• Journal of Adhesion and Interface
• /
• v.18 no.2
• /
• pp.75-81
• /
• 2017

In this study, we synthesized mesoporous carbon (Carbonized Ni-FDU-15) containing nanoporous structures and magnetic nanoparticles. Carbonized Ni-FDU-15 was synthesized via evaporation-induced self-assembly (EISA) and direct carbonization by using a triblock copolymer (F127) as a structure-directing agent, a resol precursor as a carbon-pore wall forming material, and nickel (II) nitrate as a metal ion source. The mesoporous carbon has a well-ordered two-dimensional hexagonal structure. Meanwhile, nickel (Ni) metal and nickel oxide (NiO) were produced in the magnetic nanoparticles in the pore wall. The size of the nanoparticles was about 37 nm. The surface area, pore size and pore volume of Carbonized Ni-FDU-15 were $558m^2g^{-1}$, $22.5{\AA}$ and $0.5cm^3g^{-1}$, respectively. Carbonized Ni-FDU-15 was found to move in the direction of magnetic force when magnetic force was externally applied. The magnetic nanoparticle-bearing mesoporous carbons are expected to have high applicability in a wide variety of applications such as adsorption/separation, magnetic storage media, ferrofluid, magnetic resonance imaging (MRI) and drug targeting, etc.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.3
• /
• pp.202-205
• /
• 2010

Introduction: The aim of the present study was to investigate the effect of mechanical irrigation in combination with mouthwash of antimicrobial agents on salivary bacterial counts. Materials and Methods: This study was performed with a randomized study employing a panel of 40 healthy volunteers (20 males and 20 females) between the age of 26 and 32 years. Volunteers were randomly put in one of four treatment groups. In the first group, 0.2 mL of non-stimulatory saliva was collected from every subjective person. Then, saliva was collected after rinsing with chlorhexidine (CHX) for 1 minute. In the second group, non-stimulatory saliva was collected, and then saliva was collected after rinsing with CHX and irrigation with saline. In the third and fourth groups, the same procedures as the first and second groups were performed with povidone iodine (PVI) instead of CHX. All of these samples were cultured for 48 hours aerobically. The reduction rates of colony-forming units (CFU) were calculated for each group. The reduction rate between each group was tested statistically using student t-test. Results: Using CHX in combination with saline irrigation showed a significant decrease of the salivary bacterial CFU when compared with only using CHX.(P<0.01) And using PVI with saline irrigation showed a little decrease of the CFU when compared with only using PVI, but there was no statistical significance.(P>0.01) Conclusion: It was concluded that the CHX or PVI used with saline irrigation made the salivary bacterial counts reduced more than when CHX or PVI was used alone as an oral antiseptic agent.

• Biomolecules & Therapeutics
• /
• v.23 no.4
• /
• pp.367-373
• /
• 2015

Cordyceps species including Cordyceps bassiana are a notable anti-cancer dietary supplement. Previously, we identified several compounds with anti-cancer activity from the butanol fraction (Cb-BF) of Cordyceps bassiana. To expand the structural value of Cb-BF-derived anti-cancer drugs, we employed various chemical moieties to produce a novel Cb-BF-derived chemical derivative, KTH-13-amine-monophenyl [4-isopropyl-2-(1-phenylethyl) aniline (KTH-13-AMP)], which we tested for anti-cancer activity. KTH-13-AMP suppressed the proliferation of MDA-MB-231, HeLa, and C6 glioma cells. KTH-13-AMP also dose-dependently induced morphological changes in C6 glioma cells and time-dependently increased the level of early apoptotic cells stained with annexin V-FITC. Furthermore, the levels of the active full-length forms of caspase-3 and caspase-9 were increased. In contrast, the levels of total forms of caspases-3, caspase-8, caspase-9, and Bcl-2 were decreased in KTH-13-AMP treated-cells. We also confirmed that the phosphorylation of STAT3, Src, and PI3K/p85, which is linked to cell survival, was diminished by treatment with KTH-13-AMP. Therefore, these results strongly suggest that this compound can be used to guide the development of an anti-cancer drug or serve as a lead compound in forming another strong anti-proliferative agent.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.3
• /
• pp.478-485
• /
• 2014

This study is to form the self assembly of cubic crystalline phase to penetrate into the skin epidermis. The various performance synthesized diglyceryl phytylacetate (DGPA) having hydroxyl group (-OH) and 4 methyl chains with phytyl group was carried out as an amphoteric lipid such as emulsifying power, self assembly. Emulsifying activity of DGPA was very stabilized on only 1% of small content, it could make a W/O emulsion containing high internal phase incorporated with water. Cubic liquid crystal structure with DGPA on three-phase diagram was formed, when mixed DGPA, dimethicone (2CS), and water. Through three-phase diagram forming the cubic liquid crystal area, hexagonal structure zone, and mixing water phase and hexagonal structure area, reversed micelle area were respectively certified. Its structure was proved by the SAXS (small angled x-ray scattering) analysis. As an application, formation of cubosome containing 10% of magnesium ascorbylphosphate and 5% of pyridoxine tris-hexyldecanoate was encapsulated. Occlusive effect of cubosome had above 1.7 times better than reversed micelle. From using poloxamer of dispersing agent, phase structure recovered from W/O emulsion to cubic liquid crystal phase when storage in $33^{\circ}C$ incubator. Therefore, our this study is expected to be as epidermal-dermal skin absorbers in skin care cosmetics and pharmaceuticals industries as raw materials to form a cubic crystal phase through a more in-depth research to DGPA having amphoteric lipid property.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.3
• /
• pp.89-95
• /
• 2022

In this study, glassy carbon coating was performed on the graphite using a phenolic resin and a curing agent was mixed with ethylene glycol as an additive to form the uniform surface. The phenolic resin was dried and cured under the environments of hot air, then converted into a glassy carbon layer by pyrolysis at 500~1,500℃. FTIR, XRD, SEM analysis, and density/porosity/contact angle measurement were performed for characterization of glassy carbon. The pyrolysis temperature for high-quality glassy carbon was optimized to be about 1,000℃. As the content of the additive increased, the effect of reducing surface defects on the coated surface, reduction of porosity, increase of contact angle, and increase of density were investigated in this study. The method of forming a glassy carbon coating layer through an additive is expected to be applicable to graphite coating and other fields.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.6
• /
• pp.503-516
• /
• 2021

Autonomous fire detection and suppression system requires advanced technology for complex detection technology and injection/control technology for accurate hitting by fire location. Also, foam spraying should be included to respond to oil fires. However, when a single spray monitor is used in common, water and foam spray properties appear different, so for accurate fire suppression, research on the spray trajectory and distance will be required. In this study, experimental studies and numerical analysis studies were combined to analyze the foam spray characteristics through the spray monitor developed for the establishment of an autonomous fire extinguishing system. For flow analysis of foam injection, modeling was performed using OpenFOAM analysis software, and the commonly used foaming agent (Aqueous Film-Forming Foam) was applied for foam properties. The injection distance analysis was performed according to the injection pressure and the injection angle according to the form of the foam, and at the same time, the results were verified and presented through the injection experiment.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.31 no.4
• /
• pp.182-189
• /
• 2021

Porous ceramics were manufactured using the foaming method for the development of inorganic insulating materials. Silica fume and SiO₂ were used as main raw materials, and bentonite was used as a rapid setting agent for uniform structure formation of porous ceramics. The porous ceramics were sintered at 1200℃, and porosity, density, compressive strength, microstructure and thermal conductivity were analyzed. As the content of silica fume to SiO₂ of the porous ceramics increased 70 to 90 %, the specific gravity increased from 0.63 to 0.69, and the compressive strength increased from 9.41 Mpa to 12.86 Mpa. But, the porosity showed a tendency to decrease from 72.07 % to 70.82 %, contrary to the specific gravity. As a result of measuring the thermal conductivity, the porous ceramic with a silica fume content of 70 % showed a thermal conductivity of 0.75 to 0.72 W/m·K at 25 to 800℃, respectively, and, another that a silica fume content of 90 % showed a 0.66~0.86 W/m·K. So the lower the silica f ume content, the lower the thermal conductivity, which was conf irmed to be consistent with porosity result. As a result of microstructure analysis using SEM (Scanning Electron Microscope), pores in the range of tens to hundreds ㎛ were observed inside and outside the porous ceramic, and it was confirmed that the pore distribution was relatively uniform.

• Science of Emotion and Sensibility
• /
• v.25 no.3
• /
• pp.15-32
• /
• 2022

This study seeks to clarify the mechanisms of anthropomorphism and positive user experience. This study adopts the "computers are social actors" (CASA) paradigm to verify the causal relationship between social response and anthropomorphism and correctly explicate this paradigm. The intimacy-forming and anthropomorphizing effects of deep self-disclosure in interpersonal relationships were replicated in relationships between humans and conversational agents to induce both social response and anthropomorphism. Then, the mediating effect of intimacy on the anthropomorphizing effect of deep self-disclosure was explored with psychological models that revealed the causal relationships between social connections, including intimacy and anthropomorphism. Furthermore, we explored how intimacy and anthropomorphism trigger positive user experiences. The results demonstrated that the deeper the self-disclosure depth was, the more intimate and humanly the agent was perceived and the more positive the user experience was. In addition, the effect of self-disclosure depth on anthropomorphism and positive user experience was completely mediated by intimacy. This means that when using a computer with interpersonal characteristics, people anthropomorphize it and have a positive experience because people react socially to objects with social cues. This study bridges the gap between the CASA paradigm and anthropomorphism research, suggesting the possibility of psychological explanations for the principle of human-computer interactions. In addition, it explicates the mechanism of anthropomorphism and positive user experience, emphasizing the importance of social response-that is, intimacy.

• Journal of Veterinary Science
• /
• v.24 no.3
• /
• pp.44.1-44.17
• /
• 2023

Background: Antibiotic resistance is a significant public health concern around the globe. Antimicrobial peptides exhibit broad-spectrum and efficient antibacterial activity with an added advantage of low drug resistance. The higher water content and 3D network structure of the hydrogels are beneficial for maintaining antimicrobial peptide activity and help to prevent degradation. The antimicrobial peptide released from hydrogels also hasten the local wound healing by promoting epithelial tissue regeneration and granulation tissue formation. Objective: This study aimed at developing sodium alginate based hydrogel loaded with a novel antimicrobial peptide Chol-37(F34-R) and to investigate the characteristics in vitro and in vivo as an alternative antibacterial wound dressing to treat infectious wounds. Methods: Hydrogels were developed and optimized by varying the concentrations of crosslinkers and subjected to various characterization tests like cross-sectional morphology, swelling index, percent water contents, water retention ratio, drug release and antibacterial activity in vitro, and Pseudomonas aeruginosa infected wound mice model in vivo. Results: The results indicated that the hydrogel C proved superior in terms of cross-sectional morphology having uniformly sized interconnected pores, a good swelling index, with the capacity to retain a higher quantity of water. Furthermore, the optimized hydrogel has been found to exert a significant antimicrobial activity against bacteria and was also found to prevent bacterial infiltration into the wound site due to forming an impermeable barrier between the wound bed and external environment. The optimized hydrogel was found to significantly hasten skin regeneration in animal models when compared to other treatments in addition to strong inhibitory effect on the release of pro-inflammatory cytokines (interleukin-1β and tumor necrosis factor-α). Conclusions: Our results suggest that sodium alginate -based hydrogels loaded with Chol-37(F34-R) hold the potential to be used as an alternative to conventional antibiotics in treating infectious skin wounds.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.215-229
• /
• 2023

Objectives: To validate the effectiveness of a real-time chemical exposure monitoring system developed by KOSHA (Korea Occupational Safety and Health Agency), we applied the system to a workplace in the electronics industry for 153 days. Methods: The monitoring system consisted of a PID chemical sensor, a LTE communication equipment, and a web-based platform. To monitor chemical exposure, four sets of sensors were placed in two manufacturing tasks - inspection and jig cleaning - which used TCE as a degreasing agent. We reviewed previous reports of work environment measurements and conducted a new work environment measurement on one day during the period. The PID sensor systems detected the chemical exposure levels in the workplace every second and transmitted it to the platform. Daily average and maximum chemical exposure levels were also recorded. Results: We compared the results from the real-time monitoring system and the work environment measurement by traditional methods. Generally, the data from the real-time monitoring system showed a higher level because the sensors were closer to the chemical source. We found that 28% of jig cleaning task data exceeded the STEL. Peak exposure levels of sensor data were useful for understanding the characteristics of the task's chemical use. Limitations and implications were reviewed for the adoption of the system for preventing poisoning caused by chemical substances. Conclusions: We found that the real-time chemical exposure monitoring system was an efficient tool for preventing occupational diseases caused by chemical exposure, such as acute poisoning. Further research is needed to improve the reliability and applicability of the system. We also believe that forming a social consensus around the system is essential.