• 대한기계학회논문집B
• /
• 제22권4호
• /
• pp.468-480
• /
• 1998

The temporal and spatial distributions of soot volume fractions were measured for single toluene droplet flames as a function of pressure under the normal-gravity condition. In order to characterize the transient nature of the flame and sooting regions, a full-field light extinction and subsequent tomographic inversion technique was used. The reduction in sooting as a function of pressure was assessed by comparison of the maximum soot volume fractions at several vertical positions along the axis above the droplet. The maximum soot volume fraction was reduced by 70% when the pressure was reduced by 60% from 1 atm to 0.4 atm. The reduction in sooting is attributed to variation of the geometric configuration of flame which reduces the system Grashof number as well as only the change in the adiabatic flame temperature as the pressure decreases. The gravimetrically-measured total soot yield was also compared to the optically-measured soot volume fraction to obtain a correlation between the two measurements. As a result, the total soot yield was linearly proportional to the optically-measured maximum soot volume fraction and linearly reduced as the pressure decreased. Accordingly, the non-intrusive full-field light extinction-measurements were able to be calibrated not only to measure soot volume fraction, but to simultaneously evaluate the total soot yield emitted from the toluene droplet flame (which is useful in the practical application).

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1579-1587
• /
• 2022

The effects of hydride amount (20-850 wppm), orientation (circumferential and radial), and temperature (room temperature, 100 ℃, 200 ℃) on the axial mechanical properties of Zircaloy-4 cladding were comprehensively examined. The fraction of radial hydride fraction in the cladding was quantified using PROPHET, an in-house radial hydride fraction analysis code. Uniaxial tensile tests (UTTs) were conducted at various temperatures to obtain the axial mechanical properties. Hydride orientation has a limited effect on the axial mechanical behavior of hydrided Zircaloy-4 cladding. Ultimate tensile stress (UTS) and associated uniform elongation demonstrated limited sensitivity to hydride content under UTT. Statistical uncertainty of UTS was found small, supporting the deterministic approach for the load-failure analysis of hydrided Zircaloy-4 cladding. These properties notably decrease with increasing temperature in the tested range. The dependence of yield strength on hydrogen content differed from temperature to temperature. The ductility-related parameters, such as total elongation, strain energy density (SED), and offset strain decrease with increasing hydride contents. The abrupt loss of ductility in UTT was found at ~700 wppm. Demonstrating a strong correlation between total elongation and offset strain, SED can be used as a comprehensive measure of ductility of hydrided zirconium alloy.

• 대한본초학회지
• /
• 제26권2호
• /
• pp.1-10
• /
• 2011

Objective ： Lonicera japonica contains anti complementary polysaccharides and polyphenolic compound. Among these polyphenolic substances, chlorogenic acid is the major active component of this plant. However, the immunological mechanisms for these activities, have not been elucidated, nor the active components. To clarify immunomodulatory effects of those we examined the relationship between the activity of CD8+ T cell-mediated lysis and the frequency of cytokine profiles in spleen, thymus (especially IFN-${\gamma}$, IL-4, GM-CSF etc.) expressing CD8+ T cells activated by IL-2. Methods : To study immunomodulatory effects ethyl acetate fraction from Lonicera japonica, chlorogenic acid on cytokine gene expression from spleen, thymus cells, RT-PCR was performed after quantitative normalization for each gene by a densitometry using ${\beta}$-actin gene expression. A modified standard $^{51}Cr$-release assay was used to measure cytotoxic activities of cytotoxic T cells. Spleen, thymus cells from NOD mice were stained with CD3, CD4, CD44, CD69 in staining buffer and analyzed by two color flow cytometry. Results : We showed that ethyl acetate fraction from Lonicera japonica in combination with IL-2 resulted in a significant enhancement of PCR products for IFN-${\gamma}$, IL-4, IL-10, GM-CSF, IL-6 and cytotoxtic CD8+ T cell proportion in spleen and thymus T cells in NOD mice. This suggests that IFN-${\gamma}$, IL-6 like IL-4 may be acting as a regulatory rather than proinflammatory cytokine. Conclusions : In conclusion, based on the results of the present study which showed that ethyl acetate fraction from Lonicera japonica and chlorogenic acid upregulating cytokine gene expression in spleen and thymus, we are tempted to speculate that some of the therapeutic efficacies such as anti-diabetic activity of Lonicera japonica are due to the immunomodulatory its ethylacetate fraction and chlorogenic acid.

• 천문학회보
• /
• 제46권2호
• /
• pp.72.1-72.1
• /
• 2021

Galaxy mergers are known to have been one of the main drivers in galaxy evolution in a wide range of environments. However, in galaxy clusters, high-speed encounters have been believed to undermine the role of mergers as a driver in galaxy evolution. Nonetheless, a high fraction (~38% in Sheen et al. 2012 and ~20% in Oh et al. 2018) of galaxies with post-merging features have been reported in deep (>~28 mag/arcsec2) optical surveys of cluster galaxies. The authors argue that these galaxies could have merged outside of the cluster and, later, fallen into the cluster, sustaining their long-lasting post-merging features. On the other hand, when galaxy clusters interact, galaxy orbits might be destabilized resulting in a higher galaxy merger rate. To test this idea, we measure the ongoing-merger fraction of galaxies in deep DECam mosaic data of seven Abell clusters (A754, A2399, A2670, A3558, A3574, A3659 and A3716) with a variety of dynamical states (0.016

• 한국연초학회지
• /
• 제29권1호
• /
• pp.23-29
• /
• 2007

The measurement of physical properties such as apparent density and void fraction of tobacco materials, which is so bulky, is a main theme with regard to tobacco process, quality control, cigarette combustion and smoke generation. Except Solution Impregnation Method, there was no alternative method for measuring those properties in the porous material so far. However, experimental processes of that method are so complicated as to cost much time and labor, the main solution such as mercury to apply to the method is usually very hazard. Therefore, we had developed a new method to determine them easily in our other paper by the mathematical equations derived from the Ergun equation for the purpose of it, and then already evaluated our method through applying some basic data from Muramatsu et at. (1979) with regard to our developed equations. Then, we found our method best fit to experimental one (Oh et al., 2001). In this study we tried to establish our method to conveniently determine those physical properties. Especially, we have focused on the development the easy way to measure surface area and the volume of single shred in a tobacco column. As a result of that, we found that the computer image analyzer was best fit for it. Then, we have finally determined apparent density and void fraction for our domestic tobacco shred.

• Composites Research
• /
• 제15권5호
• /
• pp.27-34
• /
• 2002

본 연구의 목적은 (주)한국와이바의 CF3327 평직 복합재료의 열전도도를 실험적으로 계측하고 이를 이론적인 예측과 비교하는데 있다. 열전도도 계측을 위하여 비교계측법의 원리를 이용한 실험 장치를 제작하였으며 열전도도가 잘 알려진 그라파이트를 실험함으로써 장비의 정확성을 확인하였다. 미시역학적인 방법은 섬유 및 기지의 물성, 섬유체적비, 직조 형태 등의 변수들이 복합재료의 유효물성치에 미치는 영향을 평가하는데 유용하다. 본 연구에서는 3차원 직-병렬 열저항 개념을 주기적으로 반복되는 평직의 단위구조에 적용하여 열전도도를 예측하였다. 해석 결과를 실험 결과와 비교한 결과 잘 일치함을 확인하였고 섬유체적비가 에폭시 수지 복합재료의 열전도도에 미치는 영향을 고찰하였다.

• Journal of Chest Surgery
• /
• 제21권2호
• /
• pp.223-230
• /
• 1988

Emax, end-systolic pressure-volume relationship, has been established as a new concept which can be representative of ventricular contractility itself since 1970s. Comparing to ejection fraction[EF], Emax is independent of preload and afterload. However Emax has not been proved precisely in non-thoracotomized condition because current methods have limitation in measuring ventricular chamber volume accurately in in viva state. The Dynamic Spatial Reconstructor[DSR], high speed computerized tomography, can measure ventricular chamber volume accurately throughout cardiac cycle in non-thoracotomized state. So Emax and EF of the left ventricle was tried to measure precisely in in vivo condition with DSR. Emax was compared to EF to estimate its ability to evaluate ventricular contractility. 5 mongrel dogs, weighing 15-16kg, were used for measuring Emax and EF of the left ventricle in 3 or 4 different loading conditions using DSR. Emax value in 5 dogs was from 2.62 to 10.49. Each dog has one Emax value regardless of loading conditions. However EF in 5 dogs varies depending on loading conditions. The conclusions are that Emax is useful in in viva state and EF varies depending on loading conditions. So Emax should be tried to use in clinical situation rather than EF because it is always representative of contractility itself regardless loading conditions in in viva state.

• 한국전산유체공학회지
• /
• 제2권2호
• /
• pp.89-96
• /
• 1997

High injection pressure system has been developed as a measure to reduce harmful exhaust gases. In order to understand the effect of pressure on diesel spray injection process, wide range of high injection pressure was tested. The gas phase is modelled by the Eulerian continuum conservation equations of mass, momentum, energy and fuel vapour fraction. The liquid phase is modelled following the discrete droplet model approach in Lagrangian form. The droplet distributions, vapor fractions and gas flows are analyzed in various injection pressure cases. The distributions of spray and vapor increase and the Sauter mean diameter decreases with increasing injection pressure quickly in a low pressure area but slowly in a high pressure area.

• Advances in concrete construction
• /
• 제13권6호
• /
• pp.433-450
• /
• 2022

The conventional disposal methods of waste tires are harmful to the environment. Moreover, the recycling/reuse of waste tires in domestic and industrial applications is limited due to parent product's quality control and environmental concerns. Additionally, the recycling industry often prefers powdered rubber particles (<0.60 mm). However, the processing of waste tires yields both powdered and coarser (>0.60 mm) size fractions. Reprocessing of coarser rubber requires higher energy increasing the product cost. Therefore, the waste tire rubber (WTR) less favored by the recycling industry is encouraged for use in construction products as one of the environment-friendly disposal methods. In this study, WTR fiber >0.60 mm size fraction is collected from the industry and sorted into 0.60-1.18, 1.18-2.36-, and 2.36-4.75-mm sizes. The effects of different fiber size fractions are studied by incorporating it as fine aggregates at 10%, 20%, and 30% in the self-compacting rubberized concrete (SCRC). The experimental investigations are carried out by performing fresh and hardened state tests. As the fresh state tests, the slump-flow, T500, V-funnel, and L-box are performed. As the hardened state tests, the scanning electron microscope, compressive strength, flexural strength and split tensile strength tests are conducted. Also, the water absorption, porosity, and ultrasonic pulse velocity tests are performed to measure durability. Furthermore, SCRC's energy absorption capacity is evaluated using the falling weight impact test. The statistical significance of content and size fraction of WTR fiber on SCRC is evaluated using the analysis of variance (ANOVA). As the general conclusion, implementation of various size fraction WTR fiber as fine aggregate showed potential for producing concrete for construction applications. Thus, use of WTR fiber in concrete is suggested for safe, and feasible waste tire disposal.

• 대한기계학회논문집B
• /
• 제24권11호
• /
• pp.1447-1456
• /
• 2000

Simulated experiments of high pressure melt ejection(HPME) are performed to measure the released fraction of corium simulant from the French type PWR cavity. The experiments are carried out on a 1/20th linear scaled model of the Ulchin 1&2 cavity. Water or woods metal and nitrogen is used as simulant of molten corium and steam, respectively. Experimental parameters are water mass, annulus area and breach size. It is shown that only breach size effects is very important while the mass and the annulus area do not affect the released fraction. It is found that the liquid film transport is much more dominant mechanism than the entrainment droplet transport, especially in linear scale down simulated HPME experiment.