• 한국주거학회논문집
• /
• 제15권2호
• /
• pp.107-115
• /
• 2004

The objective of this study is to show the system Integrations and control method for operation of the Radiant Floor Cooling. The systems for radiant floor cooling system consist of only using the radiant floor cooling and the radiant floor cooling integrated with a dehumidification system. And the study is suggested control method with composed radiant floor cooling system through simulations. Radiant floor cooling systems compose of four main parts: an existing radiant heating panel, manifold, cooling source and controller, and sensors. If dehumidifying or supplementary cooling is needed, additional equipments such as PAC and AHU are needed. Simulation results show that control method only using radiant floor cooling system can prevent condensation and set room air temperature with the exception of hot and humid periods and control method using the radiant floor cooling integrated with a dehumidification system is comfort thermal environments and can reduce the cooling load quickly, moreover, show comfort control method to meet various cooling operation situations.

• 대한수학회보
• /
• 제37권1호
• /
• pp.181-189
• /
• 2000

Let (X, J) be a closed, connected almost complex four-manifold. Let $X_1$ be the complement of an open disc in X and let ${\varepsilon}_1$be the contact structure on the boundary ${\varepsilon}X_1$ which is compatible with a symplectic structure on $X_1$, Then we show that (X, J) is symplectic if and only if the contact structure ${\varepsilon}_1$ on ${\varepsilon}X_1$ is isomorphic to the standard contact structure on the 3-sphere $S^3$ and ${\varepsilon}X_1$is J-concave. Also we show that there is a contact structure ${\varepsilon}_0\ on\ S^2\times\ S^1$which is not strongly symplectically fillable but symplectically fillable, and that $(S^2{\times}S^1,\;{\varepsilon})$ has infinitely many non-diffeomorphic minimal fillings whose restrictions on$\S^2\times\ S^1$are ${\sigma}$ where ${\sigma}$ is the restriction of the standard symplectic structure on $S^2{\times}D^2$.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.162-169
• /
• 2000

This study was carried out to develop a continuously variable-speed transmission(CVT) for agricultural tractor. A full-toroidal CVT mechanism with four discs and six rollers was selected as a device for changing speed ratio continuously. In the step of system layout design, the sizes of roller cylinders and end-load cylinder, which were critical factors for controlling the variator, were designed. Also the control pressure range was designed to limit the contact pressure of variator. In order to make the maximum speed of vehicle as 30km/h, the planetary gear and the six pairs of gears were designed. Also the hydraulic clutch, silent chain, hydraulic manifold and electronic controller were designed. After the design, a prototype with CVT controller was developed and tested. The speed of vehicle was changed continuously to the speed set by driver and the settling time was about 0.52 second at the step-response test (reduction ratio of variator 2.0 to 1.0), which was acceptable as a response time for working with tractor.

• 한국위성정보통신학회논문지
• /
• 제1권2호
• /
• pp.63-70
• /
• 2006

본 논문에서 2008년에 발사될 통신해양기상 위성탑재용 Ka 대역 멀티플렉서의 인증모델 결과를 보였다. 이들은 위성통신에서 주파수 자원을 효율적으로 사용하기 위한 위성중계기용 입력 및 출력 멀티플렉서와 반사판 안테나를 송수신 대역에서 공용으로 상요하기 위한 급전용 다이플렉서이다. 4개의 주파수채널을 지닌 중계기 입력부에서 사용되는 입력 멀티플렉서는 높은 주파수 선택도 특성을 지닌 협대역 8차 타원형 필터와 2차 군지연등화기를 갖는 독립 채널 필터들로 이루어져 있다. 출력 멀티플렉서는 저손실 특성을 갖고, 무게 및 부피가 적은 매니폴드 형태가 이용되었다. 급전부에 사용되는 다이플렉서의 송수신 포트는 E 평면 T 접합부를 이용하여 분기되었고, 수신부 필터는 튜닝이 용이하도록 비대칭 유도성 아이리스를 이용한 필터가 적용되었다. 제작된 인증모델 멀티플렉서들은 요구 규격에 맞도록 전기적 성능시험, 진동시험, 기계적 충격시험, 열진공 시험, EMC 시험 등이 실시되었고, 시험결과 비행모델에 적용 가능한 성능을 보였다.

• 한국실내디자인학회논문집
• /
• 제3호
• /
• pp.46-57
• /
• 1994

Today, it is a fact that interior design plays a very important role as much as architecture on contributing to our society as a rising new professional field. On the other hand, our interior design education is still in immagture stage unlike the graudal development of the mood of interior design line , If the interior design field has any educational value to invest to be noticed as an environmental design that creates the human environment. There are great deal of meanings to indicate the direction for better education after recognizing the manu different problems on presently offering interior design education. Therefore, the objectives of this study is , after establishing the innovative methods of education and course contents of the four year interior design program, to produce the interior designers of manifold abilities, who is able to fit well in the professional practice, in order to materialize the settlement of interior design education which will be the key point in our circumstances, which has ow social recognition toward interior design. There were four phases in this study. First was to gather and to analyze information from printed materials, such as curriculum and catalog from each institution. Secondly, we had collected existing previous studies in all interior design area in order to sude as references. Thirdly, we have managed to suggest ideal improvement for better basic design program in the area of interior design education after the arranging and analyzing . Finally, we were able to persuade the importance of improved basic design program to the interior design education parties and to suggest the direction for the future. Because interior design as a scholastic pursuit is combined practical application study by the art and technology, it emphasizes specialty . From that reason interior design education must be performed as professional specialist education instead of vocational education. In another words, the ultimate goal of the interior design objectives must be in producing professional specialist.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권3호
• /
• pp.70-78
• /
• 2000

The effects of recirculated exhaust gas on the characteristics of ;$NO_x$ and soot emissions under a wide range of engine load have been experimentally investigated by a water-cooled, four-cylinder, indirect injection, four cycle and marine diesel engine operating at two kinds of engine speeds. The purpose of the present study is to develop the EGR control system for reducing $NO_x$ and soot emissions simultaneously in diesel engines. The EGR system is used to reduce NOx emissions, and a novel diesel soot removal apparatus with a cylinder-type scrubber for the experiment system which has 6 water injectors(A water injector is made up 144 nozzles with 1.0mm in diameter) is specially designed and manufactured to reduce the soot contents in the recirculated exhaust gas to intake system of the engines. The intake oxygen concentration obtained by the intake air flow and the oxygen concentration in the recirculated exhaust gas, and the exhaust oxygen concentration measured in exhaust manifold are used to analyse and discuss the influences of EGR on NOx and soot emissions. The experiments are performed at the fixed fuel injection timing of $15.3^{\circ}$ BTDC regardless of experimental conditions. It is found that $NO_x$ emissions decrease and soot emissions increase owing to the drop of intake oxygen concentration and exhaust oxygen concentration as EGR rate rises. Also, one can conclude that it is sufficient for the scrubber EGR system with a novel diesel soot removal apparatus to reduce $NO_x$ emissions, but not to reduce soot emissions.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 춘계학술대회
• /
• pp.496-499
• /
• 2014

30MeV Cyclotron의 양성자가 Xe-124 기체 표적 시스템에 조사될 때 가능한 핵반응을 적용하여 Xe Gas를 GPM으로부터 Target으로 까지 전송하는 시스템을 설계하고 제작하였다. 시스템 설계는 크게 4파트로 나누어 설계하였다. 각각의 하드웨어 부분은 솔리드웍스를 이용하여 설계하였다. Target은 헬륨으로 Havor Foil을 쿨링시키게 설계했고 물은 타겟에 들어간 Xe Gas를 조사 시 높아지는 온도를 식혀주는 역할을 하게 제작하였고 온도센서와 압력센서를 장착하여 눈으로 확인할 수 있게 제작하였다. GPM(Gas Process Manifold)은 Xe Gas를 운반하도록 준비하는 부분이며 Xe Gas를 담고있는 부분과 불순물을 제거하는 부분이 있다. HCS(Helium Circulation System)은 헬륨을 이용하여 각파트를 클리닝 하고 냉각시켜 준다. 이러한 각 부분들을 PLC로 제어하게 하여 유지보수시의 편리성을 추구하였고 PC Vue를 사용하여 SIEMENS PLC를 더욱더 안전하게 인터페이스하게 하였다.

• 한국측량학회지
• /
• 제29권6호
• /
• pp.593-599
• /
• 2011

지리정보에 대한 사용자의 활용도가 높아지면서 더 새롭고 고품질인 지리정보 자료에 대한 요구 역시 함께 증가하고 있다. 새로운 콘텐츠를 제작하는데 있어 기 구축된 자료간의 융합을 통한 방법은 기존의 자료들이 가진 장점만을 취하여 새로운 지리정보 콘텐츠를 생성할 수 있다는 점에서 효율적이다. 그러나, 서로 다른 자료를 융합하면 위치편차와 형상불일치가 나타나는데 이는 이종의 자료가 가진 정보의 정확도는 그대로 유지한 채 자료 간 불일치되는 부분을 개선하는 합성 기술로 해결이 가능하다. 본 연구에서는 선행연구를 통해 위치편차가 최소화된 도로지도와 항공사진간에 형상불일치를 제거하는 것을 목적으로 하여 항공사진에서 도로 후보 영상을 생성한 후 이를 도로일 가능성으로 표현한 그래프를 제작하였다. 여기서 도로일 가능성이 높은 것만을 추출하여 합성 시 형상불일치를 제거할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.273-273
• /
• 2013

Recently, Point-of-care (POC) testing microdevices enable to do the patient monitoring, drug screening, pathogen detection in the outside of hospital. Immunochromatographic strip (ICS) is one of the diagnostic technologies which are widely applied to POC detection. Relatively low cost, simplicity to use, easy interpretations of the diagnostic results and high stability under any circumstances are representative advantages of POC diagnosis. It would provide colorimetric results more conveniently, if the genetic analysis microsystem incorporates the ICS as a detector part. In this work, we develop a reverse transcriptase-polymerase chain reaction (RT-PCR) microfluidic device integrated with a ROSGENE strip for colorimetric influenza H1N1 virus detection. The integrated RT-PCR- ROSGENE device is consist of four functional units which are a pneumatic micropump for sample loading, 2 ${\mu}L$ volume RT-PCR chamber for target gene amplification, a resistance temperature detector (RTD) electrode for temperature control, and a ROSGENE strip for target gene detection. The device was fabricated by combining four layers: First wafer is for RTD microfabrication, the second wafer is for PCR chamber at the bottom and micropump channel on the top, the third is the monolithic PDMS, and the fourth is the manifold for micropump operation. The RT-PCR was performed with subtype specific forward and reverse primers which were labeled with Texas-red, serving as a fluorescent hapten. A biotin-dUTP was used to insert biotin moieties in the PCR amplicons, during the RT-PCR. The RT-PCR amplicons were loaded in the sample application area, and they were conjugated with Au NP-labeled hapten-antibody. The test band embedded with streptavidins captures the biotin labeled amplicons and we can see violet colorimetric signals if the target gene was amplified with the control line. The off-chip RT-PCR amplicons of the influenza H1N1 virus were analyzed with a ROSGENE strip in comparison with an agarose gel electrophoresis. The intensities of test line was proportional to the template quantity and the detection sensitivity of the strip was better than that of the agarose gel. The test band of the ROSGENE strip could be observed with only 10 copies of a RNA template by the naked eyes. For the on-chip RT-PCR-ROSGENE experiments, a RT-PCR cocktail was injected into the chamber from the inlet reservoir to the waste outlet by the micro-pump actuation. After filling without bubbles inside the chamber, a RT-PCR thermal cycling was executed for 2 hours with all the microvalves closed to isolate the PCR chamber. After thermal cycling, the RT-PCR product was delivered to the attached ROSGENE strip through the outlet reservoir. After dropping 40 ${\mu}L$ of an eluant buffer at the end of the strip, the violet test line was detected as a H1N1 virus indicator, while the negative experiment only revealed a control line and while the positive experiment a control and a test line was appeared.

• 한국운동역학회지
• /
• 제29권3호
• /
• pp.157-166
• /
• 2019

Objective: This study examined the effects of stimulating fingertip temperature on the patterns of force sharing and stability properties during multi-finger force production tasks. Method: 9 adult subjects (male: 3, female: 6, age: $26.11{\pm}4.01yrs$, height: $169.22{\pm}5.97cm$, weight: $61.44{\pm}11.27kg$) participated in this study. The experiment consisted of three blocks: 1) maximal voluntary contraction (MVC) task, 2) single-finger ramp task to quantify enslaving (i.e., unintended force production by non-task fingers), and 3) 12 trials of multi-finger steady-state force production task at 20% MVC. There were three temperature conditions including body-temperature (i.e., control condition), $40^{\circ}C$, and $43^{\circ}C$, and the stimulation was given to the index finger only for all experimental conditions. Results: There were no significant differences in the MVC forces, enslaving, and the accuracy of performance during the steady-state task between the conditions. However, the share of stimulated index finger force increased with the index fingertip temperature, while the share of middle finger force decreased. Also, the coefficient of variation of both index and middle finger forces over repetitive trials increased with the index fingertip temperature. Under the framework of the uncontrolled manifold (UCM) hypothesis used to quantify indices of multi-finger synergies (i.e., stability property) stabilizing total force during the steady-state task, the two variance components within the UCM analysis increased together with the fingertip temperature, while no changes in the synergy indices between the conditions. Conclusion: The current results showed that fingertip temperature stimulation only to index finger does not affect to muscle force production capability of multi-finger, independence of individual fingers, and force production accuracy by the involvement of all four fingers. The effect of fingertip temperature on the sharing pattern and force variation may be due to diffuse reflex effects of the induced afferent activity on alpha-motoneuronal pools. However, the unchanged stability properties may be the reflection of the active error compensation strategies by non-stimulated finger actions.