• 대한치과교정학회지
• /
• 제44권5호
• /
• pp.229-235
• /
• 2014

Objective: The aim of this study was to assess artifacts induced by metallic restorations in three-dimensional (3D) dental surface models derived by cone-beam computed tomography (CBCT). Methods: Fifteen specimens, each with four extracted human premolars and molars embedded in a plaster block, were scanned by CBCT before and after the cavitated second premolars were restored with dental amalgam. Five consecutive surface models of each specimen were created according to increasing restoration size: no restoration (control) and small occlusal, large occlusal, disto-occlusal, and mesio-occluso-distal restorations. After registering each restored model with the control model, maximum linear discrepancy, area, and intensity of the artifacts were measured and compared. Results: Artifacts developed mostly on the buccal and lingual surfaces. They occurred not only on the second premolar but also on the first premolar and first molar. The parametric values increased significantly with increasing restoration size. Conclusions: Metallic restorations induce considerable artifacts in 3D dental surface models. Artifact reduction should be taken into consideration for a proper diagnosis and treatment planning when using 3D surface model derived by CBCT in dentofacial deformity patients.

• 구강회복응용과학지
• /
• 제22권4호
• /
• pp.341-348
• /
• 2006

Accurate fit of the implant prosthesis is important in ensuring long term success of osseointegrated implant. Inaccurate fit of the implant prosthesis may give rise to complications and mechanical failure. To evaluate fite of the implant prosthesis, the development of the methods of analyzing the degree of misfit is important in clinical practice. To analyze the degree of the misfit of implant prosthesis, modal testing was used. A 2-dimensional finite element modal testing was accomplished. Four 2-dimensional finite element models with various levels of misfit of implant prostheses were constructed. Thickness gauges were simulated to make misfit in the implant prostheses. With eigenvalue analysis, the natural frequencies of the models were found in the frequency domain representation of vibration. According to the difference of degree of misfit, natural frequencies of the models were changed.

• 한국환경과학회지
• /
• 제11권1호
• /
• pp.25-32
• /
• 2002

In order to control of water quality in Jeju harbor, variation of physical oceanographic environments was estimated using material cycle model. It is composed of the three-dimensional hydrodynamic model for the simulation at water flow and material cycle model for the simulation of water quality. The three dimensional hydrodynamic model simulation of the circulation and mixing in Jeju Harbor has been conducted forced by Sanzi River Discharge, Tidal elevation, wind and Solar heat in case of August and November, 2000 and February and May, 2001, respectively. The results of numerical model and observation show that the model can produce realistic results of current in the harbor. The monthly variation of velocity pattern are not so much changed are found In Jeju Harbor. The residual current was forced by temperature, salinity, density, wind and tidal current. The residual current of August, 2000 are the strongest among four month. It can be explained that the density effect can be important role in residual current at Jeju Harbor. As the results of salinity distribution simulation, very low concentration of all levels were simulated in August, 2000. The flowrate of Sanzi river was investigated 77,760 ㎥ /d in August, 2000. Therefore, pollutant loadings from Sanzi river should be considered for water quality management in Jeiu harbor.

• The Korean Journal of Ecology
• /
• 제13권2호
• /
• pp.83-92
• /
• 1990

Two-dimensional analysis provides a comprehensive description of the structure, scales of pattern and directional components in a spatial data set. In spectral analysisi, four functions are illustrated,; the autocorrelation, the periodogram, the R-spectrum and the $\theta$ -spectrum. The R-spectrum and $\theta$ -spectrum function respectively summarize the periodogram in term of scale of pattern and directional components. Sampling is measured in the Naejang National Park area where the Daphniphyllum trees grow. 320 contiguous (15$\times$15)m plots are located along the transect and density of all trees over DBH 3 cm recorded respectively. 12 species of vascular plant are recorded in this survey area. The trend surface of density of all plant are estimated using polynomial regression and are exhibited in 3-dimensional graph and density contour map. Transformation to the corresponding polar spectrum from the periodogram emphasized the directional components and the scales to pattern. R-spectrum corresponding to the scale of pattern of periodogram showed a large peak 15.47 in the interval 9$\theta$-spectrum corresponding to directional components have two peaks 8.28 and 11.05 in the interval $35^{\circ}\theta <45^{\circ}and 125^{\circ}\theta< <135^{\circ}, respectively. Programs to compute all the analyses described in this study was obtained from Dr. Ranshow and was translated to BASIC by the author.

• 한국대기환경학회지
• /
• 제17권4호
• /
• pp.331-345
• /
• 2001

The increase of carbon monoxide in the ambient air due to the emissions from point sources without control was estimated using three -dimensional numerical models. The target area was Ulsan where one of the largest industrial complexes was located. As a typical example using numerical models for air quality impact analysis of criteria pollutants that will determine whether the air quality standards would be exceeded or not, the following approaches were suggested. They include: (1) investigation of pre-existing atmospheric conditions, (2) identification of major factors causing high concentrations, (3) selection of episode days. (4) preparation of three-dimensional meteorological data, (5) confirmation of agreement between measured and predicted concentrations in the emission conditions of episode days, and (6) estimation of the impact due to changes of the emission conditions. In the present work, daily meteorological conditions for the specific period were classified into four clusters of distinctive features, and the episode days were selected individually from each cluster. Emphasis was placed on the selection of episodes representing meteorological conditions conducive to high concentrations especially for point sources that were sensitive to the wind direction variations.

• 정보처리학회논문지C
• /
• 제13C권2호
• /
• pp.161-166
• /
• 2006

무선통신에 널리 사용되는 PN(Pseudorandom Noise) 부호를 사용하여 생성 부호 수를 증가시키고 양극성 상관 수신기에서 가입자간 간섭잡음을 완전히 제거할 수 있는 2D 광 CDMA 방식을 사용한 광 가입자 망을 제안한다. 제안 시스템에서 특성을 수치적으로 분석한 결과 EIN(Excess Intensity Noise) 잡음이 지배적인 잡음전력인 것을 알 수 있다. 그리고 제안한 2D 광 CDMA 시스템에서 동시 사용 가능한 가입자의 수가 동일 성능조건하에 종래의 ID 광 CDMA 시스템보다 4배 향상된 것을 알 수 있다.

• Journal of the Korean Wood Science and Technology
• /
• 제48권3호
• /
• pp.283-290
• /
• 2020

For visual inspection-based wood identification, optical microscopy techniques typically require a relatively large sample size, and a scanning electron microscope requires a clean surface. These novel techniques experience limitations for objects with highly limited sampling capabilities such as important and registered wooden cultural properties. Synchrotron X-ray microtomography (SR-µCT) has been suggested as an effective alternative to avoid such limitations and various other imaging issues. In this study, four pieces of wood fragments from wooden members used in the Manseru pavilion of Bongjeongsa temple in Andong, Korea, wereused for identification. Three-dimensional microstructural images were reconstructed from these small wood samples using SR-µCT at SPring-8. From the analysis of the reconstructed images, the samples were identified as Zelkova serrata, Quercus sect. Cerris, and Pinus koraiensis. The images displayed sufficient spatial resolution to clearly observe the anatomical features of each species. In addition, the three-dimensional imaging allowed unlimited image processing.

• 제어로봇시스템학회논문지
• /
• 제14권7호
• /
• pp.702-710
• /
• 2008

In this paper, the observability of the INS/GPS integrated system for a land vehicle is analyzed on measurements and different filters with respect to the measurements are designed. In the stationary case, it is shown that horizontal accelerometer biases and vertical attitude errors and gyro biases are unobservable. An 8-state filter is designed based on the observability analysis. When GPS signal is available, a 15-state filter is used with position and velocity measurements. To estimate the INS errors even in the case that GPS signal is blocked a filter is designed in consideration of the non-holonomic constraints of a land vehicle. In this case, the horizontal position and velocity errors and vertical attitude error are unobservable. However, a 12-state filter including the velocity states is designed to estimate the accelerometer biases. When GPS signal recovers, a 9-state filter is used excluding the sensor biases. This paper presents a multi-dimensional filter that switches the four filters according to the usable measurements and maneuver environments. A simulation is carried out to verify the performance of the proposed filter.

• Journal of Information Technology Applications and Management
• /
• 제20권1호
• /
• pp.87-106
• /
• 2013

This study is to explore the airline network patterns of Incheon and Narita International Airports using passenger flight departure and arrival data of the two airports. The so-called Origin-Destination data is collected from the airports' websites and some of the important data items are flight number, city of origin, destination city, departure/arrival time, number of flights, and delay time. A snowflake schema dimensional model is proposed and implemented. Tableau Public, a well-known visual analytic tool, is used to connect the dimensional model and played an important role in navigating the data space to find interesting and visual patterns among corresponding airports and airlines. For the efficiency of analyzing this spacious data mart, data visualization method was used. Four types of visualization method proposed by Yau was used; visualizing patterns over time, visualizing proportions, visualizing relationships, and visualizing spatial relationships. The strength of connectivity of each flight segments is calculated to evaluate the degree of globalization of Seoul and Tokyo. We anticipate that various patterns and new findings produced by the data mart would provide airline managers, airport authorities, and policy makers in the field of travel and transportation with insightful information.

• ETRI Journal
• /
• 제39권2호
• /
• pp.264-274
• /
• 2017

Recently, mobile positioning enhancement has attracted much attention in the 3rd generation partnership project long-term evolution system. In particular, for urban canyon environments, the need for three-dimensional (3D) positioning has increased to enable the altitude of users to be measured. For several decades, several time difference of arrival (TDOA-) based 3D positioning methods have been studied; however, they are only available when at least four evolved Node Bs (eNBs) exist nearby or when all eNBs have the same height. Therefore, in this paper, we propose a new 3D positioning method that estimates the 3D coordinates of a user using three types of two-dimensional (2D) TDOAs. However, the give inaccurate results owing to the undefined axis of the 2D coordinate plane. Therefore, we propose a novel derivation of the hyperbola equation, which includes the undefined axis coordinate in the 2D hyperbola equation. Then, we propose an interaction algorithm that mutually supplies the undefined axis coordinate of users among 2D TDOAs. By performing extensive simulations, we verify that the proposed method is the only solution applicable by using three eNBs with different heights.