이 고려되어지는데 부재 그룹핑 고려에 따른 연직하중의 영향을 다르게 나타나게 된다. 그러므로, 본 연구에서는 하중의 종류와 부재 그룹핑 여부를 변수로 하여 세 가지의 재분배 알고리즘을 개발한 후, 이를 20층 강접 골조 전단벽 예제와 60층 아웃리거 예제의 변위 설계 적용하였다.

• 디지털융복합연구
• /
• 제11권11호
• /
• pp.327-333
• /
• 2013

매우 다양한 건물들로 구성된 캠퍼스의 모든 건물들과 각 건물의 층별 호실(Room)들에 대한 정보를 쉽게 알 수 있는 방법은 거의 없다. 그런 이유로 본 논문에서는 캠퍼스 건물 정보의 입체적인 가시화를 위한 3D 시뮬레이션 시스템을 개발하였다. 본 시스템을 위해서는 실제 도면을 기반으로 각 건물 및 층별 단면도를 3D로 모델링하였으며, 실제 건물 외부 사진들을 사용하여 텍스처 매핑하였다. 사용자 인터페이스는 3D 뷰어, 메뉴 프레임으로 구분하였다. 만약 메뉴에서 건물명을 선택하면, 3D 뷰어는 선택한 건물을 줌(Zoom)하여 보여주고 메뉴 프레임은 건물과 관련된 각종 정보들을 보여주게 된다. 그리고 층별 호실(Room)을 선택하면 별도의 웹브라우저를 통하여 3D로 확인할 수 있게 하였다. 또한 3D 뷰어에서 건물을 클릭하면, 선택한 건물에 대한 정보들을 보여주게 된다. 본 시스템은 캠퍼스에 대한 건물 정보를 실감나게 제공해줄 수 있다는 점에서 매우 유용하다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권4호
• /
• pp.10-17
• /
• 2020

최근 국내에 발생한 지진으로 인해 많은 학교 건물들에 크고 작은 피해가 발생하였다. 학교 건축물은 재난 발생시 대피소로 사용되는 중요 건물로서 비내진 건축물일 경우 여러 방법으로 내진 보강이 진행 중이다. 내진보강 공법 중 내부 철골가새골조형 공법은 비교적 시공이 용이하고 성능이 우수하여 많이 사용되고 있다. 본 연구에서는 기존 철근콘크리트 학교 건물에 철골 가새 골조를 적용하여 수평반복가력해석을 수행하여 최대전단력 및 변위를 비교검토 하였다. 그 결과로 해석 모델의 적정성을 확인하였고, 기존 학교 건축물의 1경간에 대한 가새- 높이비에 따른 효과를 비교 검토하였다. 가새- 높이비 0.3의 모델에서 최대 전단내력과 변위관계에서의 적정성을 확인할 수 있었다. 또한, 실제 비 내진 철근콘크리트 학교 건축물에 철골가새를 적용시켜 가새- 높이비에 따른 비선형정적해석을 수행하여 내진 성능을 검토하였다. 그 결과, 가새- 높이비 0.3에서 부재의 붕괴가 없는 적절한 내진효과를 보이고 있다. 가새 높이의 증가는 최대전단력과 인명안전 수준의 성능점에서 최대 하중을 증가시키는 효과를 나타내고 있으나, 횡강성의 증가로 인한 가새 골조 주변 부재의 붕괴가 발생하므로, 적정한 가새 높이에 따른 내진 보강이 필요하다는 것을 알 수 있었다. 따라서, 기존 학교건축물의 가새 골조의 내진보강 설계에 있어서 가새 높이에 따른 보강해석을 고려한 후 가새 높이를 선정하고 적절한 보강 개수와 보강위치를 정하는 것이 필요한 것으로 사료된다.

• Steel and Composite Structures
• /
• 제30권4호
• /
• pp.365-382
• /
• 2019

In steel frame-tube structures (SFTSs) the application of flexural beam is not suitable for the beam with span-to-depth ratio lower than five because the plastic hinges at beam-ends can not be developed properly. This can lead to lower ductility and energy dissipation capacity of the SFTS. To address this problem, a replaceable shear link, acting as a ductile fuse at the mid length of deep beams, is proposed. SFTS with replaceable shear links (SFTS-RSLs) dissipate seismic energy through shear deformation of the link. In order to evaluate this proposal, buildings were designed to compare the seismic performance of SFTS-RSLs and SFTSs. Several sub-structures were selected from the design buildings and finite element models (FEMs) were established to study their hysteretic behavior. Static pushover and dynamic analyses were undertaken in comparing seismic performance of the FEMs for each building. The results indicated that the SFTS-RSL and SFTS had similar initial lateral stiffness. Compared with SFTS, SFTS-RSL had lower yield strength and maximum strength, but higher ductility and energy dissipation capacity. During earthquakes, SFTS-RSL had lower interstory drift, maximum base shear force and story shear force compared with the SFTS. Placing a shear link at the beam mid-span did not increase shear lag effects for the structure. The SFTS-RSL concentrates plasticity on the shear link. Other structural components remain elastic during seismic loading. It is expected that the SFTS-RSL will be a reliable dual resistant system. It offers the benefit of being able to repair the structure by replacing damaged shear links after earthquakes.

• Steel and Composite Structures
• /
• 제15권5호
• /
• pp.519-538
• /
• 2013

The design optimization of a cold-formed steel portal frame building is considered in this paper. The proposed genetic algorithm (GA) optimizer considers both topology (i.e., frame spacing and pitch) and cross-sectional sizes of the main structural members as the decision variables. Previous GAs in the literature were characterized by poor convergence, including slow progress, that usually results in excessive computation times and/or frequent failure to achieve an optimal or near-optimal solution. This is the main issue addressed in this paper. In an effort to improve the performance of the conventional GA, a niching strategy is presented that is shown to be an effective means of enhancing the dissimilarity of the solutions in each generation of the GA. Thus, population diversity is maintained and premature convergence is reduced significantly. Through benchmark examples, it is shown that the efficient GA proposed generates optimal solutions more consistently. A parametric study was carried out, and the results included. They show significant variation in the optimal topology in terms of pitch and frame spacing for a range of typical column heights. They also show that the optimized design achieved large savings based on the cost of the main structural elements; the inclusion of knee braces at the eaves yield further savings in cost, that are significant.

• 한국지진공학회논문집
• /
• 제16권1호
• /
• pp.47-59
• /
• 2012

본 연구에서는 학교건물에서 나타나는 전형적인 조적조 채움벽 골조의 내진성능을 등가 스트럿 모델을 통해 평가하였다. 순수골조모델, 중심스트럿모델 및 편심스트럿모델의 세 가지 모형화 방법을 채택하였고, 문헌상으로 얻을 수 있는 범위의 스트럿 강성과 강도를 적용하여 거동특성의 차이를 분석하였다. 역량스펙트럼에 의해 산정된 성능점에서의 변위 및 손상정도에 큰 차이가 나타났으며, 채움벽은 순수골조모델과 비교할 때 중심스트럿모델에서는 유리하게, 편심스트럿모델에서는 불리하게 작용하는 것으로 나타났다. 최종극한변위에서의 거동 또한 모형화 방법 및 재료 속성에 따라서 최대강도, 층간변위, 파괴된 부재 수 및 위치 등에 큰 차이가 나타났다.

• Structural Engineering and Mechanics
• /
• 제16권2호
• /
• pp.127-139
• /
• 2003

Reinforced concrete buildings with shearwalls are very efficient to resist earthquake disturbances. In general, reinforced concrete frames are governed by flexure and shearwalls are governed by shear. If a structure included both frames and shearwalls, it is generally governed by shearwalls. However, the ductility of ordinary reinforced concrete is very limited. To improve the ductility, a series of tests on framed shearwalls made of corrugated steel was performed previously and the experimental results were compared with ordinary reinforced concrete frames and shearwalls. It was found that ductility of framed shearwalls could be greatly improved if the thickness of the corrugated steel wall is appropriate to the surrounding reinforced concrete frame. In this paper, an analytical model is developed to predict the horizontal load-displacement relationship of hybrid reinforced concrete frame-steel wall systems according to the analogy of truss models. This analytical model is based on equilibrium and compatibility conditions as well as constitutive laws of corrugated steel. The analytical predictions are compared with the results of tests reported in the previous paper. It is found that proposed analytical model can predict the test results with acceptable accuracy.

• Earthquakes and Structures
• /
• 제18권5호
• /
• pp.555-565
• /
• 2020

The main objective of seismic codes is to prevent structural collapse and ensure life safety. Collapse probability of a structure is usually assessed by making a series of analytical model assumptions. This paper investigates the effect of finite element modeling (FEM) assumptions on the estimated collapse capacity of a reinforced concrete (RC) frame building and points out the modeling limitations. Widely used element formulations and hysteresis models are considered in the analysis. A full-scale, three-story RC frame building was utilized as the experimental model. Alternative finite element models are established by adopting a range of different modeling strategies. Using each model, the collapse capacity of the structure is evaluated via Incremental Dynamic Analysis (IDA). Results indicate that the analytically estimated collapse capacities are significantly sensitive to the utilized modeling approaches. Furthermore, results also show that models that represent stiffness degradation lead to a better correlation between the actual and analytical responses. Results of this study are expected to be useful for in developing proper models for assessing the collapse probability of RC frame structures.

• 콘크리트학회논문집
• /
• 제12권6호
• /
• pp.119-126
• /
• 2000

Reinforced concrete structural walls are widely known to provide an efficient lateral load resistance and drift control. However, many reported researches on them are mostly limited to the RC structural walls reinforced according to seismic details. When the pushover analysis technique is used for the prediction of inelastic behavior of frame-wall structures for the seismic evaluation of existing buildings having non-seismic details, the reliability of this analysis method should be checked by the test results. The objective of this study is to verify the correlation between the experimental and analytical responses of a high-rise reinforced concrete frame-wall structure having non-seismic details by using DRAIN-2DX program[11] and the test results performed previously[1]. It is concluded that the behavior of the frame-wall model is mainly affected by the fixed-end rotation(uplift at base) and bending deformation of the wall and that the analysis with the LINKS model[10] in DRAIN-2DX describes them with good reliability.

• 한국지진공학회논문집
• /
• 제16권6호
• /
• pp.1-12
• /
• 2012

The researches related to active control systems utilizing superelastic shape memory alloys (SMA) have been recently conducted to reduce critical damage due to lateral deformation after severe earthquakes. Although Superelastic SMAs undergo considerable inelastic deformation, they can return to original conditions without heat treatment only after stress removal. We can expect the mitigation of residual deformation owing to inherent recentering characteristics when these smart materials are installed at the part where large deformation is likely to occur. Therefore, the primary purpose of this research is to develop concentrically braced frames (CBFs) with superelastic SMA bracing systems and to evaluate the seismic performance of such frame structures. In order to investigate the inter-story drift response of CBF structures, 3- and 6-story buildings were design according to current design specifications, and then nonlinear time-history analyses were performed on numerical 2D frame models. Based on the numerical analysis results, it can be comparatively verified that the CBFs with superelastic SMA bracing systems have more structural advantages in terms of energy dissipation and recentering behavior than those with conventional steel bracing systems.