• 한국주조공학회지
• /
• 제15권2호
• /
• pp.184-193
• /
• 1995

Effects of process parameters during thixocasting, such as solid volume fraction, mold temperature and extrusion ratio, on the mold filling behaviour and fluidity of Mg alloy(AZ91D) have been investigated. The semi-solid ingot held for 60 minutes at the semi-solid temperature range did not contain the equilibrium volume fraction of solid as expected from the phase diagram. Therefore, in order to obtain the desired solid fractions, and to suppress the exaggerated grain growth during heating, it was required to heat the ingot rapidly up to the temperature $10^{\circ}C$ higher than the semi-solid temperature suggested from the phase diagram for a specific volume fraction of solid. The experimental results show that mold filling behaviour and fluidity can be improved with the use of the higher mold temperature and the lower volume fraction of solid, but remain nearly unaffected by the change of extrusion ratio.

• Computers and Concrete
• /
• 제13권3호
• /
• pp.309-323
• /
• 2014

Based on the compositions and structures of cement-based materials, the geometrical models of the tortuosity of transport paths in hardened cement pastes, mortar and concrete, which are associated with the capillary porosity, cement hydration degree, mixture particle shape, aggregate volume fraction and water-cement ratio, are established by using a geometric approach. Numerical simulations are carried out to investigate the effects of material parameters such as water-cement ratio, volume fraction of the mixtures, shape and size of aggregates and cement hydration degree, on the tortuosity of transport paths in hardened cement pastes, mortar and concrete. Results indicate that the transport tortuosity in cement-based materials decreases with the increasing of water-cement ratio, and increases with the cement hydration degree, the volume fraction of cement and aggregate, the shape factor and diameter of aggregates, and the material parameters related to cement pastes, such as the water-cement ratio, cement hydration degree and cement volume fraction, are the primary factors that influence the transport tortuosity of cement-based materials.

• 한국전기전자재료학회논문지
• /
• 제34권4호
• /
• pp.246-250
• /
• 2021

TFTs technologies with as high mobility as possible is essential for high-performance large displays. TFTs using nanocrystalline silicon thin films can achieve higher mobility. In this work, the change of the crystalline volume fraction at different hydrogen dilution ratios was investigated by depositing nc-Si:H thin films using PECVD. It was observed that increasing hydrogen dilution ratio increased not only the crystalline volume fraction but also the crystallite size. The thin films with a high crystalline volume fraction (55%) and a low defect density (10¹⁷ cm^-3·eV^-1) were used as top gate TFTs channel layer, leading to a high mobility (55 cm²/V·s). We suggest that TFTs of high mobility to meet the need of display industries can be benefited by the formation of thin film with high crystalline volume fraction as well as low defect density as a channel layer.

• Journal of Ginseng Research
• /
• 제19권2호
• /
• pp.108-113
• /
• 1995

Effect of ginseng polysaccharide fraction was examined for $CCl_4$-induced hepatotoxicity in vitro and in vivo. In $CCl_4$-injured primary cultured rat hepatocytes, treatment of the polysaccharide fraction (0.1, 0.3, 1.0 mg/ml) significantly Inhibited the release of LDH and GOT into the culture medium in a dose-dependent manner. Oral administration of the polysaccharide fraction (100, 200 mg/kg) inhibited the decrease of body weight and the increase of the ratio of liver to body weight in $CCl_4$-intoxicated rats. Elevation of GOT, GPT and ALP activity in the serum by $CCl_4$-induced hepatotoxicity was suppressed by administration of ginseng polysaccharide fraction. MDA levels increased in the serum as well as in the liver tissue by treatment with $CCl_4$ showed a tendency to be 연w in the rats given to the polysaccharide fraction. These results suggest that the polysaccharide fraction may be active substance responsible for antihepatotoxic effect of Panax ginseng.

• 대한수의학회지
• /
• 제14권1호
• /
• pp.29-31
• /
• 1974

The total serum protein, protein fractions by paper electrophoresis and A/G ratio in pregnant rabbits were observed. The results obtained in this work were sumrnerized as follows: 1. Total serum protein and the fraction of serum albumin revealed a decrease with the advancing of gestation, especially total serum protein was decreased significantly on 3 weeks of pregnancy. There was a tendency to return tward control level on one week after delivery. 2. The fraction of ${\alpha}_1$, and ${\alpha}_2$-globulin showed little changes during the period of gestation. 3. The fraction of ${\beta}$-globulin was increased more or less during the period of gestation, and on one week after delivery showed considerable increase but the increase was statistically insignificant. 4. The fraction of ${\gamma}$-globulin revealed a variable changes during pregnancy but there was no significant differences. 5. A/G ratio was significantly decreased at 3 weeks of pregnancy and the ratio was near control level on one week after delivery.

• Advances in nano research
• /
• 제10권2호
• /
• pp.129-138
• /
• 2021

In present article, utilizing the Love shell theory with volume fraction laws for the cylindrical shells vibrations provides a governing equation for the distribution of material composition of material. Isotopic materials are the constituents of these rings. The position of a ring support has been taken along the radial direction. The Rayleigh-Ritz method with three different fraction laws gives birth to the shell frequency equation. Moreover, the effect of height- and length-to-radius ratio and angular speed is investigated. The results are depicted for circumferential wave number, length- and height-radius ratios with three laws. It is found that the backward and forward frequencies of exponential fraction law are sandwich between polynomial and trigonometric laws. It is examined that the backward and forward frequencies increase and decrease on increasing the ratio of height- and length-to-radius ratio. As the position of ring is enhanced for clamped simply supported and simply supported-simply supported boundary conditions, the frequencies go up. At mid-point, all the frequencies are higher and after that the frequencies decreases. The frequencies are same at initial and final stage and rust itself a bell shape. The shell is stabilized by ring supports to increase the stiffness and strength. Comparison is made for non-rotating and rotating cylindrical shell for the efficiency of the model. The results generated by computer software MATLAB.

• 한국농공학회논문집
• /
• 제52권4호
• /
• pp.73-81
• /
• 2010

The cemented sand and gravel (CSG) method is a construction technique that adds cement and water to rock-like materials, such as rivered gravel or excavation muck which can be obtained easily at areas adjacent to dam sites. This study was performed to evaluate the compaction and compressive strength properties of stress-strain, elastic modulus and fracture mode CSG materials reinforced polypropylene fiber. Polypropylene fiber widely used for concrete reinforcement is randomly distributed into cemented sand. The two types of polypropylene fiber (monofillament and fibrillated fiber) were used and fiber fraction ratio was 0, 0.2 %, 0.4 %, 0.6 % and 0.8 % by the weight of total dry soil. The effect of fiber fraction ratio and fiber shape on compaction and compressive strength were investigated. The optimum moisture contents (OMC) of CSG material increased as fiber fraction increased and the dry density of CSG material decreased as fiber fraction. Also, the maximum increase in compressive strength was obtained at 0.4 % content of monofillament and fibrillated fiber. CSG material behaviour was controlled not only by fiber fraction but also fiber distribution, fiber shape and fiber type.

• 유기물자원화
• /
• 제22권3호
• /
• pp.41-52
• /
• 2014

본 연구에서는 부정기적 발생 오수의 생분해도 특성 parameters를 현장 시료채취 및 분석실험을 실시하여 조사 및 분석하였으며 결과는 다음과 같다. TCODcr (Total CODcr)의 1,2차 평균 농도는 325.5 mg/L 이며 TCOD 분율은 100% 로 분석되었다. SCODcr (Soluble CODcr)의 1,2차 평균 농도 는 135.9 mg/L 이며 TCOD 분율은 41.8% 로 분석되었다. Ss (Readily biodegradable substrate)의 1,2차 평균 농도는 74.1 mg/L 이며 TCOD 분율은 22.8% 이다. $S_I$ (Soluble inert non-biodegradable substrate)의 1,2차 평균 농도는 61.8 mg/L 이며 TCOD 분율은 19.0% 이다. Xs(Slowly Biodegradable Substrate)의 1,2차 평균 농도는 27.8 mg/L 이며 TCOD 분율은 8.5% 이다. $X_H$의 1,2차 평균 농도는 103.4 mg/L 이며 TCOD 분율은 31.8% 이다. $X_I$ (Particulate inert non-biodegradable substrate)의 1,2차 평균 농도는 58.5 mg/L 이며 TCOD 분율은 18.0% 이다. 따라서 대상 시료의 용존성 생분해 가능 유기물질은 41.8%로 분석되었으며, 이중 생분해가 용이한 분율은 22.8%로 나타났다. 이와 같이 부정기적인 유입 유량으로 인한 유량조정 또는 균등조의 운전으로 유입부하 변동폭에 대한 영향은 크지 않을 것으로 판단된다.

• 콘크리트학회논문집
• /
• 제16권6호
• /
• pp.759-766
• /
• 2004

강섬유(steel fiber) 보강은 전단 강도와 같은 콘크리트 구조 부재의 많은 공학적 특성들을 현저히 향상시킨다. 본 연구는 구조 부재로의 실용적 사용을 위해 강섬유의 형상, 형상비, 혼입률, 강섬유 계수를 강도 특성 및 변형 특성의 수준으로 평가하였다. 기존 연구 및 본 연구의 재료 시험 결과들을 평가한 결과, 양단고리형 및 최대골재치수의 1.5배 이상되는 길이의 강섬유의 강도 보강효과가 우수한 것으로 판단된다. 또한 강도 및 변형 능력에 대한 상세 시험결과로부터, 형상비 75, 혼입률 $1.5\%$가 적절한 것으로 판단된다. 결론적으로 재료 성능 시험 결과들을 통계적로부터 추정한 결과, 강섬유 계수, 할렬인장강도, 휨강도가 SFRC의 주요한 특성인자로 판단된다.

• 한국공작기계학회논문집
• /
• 제12권4호
• /
• pp.63-69
• /
• 2003

In discontinuous composite mechanics, shear lag theory is one of the most popular model because of its simplicity and accuracy. However, it does not provide sufficiently accurate strengthening predictions in elastic regime then the fiber aspect ratio is small. This is due to its neglect of stress transfer across the fiber ends and the stress concentrations that exist in the matrix regions near the fiber ends. To overcome this shortcoming, a more simplified shear lag model introducing the stress concentration factor which is a function of several variables, such as the modulus ratio, the fiber volume fraction, the fiber aspect ratio, is proposed. It is found that the modulus ratio($E_f$/$E_m$) is the essential variable among them. Thus, the stress concentration factor is expressed as a function of modulus ratio in the derivation. It is found that the proposed model gives a good agreement with finite element results and has the capability to correctly predict the values of interfacial shear stresses and local stress variations in the small fiber aspect ratio regime.