• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.4
• /
• pp.361-371
• /
• 1983

The turbulent structures of the free plane jet and two dimensional impinging jet are investigated experimentally. In order to get the two dimensional jet, the contour of the cubic equation suggested by Morel is used for a contracting nozzle. A linearized constant-temperature hot-wire anemometer is used for measurement. Mean velocities and turbulent intensities are measured along the centerline of the jet. Jet halp width spatial double velocity correlation coefficients and integral length scales are obtained. It is established that the free plane jet is truly self-preserving about 40 slot widths downstream of the nozzle. The experiments for the impinging jet are carried out at four different impingement wall locations within the self-preserving region of the free plane jet, and comparing the results with that of free plane jet, the mean velocity is changed in the region of 0.25H and turbulent intensities are affected in the region of 0.2H from the wall, respectively, where H means the distance between the nozzle exit and the wall.

• The Korean Journal of Ecology
• /
• v.15 no.4
• /
• pp.365-375
• /
• 1992

The environmental gradient analyses were applied for the distribution patterns of species populations in mt. moak provincial park in korea. The species populations were sequentially ordered along the environmental gradients such as soil moisture, soil ph, soil organic matter content and elevation and were grouped into seven ecological groups by the two-dimensional analyses of temperature-moisture gradient : zelkova serrata group on mesic-lower parts near the streames and well drained stony slopes, carpinus tschonoskii group on mesic-middle parts, quercus acutissima group on lower parts destroyed by human activities, quercus variabilis group on xeric-middle parts, quercus serrata group on xeric-upper middle parts, quercus mongolica group on xeric-upper parts and pinus densiflora group on xeric-rock ridge lines, hillocks and lower parts interfered by human. Four forest vegetation types, zelkova forest dominated by the c. tschonoskii group on mesic-middle parts, oak forest dominated by the groups of q. acutissima, q. variabilis, q. serrata and q. mongolica on xeric sites and pine forest dominated by the p. densiflora group on dry and poor sites, were separated in mosaic chart by the two-dimensional analysis.

• Journal of Korean Institute of Industrial Engineers
• /
• v.17 no.1
• /
• pp.37-49
• /
• 1991

This report describes an integrated approach to sculptured surface design and manufacture, and a software package for it on a multi-axis NC milling machine. The integrated software consists of four parts : (1) surface fitting procedure for generating the characteristic polyhedron from 3 dimensional CMM data, (2) surface description for generating the mathematical representation of sculptured surfaces. (3) tool path generation for approximating the surface representation into a sequence of linear cutter paths, and (4) tool control for generating the corresponding joint variable values. This integrated approach is generally applicable to sculptured surface manufacturing where multi-axis milling machines are necessary to produce smooth three-dimensional surfaces.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.4
• /
• pp.242-247
• /
• 2009

AILU type preconditioners for a two-dimensional combined P2P1 finite element formulation of the interaction of rigid cylinder with incompressible fluid flow have been devised and tested by solving fluid-structure interaction (FSI) problems. The FSI code simulating the interaction of a rigid cylinder with an unsteady flow is based on P2P1 mixed finite element formulation coupled with combined formulation. Four different preconditioners were devised for the two-dimensional combined P2P1 finite element formulation extending the idea of Nam et al., which was proposed for the preconditioning of a P2P1 mixed finite element formulation of the incompressible Navier-Stokes equations. It was found that PC-III or PC-IV among them perform well with respect to computational memory and convergence rate for some bench-mark problems.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.46-55
• /
• 1996

As industrial standard data, the STL format which approximates three dimensional CAD model to triangular facets, is used for RP(Rapid Prototyping) system in recent days. Because most RP system take the only form of two dimensional line segments as an input stream inspite of its imperfectness while converting into STL format, a CAD model is converted into a standard industrial format which is composed of many triangular facets. The error verifying process is composed of four main steps, and these are 1) Remove facets with two or more vertices equal to each other. 2) Fix overlapping error such as more than three facets adjacent to anedge. 3) Fill holes in the mesh by using Delaunay triangulation method. 4) Correct the wrong direction and normal vectors. This paper is concerned with serching the mentioned errors in advance and modifying them.

• Journal of the Korean Society of Combustion
• /
• v.20 no.2
• /
• pp.14-27
• /
• 2015

Calcination, which represents thermal decomposition of $CaCO_3$, is the key reaction in a cement process. Some reactions including heating-up also take place simultaneously in the calcination reactors. Basic thermal performance and dimensions of the reactors in two cases, which are a rotary kiln wih a four-stage cyclone pre-heater and a simple single rotary kiln, were compared. To employ the heat transfer, mass transfer and reaction rate as well as calcination, one-dimensional modeling was conducted in each case. Some simplification about the reactors was described, however, the reliable Nusselt number and heat transfer coefficients on the reactors were used to make results reliable.

• Journal of the Korean Society of Combustion
• /
• v.7 no.1
• /
• pp.31-36
• /
• 2002

Vortical structures are investigated numerically for both cold and combusting flows from a two-dimensional bluff-body burner in the transitional flow regime from steady to unsteady state. The Reynolds number of the central fuel flow is varied from 10 to 230 at a fixed air Reynolds number of 400. The flame sheet model of infinite chemical reaction and unit Lewis number are assumed in the simulation. The temperature dependence of the viscosity and diffusivity of the gas mixture is also considered. The vortex shedding is observed depending on the fuel flow. For cold flow, four different types of vortical structure are identified. However, for combusting flow of methane-air system the vortical structures change significantly due to a large amount of heat release during the combustion process, in contract to cold flow.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.57
• /
• pp.87-92
• /
• 2000

This paper describes a three dimensional parametric modeling system for transmission gears of tractor. In conventional design and manufacturing, information about three dimensional shapes has been described in engineering drawings. However drawing based design presents several problems; 1) communication errors between the designer and the modeller or manufacturer. 2) time taken and costs incurred in the design process. To solve these problems the system of parametric design based modeling has been proposed. Developed system in this paper consists of four steps; 1) parametric design of transmission gears with a solid modeler. 2) evaluation of gear geometry and strength. 3) dynamic simulation for gear interference check. 4) gear stress analysis with a CAE software. The proposed system has been tested in the fields and found to be a useful system.

• Journal of the Optical Society of Korea
• /
• v.20 no.2
• /
• pp.257-262
• /
• 2016

A two-dimensional optical code division multiple access (OCDMA) en/decoder composed of four double-ring resonator add/drop filters and three delay waveguides is designed, and a transfer matrix method combined with fast Fourier transform is implemented to provide numerical simulations for the en/decoder. The auto-correlation peak level over the maximum cross-correlation level is larger than 3 at the center of the correctly decoded pulse for most of wavelength hopping and spectral phase code combinations, which assures the BER lower than 10^-3 which corresponds to the forward error correction limit.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.445-449
• /
• 1993

The role of a robot becomes more important as factory automation is widely spread in the manufacturing industry. An off-line program system has been required for uninterruption of production lines because it can save cost and time spent in adjusting a robot to a new workcell. The objective of this paper is to develop our own OLP system for a SCARA type FARA robot with four axes. Three-dimensional graphic results are presented for the case when the robot is simulated using the computed torque method with a PD controller and the continuous path trajectory planning.