• 한국주조공학회지
• /
• 제43권2호
• /
• pp.67-74
• /
• 2023

• 한국주조공학회지
• /
• 제43권2호
• /
• pp.77-83
• /
• 2023

• 한국주조공학회지
• /
• 제43권2호
• /
• pp.84-87
• /
• 2023

• 한국주조공학회지
• /
• 제43권5호
• /
• pp.243-250
• /
• 2023

• 한국주조공학회지
• /
• 제27권2호
• /
• pp.65-71
• /
• 2007

• 한국주조공학회지
• /
• 제30권1호
• /
• pp.14-21
• /
• 2010

• 한국주조공학회지
• /
• 제30권4호
• /
• pp.137-141
• /
• 2010

The effects of Zn amounts on the castability and tensile properties of Al-Zn-Mg-Cu alloys were investigated for development of high strength die casting aluminium alloys. Al-Zn-Mg-Cu alloys with 3.5% Zn showed high cast cracking tendency and poor mold filling behaviour. Al-Zn-Mg-Cu alloys with 5wt% Zn and 7wt% Zn had the tensile strengths of 300~400MPa and the elongations of 2~18%. The effect of Zn on the tensile strength of Al-Zn-Mg-Cu alloys was insignificant, but Al-Zn-Mg-Cu alloy with high Zn amount had lower elongation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2002년도 봄 학술발표회 논문집
• /
• pp.665-672
• /
• 2002

In this paper, the utilization of waste foundry sand produced in the molding process is studied as a backfill material for underground electric utility systems such as concrete box structures and pipe lines for power supply. The physical, chemical and thermal properties for waste foundry sand are investigated for mechanical stability, environmental hazard and power transmission capacity. Also its properties are compared with the natural river sand. The test results show that waste foundry sand can be utilized for underground concrete box structures as a backfill material; however, it can not be applied to underground pipe lines due to high thermal resistivity or low power transmission capacity.

• 유기물자원화
• /
• 제18권4호
• /
• pp.38-44
• /
• 2010

주물사는 규사에 벤토나이트나 resin 등의 점결제를 첨가한 것으로써 주물제품의 생산을 위한 주형에 사용되고 있다. 주물업체에서 반복적으로 사용된 주물사는 결국 열에 의해 파쇄되어 그 기능을 상실하며 폐주물사로 전락된다. 폐주물사는 점결제의 성분 및 함량에 따라 지정 또는 일반폐기물로 처분되고 있지만 주물사의 주종을 이루는 규사는 열에 의해 변성되지 않는 성질로 인하여 적절한 처리를 통하여 재사용이 가능하다. 본 연구에서는 국내 외 폐주물사의 발생 및 처리, 재활용현황, 그리고 재활용에 관련된 제도 및 재활용을 저해하는 요인 등을 조사하여 문제점을 도출하고 폐주물사의 재활용 활성화 방안을 제시하였다.

• 한국주조공학회지
• /
• 제12권6호
• /
• pp.471-479
• /
• 1992

For the last 2 decades, the bonding materials for the foundry sand and the foundry equipments with high performance have been developed and employed in the foundry shops. In those periods, the furan resins hardened in higher temperature have been replaced with the self-hardened ones in the room temperature. Simultaneously the various reclamation methods of the self-hardened furan resin sand have been developed in order to get the clean working environments, the reduction of solid wastes and the lower of production cost in the foundry. In this experimental study, the combustion reclamation method using the fluidized bed among the various methods was studied in order to reduce the L.O.I. and /or $N_2$ gas due to the deposition of the furan resins and the hardeners. Comparing the results of this experimental combustion reclamation method with those of the employed pneumatic method, the Surface Stability Index of the specimen made by combustion method is 30% higher than that of the latter one and L.O.I. decreases about 30%. The reclamation temperature of 650$^{\circ}C$ in this experimental fluidized bed would be recommended in the viewpoints of the reclamation period, the fuel consumption and the residual quantity of the furan resin. The formula determining the minimum fluidizing velocities according to the temperatures in the fluidized bed has been obtained.