• Journal of Satellite, Information and Communications
• /
• v.3 no.1
• /
• pp.35-40
• /
• 2008

In this paper, a new analytical formulation is presented for calculating shielding effectiveness (SE) of shielding enclosure including satellite electronic components and equipments. The shielding enclosure has a dielectric-backed aperture. The SE may be a function of frequency, dielectric constant, and position within the enclosure. And, the formulation has been extended for calculation of the SE of the structure where the one side of dielectric is partially backed by conductor. Our simulation results give that the dielectric material lowers the Q factor, and the further the observation point is from the aperture, the more SE increases.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.7 no.3
• /
• pp.270-277
• /
• 1983

Plastic plane stress solutions are given for a center cracked strip, characterized by the Ramberg-Osgood plastic index, under bi-axial tension. Using a power law hardening stress-strain relation, an incremental plasticity finite element formulation is developed, and simple formulation is given for computing J-integral with nodal displacements. The near tip angular distribution of von Mises effective stress doesn't differ significantly in magnitude according to the change of loading stress and bi-axial load combination factor. But, for smaller plastic index, the location of its maximum value moves vertically at a head of crack. J-integral value, in the plastic zone near crack tip, decreases with load combination factor for large and small plastic index.

• Structural Engineering and Mechanics
• /
• v.22 no.5
• /
• pp.613-629
• /
• 2006

In this paper a recently developed scaled boundary finite element method (SBFEM) is applied to simulate stress concentration for two-dimensional structures. In addition, a simple and independent formulation for evaluating the coefficients, not only of the singular term but also higher order non-singular terms, of the stress fields near crack-tip is presented. The formulation is formed by comparing the displacement along the radial points ahead of the crack-tip with that of standard Williams' eigenfunction solution for the crack-tip. The validity of the formulation is examined by numerical examples with different geometries for a range of crack sizes. The results show good agreement with available solutions in literatures. Based on the results of the study, it is conformed that the proposed numerical method can be applied to simulate stress concentrations in both cracked and uncracked structure components more easily with relatively coarse and simple model than other computational methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.4
• /
• pp.2093-2103
• /
• 2014

The purpose of this study is to investigate how the vendor suitability factor affects ERP introduction factors of domestic small and middle businesses and internal performance. When domestic firms introduce an ERP package, they mostly use the package already developed by ERP firms. Therefore, this study tried to analyze that the suitability factor of an ERP package supplier serves as a moderating role for ERP internal performance. The study result showed that the vendor suitability factor played a moderating role for ERP introduction factors and internal performance. In other words, the vendor suitability factor served a moderating role for four factors -CEO support, education/training, users' IT capability, and business standardization /formulation- and internal performance. But, it was analyzed that the vendor suitability factor didn't serve as a moderating role for IT infrastructure and internal performance.

• Archives of Pharmacal Research
• /
• v.24 no.4
• /
• pp.355-359
• /
• 2001

A novel HPLC method with electrochemical detection has been developed for the determination of recombinant human epidermal growth factor (rhEGF) in pharmaceutical products. rhEGF was separated from other components in formulation on a reversed-phase C18 column with 24% acetonitrile in 0.1 M phosphate buffer (pH 4.75). The optimum electrochemical oxidation of EGF was obtained at 0.85 V vs. Ag/AgCl in a glassy carbon working electrode due to electroactive tyrosine, tryptophan, methionine, and arginine residues. The quantitation range was from 1.0 to 200 ng of rhEGF with the linear correlation coefficient greater than 0.999. The method was successfully applied for the quantitation of rhEGF in a pharmaceutical preparation.

• Structural Engineering and Mechanics
• /
• v.18 no.6
• /
• pp.807-829
• /
• 2004

The Element-Based Lagrangian Formulation of a 9-node resultant-stress shell element is presented for the isotropic and anisotropic composite material. The effect of the coupling term between the bending strain and displacement has been investigated in the warping problem. The strains, stresses and constitutive equations based on the natural co-ordinate have been used throughout the Element-Based Lagrangian Formulation of the present shell element which offers an advantage of easy implementation compared with the traditional Lagrangian Formulation. The element is free of both membrane and shear locking behavior by using the assumed natural strain method such that the element performs very well in thin shell problems. In composite plates and shells, the transverse shear stiffness is defined by an equilibrium approach instead of using the shear correction factor. The arc-length control method is used to trace complex equilibrium paths in thin shell applications. Several numerical analyses are presented and discussed in order to investigate the capabilities of the present shell element. The results showed very good agreement compared with well-established formulations in the literature.

• Proceedings of the PSK Conference
• /
• 2001.04a
• /
• pp.223.1-223.1
• /
• 2001

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.3_4
• /
• pp.82-89
• /
• 1995

The efforts of formulation have been reviewed and the results of existing laboratory experiments are investigated in order to describe the contracted flow which occurs at the final closure of sea dike construction. The regional characteristics of contracted flow is analyzed by checking the drawdown curve, and Chezy's mean velocity equation is employed to estimate the discharge rate at the closure. Weir-type discharge equations are reviewed, which are derived from Bernoulli equation, and the problems of the equations are discussed. Chezy's mean velocity equation is considered to be widely and generally applicable, and the empirical factor introduced in Chezy's equation is named 'form drag factor' since it is primarily dependent on the form drag caused by the contraction of discharge area. Laboratory experiments were conducted mainly in order to investigate the variation of form drag factor against various parameters, and an empirical equation is developed for the estimation of form drag factor.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.6
• /
• pp.550-555
• /
• 2007

Stress intensity factor is one of the most important parameters in fracture mechanics. Both the stress field distribution and the crack propagation are closely related to these parameters. Due to the complexity of actual engineering problems, it is difficult to calculate the stress intensity factor by theoretical formulation, so photoelasticity method is a good choice. In this paper, modified two parameter method is employed to calculate stress intensity factor for opening mode by using data from more than one photoelastic fringe loop. For getting accurate experiment results, the initial fringes are doubled and sharpened by digital image programs from the fringe patterns obtained by a CCD camera. Photoelastic results are compared with those obtained by the use of empirical equation and FEM. Good agreement shows that the methods utilized in experiments are considerably reliable. The photoelastic experiment can be used for bench mark in theoretical study and other experiments.

• KSBB Journal
• /
• v.32 no.2
• /
• pp.108-116
• /
• 2017

Omeprazole, a benzimidazole derivative, suppresses gastric acid secretion by inhibiting $H^+/K^+$ ATPase in gastric parietals cells, and by reducing $H^+$ concentration. To improve stability of esomeprazole magnesium dihydrate (ESMD), enteric-coated preperation was composed of core tablet, subcoating and enteric coating layer. We were evaluated in vitro dissolution characteristics between test and reference ESMD preparation and stability. We could prepare enteric-coated formulation of ESMD by controlling disintegrating agent and coating ratio which could rapidly dissolved in neutral or alkali medium. The formulation D5 with crospovidone of 1.25% and coating ratio of 16.25% had a similar dissolution behavior compare to reference preparation. Difference factor ($f_1$) and similarity factor ($f_2$) were 0~15 and 50~100 and there was no significant difference in bioequivalence between formulations. The content and dissolution rate of formulation D5 were $96.54{\pm}0.21$ and $78.56{\pm}0.87%$ without change of color in accelerated condition ($40^{\circ}C$, RH 75%, high density polyethylene (HDPE) container) for 6 months. This study concluded that our enteric coated preparation of ESMD could be an useful method to improve stability of unstable drug without direct contact with coating material.