• Korean Journal of Radiology
• /
• v.25 no.6
• /
• pp.511-517
• /
• 2024

Objective: To prospectively investigate the influence of the menstrual cycle on the background parenchymal signal (BPS) and apparent diffusion coefficient (ADC) of the breast on diffusion-weighted MRI (DW-MRI) in healthy premenopausal women. Materials and Methods: Seven healthy premenopausal women (median age, 37 years; range, 33-49 years) with regular menstrual cycles participated in this study. DW-MRI was performed during each of the four phases of the menstrual cycle (four examinations in total). Three radiologists independently assessed the BPS visual grade on images with b-values of 800 sec/mm² (b800), 1200 sec/mm² (b1200), and a synthetic 1500 sec/mm² (sb1500). Additionally, one radiologist conducted a quantitative analysis to measure the BPS volume (%) and ADC values of the BPS (ADC_BPS) and fibroglandular tissue (ADC_FGT). Changes in the visual grade, BPS volume (%), ADC_BPS, and ADC_FGT during the menstrual cycle were descriptively analyzed. Results: The visual grade of BPS in seven women varied from mild to marked on b800 and from minimal to moderate on b1200 and sb1500. As the b-value increased, the visual grade of BPS decreased. On b800 and sb1500, two of the seven volunteers showed the highest visual grade in the early follicular phase (EFP). On b1200, three of the seven volunteers showed the highest visual grades in EFP. The BPS volume (%) on b800 and b1200 showed the highest value in three of the six volunteers with dense breasts in EFP. Three of the seven volunteers showed the lowest ADC_BPS in the EFP. Four of the seven volunteers showed the highest ADC_BPS in the early luteal phase (ELP) and the lowest ADC_FGT in the late follicular phase (LFP). Conclusion: Most volunteers did not exhibit specific BPS patterns during their menstrual cycles. However, the highest BPS and lowest ADC_BPS were more frequently observed in EFP than in the other menstrual cycle phases, whereas the highest ADC_BPS was more common in ELP. The lowest ADC_FGT was more frequent in LFP.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.12
• /
• pp.1684-1690
• /
• 2005

Using mRNA differential display technique, we investigated differential gene expression in hybrids relative to their parents in a diallel cross involving four chicken breeds in order to provide an insight into the molecular basis of heterosis in chicken. The results indicated that there was extensive differential gene expression between chicken F1 hybrids and their parents which was classified into four kinds of patterns as following: (1) bands only detected in hybrid F1; (2) bands only absent in hybrid F1; (3) bands only detected in parent P1 or P2; (4) bands absent in parent P1 or P2. Forty-two differentially expressed cDNAs were cloned and sequenced, and their expression patterns were confirmed by Reverse-Northern dot blot. Sequence analysis and database searches revealed that genes showed differential expression between hybrid and parents were regulatory and functional genes involved in metabolism, mRNA splicing, transcriptional regulation, cell cycles and protein modification. These results indicated that hybridization between two parents can cause changes in expression of a variety of genes. In conclusion, that the altered pattern of gene expression in hybrids may be responsible for heterosis in chickens.

• Ocean Science Journal
• /
• v.43 no.2
• /
• pp.115-126
• /
• 2008

Direct measurements of four radiative components at air-sea boundary layer were conducted in the southern Yellow Sea during three cruises (seasons) in 2007. Simultaneous observations of meteorological (cloud cover, air temperature and humidity) and oceanographic (sea surface temperature) parameters were carried out. Observational results of radiative fluxes and meteorological and oceanographic parameters are presented. Mean diurnal cycles of four radiative components, net radiation, and sea surface albedo are calculated to achieve averages in different seasons. Net radiative fluxes in three seasons (winter, spring, autumn) are 8, 146, $60\;W/m^2$, respectively. Comparisons between the observed radiative fluxes and those estimated with formulas are taken.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.3
• /
• pp.105-112
• /
• 2013

In this paper, EV (Electric Vehicle) and ICE (Internal Combustion Engine) vehicle simulators are developed to compare maximum driving range of EV and ICE vehicle according to different driving patterns. And, simulations are performed for fourteen constant velocity cases (20, 30, 40, ${\ldots}$, 150 km/h) and four different driving cycles. From the simulation results of constant velocity, it is found that the decreasing rate of maximum driving range for EV is larger than the one for ICE as both the vehicle velocity and the driving power increase. It is because the battery efficiency of EV decreases as both the velocity and the driving power increase, whereas the engine and transmission efficiencies of ICE vehicle increase. From the results of four driving cycle simulation, the maximum driving range of EV is shown to decrease by 50% if the average driving power of driving cycle increases from 10 to 20kW. It is because the battery efficiency decreases as the driving power increases. In contrast, the maximum driving range of ICE vehicle also increases as the average driving power of driving cycle increases. It is because the engine and transmission efficiencies also increase as the driving power increases.

• Journal of Applied Reliability
• /
• v.17 no.1
• /
• pp.78-82
• /
• 2017

Purpose: The purpose of this study is to evaluate failure characteristic and mechanism of four commercial water-repellent coatings for elevated temperature machinery applications. Method: Thermal degradation was performed for up to 64 thermal cycles. 1 cycle consists of 15 minute holding at 523K under 300rpm revolution and 15 minute-natural cooling. Contact angle was measured and microstructure of the coating layer was observed by using a scanning electron microscope. Results: Four kinds of commercial repellent coating showed hydrophobic or super-hydrophobic property implying that all coatings are suitable for room temperature application. Contact angle of three kinds of commercial coatings decreased rapidly after thermal exposure, while only one specimen having hydrophobic surface showed extremely slow degradation. Conclusion: Observed decrease in contact angle of the coatings were attributed to formation of macro-sized pores and disappearance of micro-protrusion during thermal exposure. Optimum water-repellent coating needs to be selected under the consideration of initial contact angle as sell as service temperature.

• Food Science and Biotechnology
• /
• v.14 no.6
• /
• pp.738-742
• /
• 2005

We developed a musical composition and performing method for the dynamic expression of food taste, to replace the static expression obtained from a numerical sensory score and linguistic method. The musical score was composed using cognitive food sensory data gathered while eating potato chips via a computer equipped with a sound card and a master keyboard, as well as Cakewalk 9.0, Goldwave 5.0, and Windows Media Player. The music score included four lines, one representing sensory data and three reflecting three layers of human consciousness. Different time units were applied by incorporating different repetition cycles for the relevant consciousness layers. The musical scores of individual subjects differed in terms of the score pattern and its sound. The music representing food taste was played by four instruments and showed different sound and acoustic frequency patterns for each individual subject during the consumption of potato chips. The musical expression method was applied to analyze the individual taste characteristics in the cognition of food.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.313-320
• /
• 2013

The four-dimensional cycle simulator, which can recognize whether the road is ascent or descent, its gradient, and status of its surface on Virtual Reality, is introduced in this paper. On the base of these recognitions, various virtual motion path situations are displayed on LCD monitor attached ahead. These various situations may support not only the sense of realty but also an interest in a game in opposition to previous exercise cycles that might be monotonous. In this paper both analysis and estimation of basic bodily abilities for the four-dimensional cycling are addressed.

• Mycobiology
• /
• v.37 no.4
• /
• pp.247-250
• /
• 2009

Twenty-five isolates of Fusarium fujikuroi acquired from rice seeds and rice plants evidencing symptoms of Bakanae disease were evaluated to determine their mating types and characterize the formation of their sexual state. The mating types of the isolates were evaluated via multiplex PCR with the diagnostic primers of the mating-type (MAT) region: GFmat1a, GFmat1b, GFmat2c, and GFmat2d. Among the 25 isolates, 11 were identified as MAT-1 (male), and 14 as MAT-2 (female). Four MAT-1 isolates and three MAT-2 isolates were mated and cultured to evaluate the optimal culture conditions for the production of their sexual states. Among four tested media, 10% V8 juice agar proved optimal for the perithecial production of the isolates. The isolates also generated the largest numbers of perithecia when incubated at 23oC in alternating cycles of 12 hr fluorescent light and NUV fluorescent light and 12 hr darkness.

• Journal of the Korean Society of Safety
• /
• v.34 no.5
• /
• pp.103-110
• /
• 2019

In order to reduce the accidents occurring at construction sites, it is necessary to approach with harmonious measures considering various aspects such as systems, training, facilities, and protection equipments. Suggestion of safe construction method can be a good alternative. In the previous study, the half-depth precast deck with RC rib panel was proposed as an alternative method for safe bridge deck construction, and the performance required by the design code was verified through a four-point bending test. But the actual bridge deck is subjected to the repetitive action of the wheel load rather than the bending condition due to the four-point load. In this study, fatigue test was performed by repeating the wheel load $2{\times}10^6$ cycles to verify the safety of the half-depth precast deck with RC rib panel under actual conditions. As a result, fatigue effect due to repetition of wheel load was not significant in terms of serviceability such as crack width and deflection. In the residual strength test conducted after the fatigue test, the half-depth precast deck with RC rib panel failed by punching shear which is typical failure mode of bridge decks and the residual strength was similar to the punching strength of the RC and PSC bridge decks in spite of the fatigue effects.

• Geomechanics and Engineering
• /
• v.23 no.6
• /
• pp.561-573
• /
• 2020

The creep and consolidation behaviors of clays subjected to thermal cycles are of fundamental importance in the application of energy geostructures. This study aims to numerically investigate the physical mechanisms for the temperature-triggered volume change of saturated clays. A recently developed thermodynamic framework is used to derive the thermo-mechanical constitutive model for clays. Based on the model, a fully coupled thermo-hydro-mechanical (THM) finite element (FE) code is developed. Comparison with experimental observations shows that the proposed FE code can well reproduce the irreversible thermal contraction of normally consolidated and lightly overconsolidated clays, as well as the thermal expansion of heavily overconsolidated clays under drained heating. Simulations reveal that excess pore pressure may accumulate in clay samples under triaxial drained conditions due to low permeability and high heating rate, resulting in thermally induced primary consolidation. Results show that four major mechanisms contribute to the thermal volume change of clays: (i) the principle of thermal expansion, (ii) the decrease of effective stress due to the accumulation of excess pore pressure, (iii) the thermal creep, and (iv) the thermally induced primary consolidation. The former two mechanisms mainly contribute to the thermal expansion of heavily overconsolidated clays, whereas the latter two contribute to the noticeable thermal contraction of normally consolidated and lightly overconsolidated clays. Consideration of the four physical mechanisms is important for the settlement prediction of energy geostructures, especially in soft soils.