• 한국음향학회지
• /
• 제37권6호
• /
• pp.437-442
• /
• 2018

본 논문에서는 환형배열을 이용하여 단일음원이 코히어런트 분산 분포를 가지는 경우 닫힌 형태로 음원의 위치를 추정하는 기법을 제안한다. 음원이 다중경로를 거쳐 센서에 도달하는 경우 분산음원으로 보이며 이때 음원의 위치는 대표 방위, 대표 고각, 대표 방위의 분포, 대표 고각의 분포 네 가지 변수로 표현될 수 있다. 이러한 경우 DSPE(Distributed Source Parameter Estimator) 기법과 같은 탐색 기법으로 네 변수를 찾기 위해서는 매우 많은 탐색과정을 필요로 한다. 본 논문에서는 빠른 위치 추정을 위해 센서간의 상관함수와 최소자승기법을 이용하여 닫힌 형식으로 대표 방위와 고각을 추정하는 기법을 제안한다. 특히 음원이 대표적인 분포 모델인 가우시안 분포를 따를 경우 방위와 고각의 표준편차 또한 닫힌 형식으로 추정한다. 시뮬레이션에서는 DSPE 기법과 비교하여 제안 기법의 타당성을 확인하였다.

• 수산해양기술연구
• /
• 제59권2호
• /
• pp.99-109
• /
• 2023

In this study, a comparative test operation was conducted through the alternate haul method to examine the selectivity of the four mesh sizes (60 mm, 90 mm, 110 mm, and 130 mm) of the trawl codend. The selectivity was analyzed using the SELECT model considering the fishing efficiency (split parameter) of each fishing gear in the comparative test fishing operation in the trawl and the maximum likelihood method for parameter estimation. A selectivity master curve was estimated for several mesh sizes using the extended-SELECT model. As a result of analyzing the selectivity for silver croaker based on the results of three times hauls for each experimental gear, it was found that the size of the fish caught increased as the size of the mesh size increased. When the selectivity for each mesh size analyzed by the SELECT model considering the split ratio was evaluated based on the size of the AIC value, the estimated split model was superior to the equal split model. Based on the master curve, the 50% selection length value was 2.893, which was estimated to be 136 mm based on the mesh size of 60 mm. In some selectivity models, there was a large deviance between observed and theoretical values due to the non-uniformity of the distribution of fished length classes. As a result, it is considered that appropriate sea trials and selectivity evaluation methods with high reliability should be applied to present trawl fishery resource management methods.

• 대한토목학회논문집
• /
• 제14권3호
• /
• pp.509-521
• /
• 1994

본 연구는 간헐 수문과정인 일 강수계열의 모의발생 모델을 개발한 것으로서, 일 강수계열의 구조적 특성인 강수발생과정과 습윤일의 강수량과정을 고려하였다. 본 연구는 두편이 논문으로 구성되어 있으며, 연구(I)에서는 강수발생과정을 위하여 고대재생과정(ARP)을 이용하였으며, 건조 습윤계속기간 분포에 대해서는 TBD, TPD, TNBD, LSD의 4가지 이산형 확률분포를 적용하였다. 후속논문인 연구(II)에서는 강수발생과정으로 Markov 연쇄모델을 이용한다. 그리고 습윤일의 강수량 분포에 대해서는 Gamma 분포, Pearson Type-III 분포, Type-III 극치분포, 3모수 Weibull 분포의 4가지 연속형 확률분포를 적용하였다. 연구(I)에서는 낙동강 유역의 대구, 고령, 밀양, 영주 관측소 및 섬진강 유역의 하동, 순창, 구례 관측소의 일 강수계열 자료를 사용하였으며, 강수발생과정과 습윤일의 강수량과정을 조합하여 구성한 두가지의 일 강수계열 모의발생 모델 A-W, A-G 모델의 적용성을 확인하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제43권4호
• /
• pp.456-462
• /
• 2015

KS F 3020-침엽수구조용재 기준에 따라 국산 소나무(Pinus densiflora) $38{\times}140{\times}3600mm$ 구조용 제재목 365개에 대하여 기계등급구분을 실시하고, 휨허용응력을 산출하여 현재 적용되는 KS기준허용응력과 비교 분석하였다. 휨허용응력 계산을 위하여 5% 휨강도 하한값을 75% 신뢰수준의 비모수적 방법, 2-parameter 그리고 3-parameter Weibull 분포를 가정한 모수적 방법, 휨강도-휨탄성계수 직선회귀 방법, 총 4가지 분석방법을 사용하여 결정하였다. 기계등급 E8, E9, E10 만이 비모수적 방법의 통계 처리가 가능한 자료 수를 얻었으며, 휨강도-휨탄성계수 직선회귀 방법은 이론적으로 모든 등급에 대한 5% 하한값 결정이 가능함을 보여주었다. 결정된 등급별 휨허용응력은 기준허용응력에 비하여 모두 낮은 값을 나타내었으며 이것은 과소설계의 위험성이 있는 것으로 현행 기계등급구분체계의 문제점으로 파악되었다. 이러한 문제는 구조설계 신뢰성과 관련하여 반드시 개선되어야 할 것으로, 휨강도-휨탄성계수 조합 등급 도입이 필요할 것으로 생각되었다.

• Macromolecular Research
• /
• 제9권4호
• /
• pp.210-219
• /
• 2001

Quenched and slow cooled as well as isothermally crystallized poly(tetramethylene succinate)(PTMS) films at two different temperatures were prepared. In the process of hydrolysis of the four specimens, structural changes such as the crystallinity, crystal size distribution, lattice parameter, lamellar thickness, long period and surface morphology were investigated by using wide and small angle X-ray scattering (WAXS and SAXS), differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The hydrolytic degradation of quenched film was faster than that of slow cooled and isothermally crystallized films. The film crystallized at 100$\^{C}$ exhibited extensive micro voids and thus showed faster degradation than that crystallized at 75$\^{C}$, demonstrating surface morphology is another important factor to govern degradation rate. The crystallinity of the specimen increased by 5-10% and long period decreased after hydrolysis for 20 days. At the initial stage of degradation, the lamellar thickness of quenched film rather increased, while that of slow cooled and isothermally crystallized films decreased. The hydrolytic degradation preferentially occurred in the amorphous region. The hydrolytic degradation in crystal lamellae are mainly at the crystal surfaces.

• Structural Engineering and Mechanics
• /
• 제12권2호
• /
• pp.201-214
• /
• 2001

Four finite element (FE) models are examined to find the one that best estimates moment-rotation characteristics of top- and seat-angle with double web-angle connections. To efficiently simulate the real behavior of connections, finite element analyses are performed with following considerations: 1) all components of connection (beam, column, angles and bolts) are discretized by eight-node solid elements; 2) shapes of bolt shank, head, and nut are precisely taken into account in modeling; and 3) contact surface algorithm is applied as boundary condition. To improve accuracy in predicting moment-rotation behavior of a connection, bolt pretension is introduced before the corresponding connection moment being surcharged. The experimental results are used to investigate the applicability of FE method and to check the performance of three-parameter power model by making comparison among their moment-rotation behaviors and by assessment of deformation and stress distribution patterns at the final stage of loading. This research exposes two important features: (1) the FE method has tremendous potential for connection modeling for both monotonic and cyclic loading; and (2) the power model is able to predict moment-rotation characteristics of semi-rigid connections with acceptable accuracy.

• Coupled systems mechanics
• /
• 제5권3호
• /
• pp.269-283
• /
• 2016

A two new high-order shear deformation theory for bending analysis is presented for a simply supported, functionally graded plate with porosities resting on an elastic foundation. This porosities may possibly occur inside the functionally graded materials (FGMs) during their fabrication, while material properties varying to a simple power-law distribution along the thickness direction. Unlike other theories, there are only four unknown functions involved, as compared to five in other shear deformation theories. The theories presented are variationally consistent and strongly similar to the classical plate theory in many aspects. It does not require the shear correction factor, and gives rise to the transverse shear stress variation so that the transverse shear stresses vary parabolically across the thickness to satisfy free surface conditions for the shear stress. It is established that the volume fraction of porosity significantly affect the mechanical behavior of thick function ally graded plates. The validity of the two new theories is shown by comparing the present results with other higher-order theories. The influence of material parameter, the volume fraction of porosity and the thickness ratio on the behavior mechanical P-FGM plate are represented by numerical examples.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권7호
• /
• pp.910-914
• /
• 2001

The teat number of a sow plays an important role for weaning pigs and has been utilized in selection of swine breeding stock. Various linear models have been employed for genetic analyses of teat number although the teat number can be considered as a count trait. Theoretically, Poisson error mixed models are more appropriate for count traits than Normal error mixed models. In this study, the two models were compared by analyzing data simulated with Poisson error. Considering the mean square errors and correlation coefficients between observed and fitted values, the Poisson generalized linear mixed model (PGLMM) fit the data better than the Normal error mixed model. Also these two models were applied to analyzing teat numbers in four breeds of swine (Landrace, Yorkshire, crossbred of Landrace and Yorkshire, crossbred of Landrace, Yorkshire, and Chinese indigenous Min pig) collected in China. However, when analyzed with the field data, the Normal error mixed model, on the contrary, fit better for all the breeds than the PGLMM. The results from both simulated and field data indicate that teat numbers of swine might not have variance equal to mean and thus not have a Poisson distribution.

• Steel and Composite Structures
• /
• 제26권3호
• /
• pp.273-287
• /
• 2018

Buckling and free vibration analysis of sandwich micro plate (SMP) integrated with piezoelectric layers embedded in orthotropic Pasternak are investigated in this paper. The refined Zigzag theory (RZT) is taken into consideration to model the SMP. Four different types of functionally graded (FG) distribution through the thickness of the SMP core layer which is reinforced with single-wall carbon nanotubes (SWCNTs) are considered. The modified couple stress theory (MCST) is employed to capture the effects of small scale effects. The sandwich structure is exposed to a two dimensional magnetic field and also, piezoelectric layers are subjected to external applied voltages. In order to obtain governing equation, energy method as well as Hamilton's principle is applied. Based on an analytical solution the critical buckling loads and natural frequency are obtained. The effects of volume fraction of carbon nanotubes (CNTs), different distributions of CNTs, foundation stiffness parameters, magnetic and electric fields, small scale parameter and the thickness of piezoelectric layers on the both critical buckling loads and natural frequency of the SMP are examined. The obtained results demonstrate that the effects of volume fraction of CNTs play an important role in analyzing buckling and free vibration behavior of the SMP. Furthermore, the effects of magnetic and electric fields are remarkable on the mechanical responses of the system and cannot be neglected.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권10호
• /
• pp.63-71
• /
• 2020

In this paper, we propose the new time-varying coefficient GARCH-in-Mean model. The benefit of our model is to allow the risk-return parameter in the mean equation to vary over time. At the end of 2019 to the beginning of 2020, the world witnessed two shocking events: COVID-19 pandemic and 2020 oil price war. So, we decide to use the daily data from December 2, 2019 to May 29, 2020, which cover these two major events. The purpose of this study is to find the dynamic movement between risk and return in four major oil markets: Brent, West Texas Intermediate, Dubai, and Singapore Exchange, during COVID-19 pandemic and 2020 oil price war. For the European oil market, our model found a significant and positive risk-return relationship in Brent during March 26-April 21, 2020. For the North America oil market, our model found a significant positive risk return relationship in West Texas Intermediate (WTI) during March 12-May 8, 2020. For the Middle East oil market, we found a significant and positive risk-return relationship in Dubai during March 12-April 14, 2020. Lastly, for the South East Asia oil market, we found a significant positive risk return relationship in Singapore Exchange (SGX) from March 9-May 29, 2020.