• 한국자동차공학회논문집
• /
• 제3권3호
• /
• pp.66-78
• /
• 1995

In this paper, we address vehicle modeling and dynamic analysis of four wheel steering systems (4WS). 4WS is one of the devices used for the improvement of vehicle maneuverability and stability. All research done here is based on a production vehicle from a manufacturer. To study actual system response, a three dimensional, full vehicle model was created. In past research of this type, simple, two dimensional, bicycle vehicle models were typically used. First, we modelled and performed a dynamic analysis on a conventional two wheel steering(2WS) vehicle. The modeling and analysis for this model and subsequent 4WS vehicles were performed using ADAMS(Automatic Dynamic Analysis of Mechanical Systems) software. After the original vehicle model was verified with actual experiment results, the rear steering mechanism for the 4WS vehicle was modelled and the rear suspension was changed to McPherson-type forming a four wheel independent suspension system. Three different 4WS systems were analyzed. The first system applied a mechanical linkage between the front and rear steering mechanisms. The second and third systems used, simple control logic based on the speed and yaw rate of the vehicle. 4WS vehicle proved dynamic results through double lane change test.

• 대기
• /
• 제12권2호
• /
• pp.10-12
• /
• 2002

• 천문학회보
• /
• 제3권
• /
• pp.34.2-34.2
• /
• 1978

• Radiation Oncology Journal
• /
• 제31권4호
• /
• pp.247-251
• /
• 2013

Purpose: This study aimed to investigate efficient approaches for determining internal target volume (ITV) from four-dimensional computed tomography (4D CT) images used in stereotactic body radiotherapy (SBRT) for patients with early-stage non-small cell lung cancer (NSCLC). Materials and Methods: 4D CT images were analyzed for 15 patients who received SBRT for stage I NSCLC. Three different ITVs were determined as follows: combining clinical target volume (CTV) from all 10 respiratory phases ($ITV_{10Phases}$); combining CTV from four respiratory phases, including two extreme phases (0% and 50%) plus two intermediate phases (20% and 70%) ($ITV_{4Phases}$); and combining CTV from two extreme phases ($ITV_{2Phases}$). The matching index (MI) of $ITV_{4Phases}$ and $ITV_{2Phases}$ was defined as the ratio of $ITV_{4Phases}$ and $ITV_{2Phases}$, respectively, to the $ITV_{10Phases}$. The tumor motion index (TMI) was defined as the ratio of $ITV_{10Phases}$ to $CTV_{mean}$, which was the mean of 10 CTVs delineated on 10 respiratory phases. Results: The ITVs were significantly different in the order of $ITV_{10Phases}$, $ITV_{4Phases}$, and $ITV_{2Phases}$ (all p < 0.05). The MI of $ITV_{4Phases}$ was significantly higher than that of $ITV_{2Phases}$ (p < 0.001). The MI of $ITV_{4Phases}$ was inversely related to TMI (r = -0.569, p = 0.034). In a subgroup with low TMI (n = 7), $ITV_{4Phases}$ was not statistically different from $ITV_{10Phases}$ (p = 0.192) and its MI was significantly higher than that of $ITV_{2Phases}$ (p = 0.016). Conclusion: The $ITV_{4Phases}$ may be an efficient approach alternative to optimal $ITV_{10Phases}$ in SBRT for early-stage NSCLC with less tumor motion.

• 대한기계학회논문집
• /
• 제16권2호
• /
• pp.336-347
• /
• 1992

The three dimensional inviscid transonic cascade flow was investigated numerically, incorporation a four stage Runge-Kutta integration method proposed by Jameson. Time marching to the steady state was accelerated by using optimum time step and enthalpy damping. In describing the boundary conditions at inlet and outlet, Riemann invariants are considered. By adding a second and a fourth order artificial viscocities, the numerical instability due to the propagation of undamped disturbance or the rapid change of state near the shock has been prevented. The numerical results for are bump cascade, cambered two dimensional turbine cascade and three dimensional stator cascade agreed reasonably well with previous results. It has been known that the accuracy of the solution depended a lot on the modeling of the leading or trailing edge.

• 한국융합학회논문지
• /
• 제4권3호
• /
• pp.27-33
• /
• 2013

기존의 바코드는 정보 배열이 나란히 나열된 선 모양을 가지며 이를 1차원 바코드라 부른다. 이에 반해 2차원 바코드는 점자방식 또는 모자이크방식 코드로 작은 정사각형 도는 직사각형 안에 정보를 표현한다. 2차원 바코드는 기존의 1차원 바코드보다 작은 공간에 많은 데이터를 표현 가능함으로써 보다 효율적인 바코드의 구현이 가능하다. 현재 ISO 국제 표준화된 2차원 바코드는 총 4가지로 분류되는데 QR Code, Data Matrix, PDF417, MaxiCode가 있다. 본 논문에서는 ISO 국제 표준화된 바코드 중 하나인 Data Matrix의 Base 256 모드에 대한 기본 개념, 구성 방법, 인코딩 및 디코딩 방법을 상세히 제안한다. Data Matrix 심벌에 저장된 데이터를 보다 효율적으로 구성하기 위해 숫자, Alphanumeric 문자, 이진법에 따라 다른 인코딩, 디코딩 방법을 사용하게 되는데 본 논문에서는 이를 고려한 디코딩 방법에 초점을 맞춰 기술할 것이다.

• Steel and Composite Structures
• /
• 제22권2호
• /
• pp.399-409
• /
• 2016

The fracture propagation mechanism and fractured rock mass failure mechanism were important research in geotechnical engineering field. Many failures and instability in geotechnical engineering were related on fractures propagation, coalescence and interaction in rock mass under the external force. Most of the current research were limited to two-dimensional for the brittleness and transparency of three-dimensional fracture materials couldn't meet the requirements of the experiment. New materials with good transparent and brittleness were developed by authors. The making method of multi fracture specimens were established and made molds that could be reused. The tension-compression ratio of the material reached above 1/6 in normal temperature. Uniaxial and biaxial loading tests of single and double fracture specimens were carried out. Four new fractures were not found in the experiment of two-dimensional fractures such as the fin shaped crack, wrapping wing crack and petal crack and anti-wing crack. The relationship between stress and strain of the specimens were studied. The specimens with the load had experienced four stages of deformation and the process of the fracture propagation was clearly seen in each stage. The expansion characteristics of the fractured specimens were more obvious than the previous research.

• 대기
• /
• 제21권3호
• /
• pp.243-256
• /
• 2011

This paper presents the development of new algorithm for identifying and tracking the convective cells in three dimensional reflectivity fields in Cartesian coordinates. First, the radar volume data in spherical coordinate system has been converted into Cartesian coordinate system by the bilinear interpolation. The three-dimensional convective cell has then been identified as a group of spatially consecutive grid points using reflectivity and volume thresholds. The tracking algorithm utilizes a fuzzy logic with four membership functions and their weights. The four fuzzy parameters of speed, area change ratio, reflectivity change ratio, and axis transformation ratio have been newly defined. In order to make their membership functions, the normalized frequency distributions are calculated using the pairs of manually matched cells in the consecutive radar reflectivity fields. The algorithms have been verified for two convective events in summer season. Results show that the algorithms have properly identified storm cells and tracked the same cells successively. The developed algorithms may provide useful short-term forecasting or nowcasting capability of convective storm cells and provide the statistical characteristics of severe weather.

• 한국의류학회지
• /
• 제22권3호
• /
• pp.374-383
• /
• 1998

Apparel Quality was one of the most important elements to evaluate the reputations of companies and products which affect the consumer's purchasing behavior. From researches on apparel quality, there was no common concept of quality as well as no common dimensions. The purposes of this study were to identify apparel quality concept and to classify the multi-dimensional concept of apparel quality. The research was carried out in theoretical as well as empirical studies. The theoretical study was conducted to find out apparel quality concept and divide apparel quality concept into four dimensions groups. The empirical study followed the theoretical study to confirm the multi-dimensional concept of apparel quality. The empirical study was investigated that the questionnaire was administered to 634 housewives in Seoul, Kwangju, and Busan during the fall of 1996. The data were analysed by LISREL analysis. This study identified that apparel quality was characteristics of consumer's desires for apparel. The results of the theoretical study verified that apparel quality concept was organized into four different dimensions: physical attribute, physical function, instrumental performance, and expressive performance.

• 한국실내디자인학회논문집
• /
• 제23권4호
• /
• pp.63-71
• /
• 2014

Anamorphosis is highly favored in modern days as the atmosphere of pursuing unusual manners is growing while transformation and distortion of images are freely available. This research is to understand the affect of these distorted images on space designs and the close connection between anamorphosis and visual perceptions, and to identify the new perceptual phenomenon created through it, and the methods of expressing those. Four expressional methods were defined through the process of studying Anamorphosis based on its definition by Niceron, examining artworks such as paintings and photographs, and case-studying example spaces of visual perception experiments. Expressing anamorphosis through visual perceptions are broadly categorized to directional, dimensional, flatness, and optical. The analysis of 10 case projects suggests that the experimental spaces offer joys of finding and interpreting metaphorical forms and meanings caused by the four characteristic categories above. Also, they artificially show the boundaries between reality and virtual spaces in 2-dimensional or 3-dimensional spaces, and form hyper-boundaries, new experience, and an internal mechanism that is vague and chaotic. Therefore, this research concludes that anamorphosis which is a distorted perspective, is not only a simple measure to overcome perspectival errors, but is an existence suitable to the current era, that will extend its potential and value in spatial design.