• Progress in Superconductivity and Cryogenics
• /
• v.4 no.1
• /
• pp.73-77
• /
• 2002

The variation of critical current by the formation of crack in a high temperature super-conducting tape was studied by experimental and numerical analyses. The current-voltage relation of HTS tape is measured by the four-point measurement method. Numerical analyses are used to solve two dimensional heat conduction equation, considering the temperature distribution. By comparing current-voltage relation of experimental and numerical results, the validity of numerical method is verified.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.401-407
• /
• 2012

This paper analyzes performance of major obstacle avoidance methods. For the analysis, numerical performance indexes are proposed: motion distance to goal point, motion time, distance to obstacles, and smoothness of the motion. Especially, the index of smoothness measures efficiency of the motion using the angular acceleration and jerk of the robot heading. Four major obstacle avoidance methods are compared in terms of the performance indexes. The four methods are artificial potential field(APF) method, elastic force(EF) method, APF with virtual distance, and EF with virtual distance. Through simulation, the four methods are compared and features of the methods are explored.

• Journal of Korean Physical Therapy Science
• /
• v.3 no.3
• /
• pp.71-85
• /
• 1996

The Quality of physical therapy school system has conflicts between physical therpist, and reduces the opportunity of seguential education. So this study was investigated in order to made concrete the problems of educational duality, set up the direction of the school system's improvement, as like the four-year system and recognized the necessity. The curriculums of 13 colleges and 5 universities was analyzed. The curriculum analysis was made up the comparison and the analysis by a liberal arts point, a major point, a clinical practice point, total opening subjects, and so on. The analyzing results were as follows. 1. The average rates of a liberal arts vs. a major opening point are 17:83 in college, and are 27:73 in university. 2. It is a serious problem that college are lower than university in a liberal arts. The best method that can solve it is lengthen the number of school years. 3. There is no difference between college and university in a major subject. Rather college has the more subject's numbers than university. 4. There is no difference between college and university in a clinical practice. Above results suggests that there is not different between college and university in a major subject except for a liberal arts point. It is proper that one should be unificate the curriculum according to the sameness between a state examination and a license. Therefore, it is necessary for graduates from college that provides the opportunity of proceeding to a higher school, demands the seguential system of study cultivating and producing a bachelor, and requires the continual education in a clinical field, a bachelor admitting system of continual education, and clinical therapist's qualification. The present physical therapy educational systems should be unificated because of many right reasons. On the other hand, the follw-up study that improving the school system about the four-years and the more physical therapy should be continue from the viewpoint of education.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11
• /
• pp.3140-3149
• /
• 1999

Skew correction for document images can be using a rotational transformation of pixel coordinates. In this paper we propose a method which corrects the document skew, by an amount of $\theta$ degrees, using block information, where the block is defined as a rectangular area containing adjacent black pixels. Processing speed of the proposed method is faster than that of the method using pixel transformation, since the number of floating-point operations can be reduced significantly. In the proposed method, we rotate only the four corner points of each block, and then identify the pixels inside the block. Two methods for inside pixel identification are proposed; the first method finds two points intersecting the boundary of the rotated block in each row, and determines the pixels between the two intersection points as the inside pixel. The second method finds boundary points based on Bresenham's line drawing algorithm, using fixed-point operation, and fills the region surrounded by these boundaries as black pixels. We have measured the performance of the proposed method by experimenting it with 2,016 images of various English and Korean documents. We have also proven the superiority of our algorithm through performance comparison with respect to existing methods based on pixel transformation.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.117-128
• /
• 2016

Installation of earth grounding system is essential to ensure personnel safety and correct operation of electrical equipment. Earth parameters, especially, soil resistivity has to be determined in designing an efficient earth grounding system. The most common applied technique to measure soil resistance is Wenner four-point method. Implementation of this method is expensive, time consuming and cumbersome as large set of measurements with variable electrode spacing are required to obtain a one dimensional resistivity plot. It is advantageous to have a method which is of low cost and provides fast measurements. In this perspective, electrical resistance tomography (ERT) is applied to estimate subsurface resistivity profile. Electrical resistance tomograms characterize the soil resistivity distribution based on the measurements from electrodes placed in the region of interest. The nonlinear ill-posed inverse problem is solved using iterated Gauss-Newton method with Tikhonov regularization. Through extensive numerical simulations, it is found that ERT offers promising performance in estimating the three-dimensional soil resistivity distribution.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.10a
• /
• pp.644-649
• /
• 1993

Practical structures are subject not only to tension but also to shear and torsional loading. In this study, the mode 1 and 2 stress intensity factors of specimens were calculated by using elastic finite element mothod. The stress fields at the crack tip subjected to mixed-mode loading were also studied by usingf eleatic finite element method and were compared with theoretical results. The three-point-bending, four-point-bending, and mixed-mode-loading experiment were carried out. And, crack propagation rate da/dN and crack growth direction were examined. Also, the elastic finite element method was applied to calculate the stress intensity factors of branch crack tip and we relate the stress intenity factor range of branch crack tip(the result of FEM) to crack propagation rate(the experimental result). The .DELTA. -da/dN relation corelated with that of mode 1.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.2
• /
• pp.35-43
• /
• 1984

The purpose of this paper is to develop a mathematical model which can be used to compute the position of the free surface due to water level fluctuations in the canal and the transient pressure distributions along the canal lining. The diagnostic equation has been solved by the point successive over-relaxation method, and the linearized prognostic equation has been solved by the implicit Lax-Wendroff scheme. Four different cases in the simulation conditions are presented for both permeable and impermeable canal lining to predict the transient seepage surface development.

• Applied Microscopy
• /
• v.25 no.3
• /
• pp.33-39
• /
• 1995

To compare the quality of ultrastructural preservation of Scanning Electron Microscopic specimens dried with different methods; pure air-drying, air-drying with using Tetramethylsilane(TMS), four kind of air-drying using Hexamethyldisilazane(HMDS) and critical point drying(CPD), we conducted scanning electron microscopic observation on liver, skeletal muscle and intestinal tissues from laboratory rat treated with each method. In pure air drying group, severe distortion of tissue surface was observed, and in HMDS treated group, only liver tissue showed slight distortion. But in TMS treated group, each tissue showed a good presentation comparable to CPD group. The results suggest that the method of air-drying using TMS may be the former is less expensive and simple be and also time-saving.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.131-134
• /
• 2002

The optimum design technology using combind F.E.M and eauivalent circuit is so fast and accurate that it can be applied to the optimum rotor design of an inverter-fed induction motor in high efficiency motor making industry. The optimum characteristics fer a rotor slot model of a 3 phase inverter-134 nduction motor was previously verified by a time-step F.E.M. In this paper, four verification models with the design variables near the optimum point are designed to chech whether the characteristics of a slot model presented is not less than those of the near models. The outputs of whole models are analyzed in a time-step Finite Element Method and compared in the experimental test. The economical and efficient selecting method of design variables fur the computer simulation and experimental test is presented in order to assure the optimum point.

• Transactions of Materials Processing
• /
• v.19 no.4
• /
• pp.248-252
• /
• 2010

In this paper, three-dimensional finite element analysis of thread rolling process of a 12 point flange head bolt is conducted using a rigid-plastic finite element method based metal forming simulator AFDEX 3D. A whole sequence of cold forming processes of a long shaft bolt composed of four forging stages and final thread rolling process is simulated to reveal the mechanism of thread formation. A mesh density control function is applied near the major plastic deformation region to achieve computational efficiency. It has been shown both numerically and experimentally that longitudinal lengthening or shortening is negligible in thread rolling.