• Journal of the Korean Society of Visualization
• /
• v.15 no.1
• /
• pp.11-18
• /
• 2017

A two-phase flow observed in a heat exchanger or nuclear power generation often has a profound effect on undesirable noise or flow characteristics. Void fraction, which refers to the ratio of gas (or liquid) to the total fluid, affects heat transfer coefficient, vibration and so forth. In other words, void fraction is one of most important parameters in two-phase flow since it contributes to comprehend the characteristics of two-phase flow. We developed a two-phase flow visualization system to measure cross-sectional and volumetric void fractions by using quick closing valves and image processing software. With this system, we could observe the plug, slug, and stratified flow patterns of two-phase flow and measure a myriad of void fractions. As a consequence of the experiment, we found that the estimated void fractions were largely coincident with the predictive values by Chisholm model.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.9
• /
• pp.2782-2791
• /
• 1996

The effective longitudinal shear modulus(LSM) of continuous composites is studied theoretically and numerically using 3-phase unit cell model. Circular, hexagonal and rectangular shapes of reinforced fiber are considered to predict the shear modulus as a function of elastic modulus of each phase and volume fraction of interphase and reinforced fiber. It is found that rectangular fiber shape in low fiber volume fraction($v_f$<30%) and circular fiber shape in high volume fraction($v_f$>40%) shows the higher longitudinal shear modulus. Also the obtained values of LSM for rectangular array and by numerical analysis are higher than those of hexagonal array and by theoretical analysis respectively. The reinforcing effects of interphase are more significant in cases of higher fiber volume fraction and circular fiber shape. Not only the spatial distribution and shape of reinforcing fiber but also the volume of interphase have a pronounced effects on the overall LSM. It is also found that the tangent moduous of 2-and 3-phase polymer matrix composites is insensitive to the shape and distribution of reinforcing fibers.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.13 no.4
• /
• pp.444-450
• /
• 1984

Effects of muscle extracts of five species of fish and shell-fish, mackerel, jack mackerel, yellow corvenia, shrimp and baby-neck clam, on lipid oxidation were investigated using a model system consisting of methyl linoleate absorbed in micro crystalline cellulose and extracts of fishes. Ethanol extracts of both mackerel and jack mackerel apparently showed inhibitory effect on the oxidation of methyl linoleate, while the extract of yellow corvenia, and baby-neck clam showed a slight catalyzed effect on contrary. The ethanol extract of shrimp, however, revealed no effect on the oxidation of methyl linoleate. When the ethanol extracts were dialyzed, the outer fractions of dark fleshed fish had a strong inhibitory effect on the oxidation of methyl linoleate, while the inner fractions did not. The outer fraction of yellow corvenia showed catalyzed effect, but the inner fraction inhibited the oxidation slightly. The outer fraction of shrimp had a strong inhibitory action, but the inner fraction showed no effect. The methanol-water fraction of chloroform-methanol extract of shrimp showed a quite strong inhibitory effect on the oxidation, whereas that of four other samples did the same levels of effect as ethanol extracts.

• Nuclear Engineering and Technology
• /
• v.31 no.1
• /
• pp.29-48
• /
• 1999

Local two-phase flow parameters of subcooled flow boiling in inclined annulus were measured to investigate the effect of inclination on the internal flow structure. Two-conductivity probe technique was applied to measure local gas phasic parameters, including void fraction, vapor bubble frequency, chord length, vapor bubble velocity and interfacial area concentration. Local liquid velocity was measured by Pilot tube. Experiments were conducted for three angles of inclination; 0$^{\circ}$(vertical), 30$^{\circ}$, 60$^{\circ}$. The system pressure was maintained at atmospheric pressure. The range of average void fraction was up to 10% and the average liquid superficial velocities were less than 1.3 m/sec. The results of experiments showed that the distributions of two-phase How parameters were influenced by the angle of channel inclination. Especially, the void fraction and chord length distributions were strongly affected by the increase of inclination angle, and flow pattern transition to slug flow was observed depending on the How conditions. The profiles of vapor velocity, liquid velocity and interfacial area concentration were found to be affected by the non-symmetric bubble size distribution in inclined channel. Using the measured distributions of local phasic parameters, an analysis for predicting average void fraction was performed based on the drift flux model and flowing volumetric concentration. And it was demonstrated that the average void fraction can be more appropriately presented in terms of flowing volumetric concentration.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.32 no.6
• /
• pp.429-445
• /
• 2008

Two-phase compressible flow fields of air-water are investigated numerically in the fixed Eulerian grid framework. The phase interface is captured via volume fractions of each phase. A way to model two phase compressible flows as a single phase one is found based on an equivalent equation of states of Tait's type for a multiphase cell. The equivalent single phase field is discretized using the Roe‘s approximate Riemann solver. Two approaches are tried to suppress the pressure oscillation phenomena at the phase interface, a passive advection of volume fraction and a direct pressure relaxation with the compressible form of volume fraction equation. The direct pressure equalizing method suppresses pressure oscillation successfully and generates sharp discontinuities, transmitting and reflecting acoustic waves naturally at the phase interface. In discretizing the compressible form of volume fraction equation, phase interfaces are geometrically reconstructed to minimize the numerical diffusion of volume fraction and relevant variables. The motion of a projectile in a water-filled tube which is fired by the release of highly pressurized air is simulated presuming the flow field as a two dimensional one, and several design factors affecting the projectile movement are investigated.

• Korean Journal of Pharmacognosy
• /
• v.52 no.2
• /
• pp.105-111
• /
• 2021

To investigate the antioxidant activities of Pinus densiflora needle (Pinaceae), which is widely used as a traditional medicine in Korea, Caenorhabditis elegans model system was used. The n-butanol fraction of P. densiflora needle methanol extract showed the most potent DPPH radical scavenging and superoxide quenching activities in a dose-dependent manner. The n-butanol fraction was measured for the activities of superoxide dismutase (SOD), catalase, and oxidative stress tolerance by using C. elegans with reactive oxygen species (ROS) level. In addition, to see that the regulation of the stress response gene is responsible for the increased stress tolerance of C. elegans treated by the butanol extract, SOD-3 expression was measured using a transgenic strain. As a result, the P. densiflora needle n-butanol fraction increased SOD and catalase activities, and decreased ROS accumulation, dose-dependently. Furthermore, the n-butanol fraction-treated CF1553 worm showed higher SOD-3::GFP intensity than the control.

• Korean Journal of Pharmacognosy
• /
• v.50 no.2
• /
• pp.96-101
• /
• 2019

Methanol extract of Helianthus tuberosus L. (Compositae) flower was investigated to research the anti-oxidative activity by using a Caenorhabditis elegans model system. Ethyl acetate soluble fraction of the methanol extract showed the most potent DPPH radical scavenging activity. The ethyl acetate fraction was measured on its activities of superoxide dismutase (SOD), catalase, and oxidative stress tolerance with reactive oxygen species (ROS) level in C. elegans. Furthermore, in order to verify if regulation of stress-response gene is responsible for the increased stress tolerance of C. elegans which treated by the ethyl acetate fraction, we checked SOD-3 expression using a transgenic strain. Consequently, the ethyl acetate fraction of H. tuberosus flower increased the catalase and SOD activities in a dose-dependent manner in C. elegans, reduced ROS accumulation dose-dependently. Besides, the ethyl acetate fraction-treated CF1553 worms showed higher SOD-3::GFP intensity than the control group.

• Korean Journal of Pharmacognosy
• /
• v.49 no.4
• /
• pp.322-327
• /
• 2018

Methanol extract of Salvia miltiorrhiza Bunge (Labiatae) root was investigated to research the anti-oxidative activity, by using a Caenorhabditis elegans model system. The methanol extract of this plant showed significant DPPH radical scavenging and superoxide quenching activities. Ethyl acetate soluble fraction of the methanol extract that showed the most potent DPPH radical scavenging and superoxide quenching activities. The ethyl acetate fraction was tested on its activities of superoxide dismutase (SOD), catalase, and oxidative stress tolerance in C. elegans. Furthermore, in order to see if regulation of stress-response genes is responsible for the increased stress tolerance of the ethyl acetate fraction treated C. elegans, we checked SOD-3 expression using a transgenic strain. Consequently, the ethyl acetate fraction of S. miltiorrhiza root increased the catalase and SOD activities in a dose-dependent manner in C. elegans. Besides, the ethyl acetate fraction-treated CF1553 worms showed higher SOD-3::GFP intensity than the non-treated ones.

• Computers and Concrete
• /
• v.34 no.3
• /
• pp.367-378
• /
• 2024

This study evaluates the direct tensile strength of ultra-high-performance concrete (UHPC) using tests. A total of 45 dogbone-shaped specimens are tested, with the test variables being the fiber volume fraction and notch length. The test results showed that the material properties of UHPC were largely dependent on the fiber volume fraction and compressive strength. When steel fibers with more than 1% fiber volume fraction are mixed in the manufacturing of UHPC, the tensile strength can be more than twice that of plain UHPC. In addition, the incorporation of steel fibers enabled the significant improvement of the initial cracking strength. However, the effect of the notch length on the tensile behavior was insignificant. An assessment of the direct tensile strength is conducted using machine-learning algorithms (ML). For evaluation of the direct tensile strength of UHPC using ML, a total of 98 test data, including 53 data from other research works and 45 data from this experimental program, were collected. In total, 67 data with a 70% confidence interval on a normal distribution curve were selected, with 47 data among 67 used for ML training and 20 data used for ML testing. As a result, the machine-learning algorithm with a steel fiber volume fraction predicted that the tensile strength has an average of 0.98 and the lowest values of regression evaluation metrics among analytical and ML-based models. It is considered that an ML-based model can help to predict a more accurate tensile strength of UHPC.

• Journal of computational fluids engineering
• /
• v.15 no.3
• /
• pp.24-31
• /
• 2010

boiling flow in vertical tube. The multiphase flow model used in this CFD analysis is the two-fluid model in which liquid(water) and gas(vapour) are considered as continuous and dispersed fluids, respectively. A wall boiling model is also used to simulate the subcooled boiling heat transfer at the heated wall boundary. The diameter and heated length of tube are 0.0154 m and 2 m, respectively. The system pressure in tube is 4.5 MPa and the inlet subcooling is 60 K. The near-wall grid size in the non-dimensional wall unit for lqiuid phase ($y^+_{w,l}$) was examined from 101 to 313 at the outlet boundary. The CFD calculations predicted the void distributions as well as the liquid and wall temperatures in tube. The predicted axial variations of the void fraction and the wall temperature are compared with the measured ones. The CFD prediction of the wall temperature is shown to slightly depend on the near-wall grid size but the axial void prediction has somewhat large dependency. The CFD prediction was found to show a better agreement with the measured one for the large near-wall grid, e.g., $y^+_{w,l}$ > 300 at the tube exit.