• Korean Journal of Environmental Agriculture
• /
• v.1 no.1
• /
• pp.65-70
• /
• 1982

This experiment was conducted to see the effect of repeated application of IBP granular formulation(17%, 0,0-diisopropyl-S-benzyl thiophosphate) on the biodegradation of IBP and diazinon〔0,0-diethyl 0-(2-isopropyl-4-methyl-5-pyrimidinyl) phosphorothioate〕 in silt loam soil with 2.1% organic matter under flooded condition. The persistence of IBP in the soil was shortened by increasing the frequencies of application of the chemical. Enhanced degradation ability in the soil caused by repeated application of IBP was prolonged about 53 days, while the ability did not influence diazinon persistence in the soil. The half-lives of IBP in sterilized soil autoclaved at $121^{\circ}C$ for 30 minutes were about 3 times longer than those in viable soil, suggesting that microbial process was a major factor for IBP degradation in the soil. The total colony number of soil microbes showed little difference between the soils with and without repeated application of IBP. A possible concern of specific soil microorganisms on the pesticide degradation in soil was discussed.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.47
• /
• pp.299-318
• /
• 2010

International trade environment is rapidly changing. Developing all economic activities included in the value chain of economy out of a particular country or region in the trends where globalization is spreading all over the world, 'a borderless world' has been created and become common throughout the world. Especially, in case of East Asian region, becoming the factory of the world, China has become a center of the world's economic activities in recent years; and the increase of regional investment among East Asian countries and trade expansion focused on China has been the factor of promoting the formulation of a regional trade network. SCM is an efficient way of adaptation to the complexity or uncertainty on the scene through the achievement of a sustainable competitive advantage by integrating the activities of improving the relationships in the supply chain. In this study, Sumitronics, a Japanese company, was studied as a case of the company who had implemented SCM effectively and efficiently utilizing the East Asian trade network. Not being engaged in the manufacturing processes in the headquarter, Sumitronics has implemented SCM which is capable of maximizing the responsiveness upon the requirements of customers by effective information sharing. In particular, the profits of the company have been maximized through SCM by its headquarter in Japan, which is capable of managing each base in East Asia as China and Southeast Asia, etc. Korean companies may also be able to create a new source of profit by dint of establishing SCM as such. The results of this case study has revealed that the implementation of an effective business model is the key of the successful implementation of SCM.

• The Korean Journal of Pesticide Science
• /
• v.12 no.2
• /
• pp.118-126
• /
• 2008

In order to find the best compositions of the dimethomorph formulation containing fatty alcohol ethoxylate surfactants as an activator adjuvant and recommend the good management way of the formulations to allow an intended uptake rate, factors affecting foliar uptake of active ingredients into cucumber were investigated and compared each other. Among tested, the most important factors were air temperature in which plants were located after spraying of aqueous formulations containing activator adjuvant, and deposit of wax on the leaf surface of cucumber. Dimethomorph uptake was found to be increased by sunlight. When aqueous formulations had long-polyethoxylated fatty alcohol surfactants, the relative humidity of the room in which the plants were located after spraying with the formulations did not severely influence the foliar uptake. Maintaining a mild temperature and avoiding too strong sunlight after spraying with dimethomorph formulations were found to be resonable management strategies.

• Journal of Aerospace System Engineering
• /
• v.12 no.5
• /
• pp.54-68
• /
• 2018

The objective of this study is to analyze the effect of dynamic characteristics of the check valve applied to the small piezoelectric-hydraulic pumps on flow rate formation. The flow rate of the piezoelectric-hydraulic pump is a key factor in the formation of the load pressure to operate the brake system. At this time, the natural frequency of the check valve operating in the fluid has a great influence on the formulation of the flow rate of the piezoelectric-hydraulic pump. In addition, the natural frequency of the check valve is affected by the gap between the check valve and the pump seat. In this study, the natural frequency of the check valve according to the gap between the check valve and the pump seat was calculated through the fluid-structure interaction analysis. The flow rate obtained from the simulation result was verified by comparing it with the result from the flow rate experiment using the developed piezoelectric-hydraulic pump.

• Structural Engineering and Mechanics
• /
• v.74 no.1
• /
• pp.1-18
• /
• 2020

For the large deformation of shear walls under vertical and horizontal loads, there are difficulties in obtaining accurate simulation results using the response analysis method, even with fine mesh elements. Furthermore, concrete material nonlinearity, stiffness degradation, concrete cracking and crushing, and steel bar damage may occur during the large deformation of reinforced concrete (RC) shear walls. Matrix operations that are involved in nonlinear analysis using the traditional finite-element method (FEM) may also result in flaws, and may thus lead to serious errors. To solve these problems, a planar four-node element was developed based on vector mechanics. Owing to particle-based formulation along the path element, the method does not require repeated constructions of a global stiffness matrix for the nonlinear behavior of the structure. The nonlinear concrete constitutive model and bilinear steel material model are integrated with the developed element, to ensure that large deformation and damage behavior can be addressed. For verification, simulation analyses were performed to obtain experimental results on an RC shear wall subjected to a monotonically increasing lateral load with a constant vertical load. To appropriately evaluate the parameters, investigations were conducted on the loading speed, meshing dimension, and the damping factor, because vector mechanics is based on the equation of motion. The static problem was then verified to obtain a stable solution by employing a balanced equation of motion. Using the parameters obtained, the simulated pushover response, including the bearing capacity, deformation ability, curvature development, and energy dissipation, were found to be in accordance with the experimental observation. This study demonstrated the potential of the developed planar element for simulating the entire process of large deformation and damage behavior in RC shear walls.

• Journal of Adhesion and Interface
• /
• v.13 no.1
• /
• pp.38-44
• /
• 2012

Surface properties and curing behavior of UV-initiated photopolymerization with and without wax have been investigated by pendulum hardness, pencil hardness, gloss, photo-differential scanning calorimetry (photo-DSC) and SEM. In addition, the influence of wax type (paraffin wax, PE wax) on the various properties of UV cured films was studied. The results showed that the wax type was the significant factor affecting gloss and surface hardness of UV cured films. Specially, the photo-DSC results showed that ${\Delta}H$ for the UV cured films containing paraffin wax was higher than the corresponding values for the formulation without wax and with PE wax. The observed results clearly demonstrate that the photopolymerization of UV curing with paraffin wax in an air atmosphere is less inhibited by the oxygen compared to UV curing without wax and with PE wax.

• The Plant Pathology Journal
• /
• v.32 no.5
• /
• pp.414-422
• /
• 2016

Eucalyptus dieback disease, caused by Cylindrocladium scoparium, has occurred in last few years in large Eucalyptus planting areas in China and other countries. Rapid, simple, and reliable diagnostic techniques are desired for the early detection of Eucalyptus dieback of C. scoparium prior to formulation of efficient control plan. For this purpose, three PCR-based methods of nested PCR, multiplex PCR, loop-mediated isothermal amplification (LAMP) were developed for detection of C. scoparium based on factor 1-alpha (tef1) and beta-tubulin gene in this study. All of the three methods showed highly specific to C. scoparium. The sensitivities of the nested PCR and LAMP were much higher than the multiplex PCR. The sensitivity of multiplex PCR was also higher than regular PCR. C. scoparium could be detected within 60 min from infected Eucalyptus plants by LAMP, while at least 2 h was needed by the rest two methods. Using different Eucalyptus tissues as samples for C. scoparium detection, all of the three PCR-based methods showed much better detection results than regular PCR. Base on the results from this study, we concluded that any of the three PCR-based methods could be used as diagnostic technology for the development of efficient strategies of Eucalyptus dieback disease control. Particularly, LAMP was the most practical method in field application because of its one-step and rapid reaction, simple operation, single-tube utilization, and simple visualization of amplification products.

• Computers and Concrete
• /
• v.20 no.6
• /
• pp.635-643
• /
• 2017

The rehabilitation and strengthening of concrete structures using Fiber-Reinforced Polymer (FRP) materials have been widely investigated. As a priority issue, however, the effect of curing conditions on the bonding behavior between FRP and concrete structures is still elusive. This study aims at developing a prediction model to accurately capture the mode-II interfacial debonding between FRP strips and concrete under different curing conditions. Single shear debonding experiments were conducted on FRP-concrete samples with respect to different curing time t and temperatures T. The J-integral formulation and constrained least square minimization are carried out to calibrate the parameters, i.e., the maximum slip $\bar{s}$ and stretch factor n. The prediction model is developed based on the cohesive model and Arrhenius relationship. The experimental data are then analyzed using the proposed model to predict the debonding between FRP and concrete, i.e., the interfacial shear stress-slip relationship. A Finite Element (FE) model is developed to validate the theoretical predictions. Satisfactory agreements are obtained. The prediction model can be used to accurately capture the bonding performance of FRP-concrete structures.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.4
• /
• pp.922-930
• /
• 2021

This study was attempted to investigate the availability of nipa palm (Nypa fruticans Wurmb.) and finger root (Boesenbergia pandurata) extracts as natural cosmetic ingredients. For this, O/W cosmetic formulations with different compositions were prepared. The appearance of the cosmetic formulations was compared, and brightness and color values were measured using a colorimeter. Also, the pH, viscosity, and texture of the cosmetic formulations with different compositions were measured, and the effects of the extracts on the properties of the cosmetic formulations were examined. Finally, the UV transmittance and sun protection factor (SPF) index were observed, and the results confirmed the availability of finger root extract as a natural ingredient for UV protection.

• Food Engineering Progress
• /
• v.14 no.3
• /
• pp.256-262
• /
• 2010

Saururus chinensis powder was added into cookie dough at 5 levels (0%, 1.5%, 3%, 4.5%, and 6%) by partially replacing equivalent amount of wheat flour in cookie formulation, and cookies thus made were evaluated for physicochemical properties and sensory quality by a small semi-trained panel. Thickness and density of cookies increased significantly with increase in Saururus chinensis powder content (p<0.05); however, those of dough were not affected (p<0.05). The pH of both dough and cookies decreased significantly as the level of Saururus chinensis powder increased (p<0.05). Lightness and yellowness decreased significantly as the Saururus chinensis powder content increased while redness increased significantly (p<0.05). Spread factor decreased with the powder addition (p<0.05). Sensory evaluation indicated that samples with higher amount of the powder received higher scores in terms of taste, flavor, and color but not for hardness (p<0.05). Finally, correlation analysis showed that level of Saururus chinensis powder incorporation was well-correlated with most of the physicochemical properties and sensory attributes studied.