• Bulletin of the Korean Chemical Society
• /
• 제28권7호
• /
• pp.1119-1126
• /
• 2007

Hydrogen gas and carbon nanotubes along with nanocarbon were produced from commercial natural gas using fixed bed catalyst reactor system. The maximum amount of carbon (491 g/g of catalyst) formation was achieved on 25% Ni, 3% Cu supported catalyst without formation of CO/CO2. Pure carbon nanotubes with length of 308 nm having balloon and horn type shapes were also formed at 673 K. Three sets of catalysts were prepared by varying the concentration of Ni in the first set, Cu concentration in the second set and doping with K in the third set to investigate the effect on stabilization of the catalyst and production of carbon nanotubes and hydrogen by copper and potassium doping. Particle size analysis revealed that most of the catalyst particles are in the range of 20-35 nm. All the catalysts were characterized using powder XRD, SEM/EDX, TPR, CHN, BET and CO-chemisorption. These studies indicate that surface geometry is modified electronically with the formation of different Ni, Cu and K phases, consequently, increasing the surface reactivity of the catalyst and in turn the Carbon nanotubes/H2 production. The addition of Cu and K enhances the catalyst dispersion with the increase in Ni loadings and maximum dispersion is achieved on 25% Ni: 3% Cu/Al catalyst. Clearly, the effect of particle size coupled with specific surface geometry on the production of hydrogen gas and carbon nanotubes prevails. Addition of K increases the catalyst stability with decrease in carbon formation, due to its interaction with Cu and Ni, masking Ni and Ni:Cu active sites.

• Journal of Periodontal and Implant Science
• /
• 제36권2호
• /
• pp.289-303
• /
• 2006

This study was performed to evaluate the effect of bone graft materials including demineralized freeze-dried bone, freeze-dried bone, deproteinized bovine bone on space-making capacity and bone formation in guided bone regeneration with titanium reinforced ePTFE membrane(TR-ePTFE). Adult male rabbits(mean BW 2kg) were used in this study. Intramarrow penetration defects were surgically created with round bur on calvaria of rabbits. TR-ePTFE membrane was adapted to calvarial defect and bone graft materials were placed. Animals were sacrificed at 2, 8, 12 weeks after surgery. Non-decalcified specimens were processed for histologic analysis and prepared with Villaneuva bone stain. The results of this study were as follows: 1. TR-ePTFE membrane was biocompatible and capable of maintaining the space-making. 2. Tissue integration was not good at TR-ePTFE membrane. Fixation was not enough. so, wound stabilization was not good. 3. In animals using deproteinized bovine bone, demineralized freeze-dried bone, bone formation was little. 4. In animals using freeze-dried bone, bone formation was better. Within the above results, bone formation may be inhibited when wound stabilizafion was not good.

• 한국농촌건축학회논문집
• /
• 제24권4호
• /
• pp.133-139
• /
• 2022

This study deals with the formation of Jongyeonbangjeok's Gwangju Factory in the 1930's to 80's, and the findings are shown below: In the period of formation, the factory was rectangular-shaped from north to south, and the structure was located at the center of the site, and in the east of it, there was a dormitory connected from south to north. The building was arranged with an open area on the south. In the east of the site where company houses were located, same-sized structures were arranged along the axis.In the period of change, the factory was restored about the damage from the Korean War, and it went through the process of division into two companies. As a result, the factory in the center of the site was divided into left and right ones, and the dormitory and the group of company houses were, too, divided into two, so division was made largely into southern and northern parts. In the period of stabilization, along with factory extension in each of the companies, welfare for factory workers was expanded by building more houses or opening sport facilities. After the 1980's, too, the existing factories were either extended or remodeled according to the induction of equipment, and some showed changes in their functions due to a fire or such.

• Mass Spectrometry Letters
• /
• 제7권1호
• /
• pp.16-20
• /
• 2016

Characterization of intact protein structures in the gas phase using electrospray ionization combined with ion mobility mass spectrometry has become an important tool of research. However, the biophysical properties that govern the structures of protein ions in the gas phase remain to be understood. Here, we investigated the impact of host-guest complexation of ubiquitin (Ubq) with macrocyclic host molecules, cucurbit[n]urils (CB[n]s, n = 6, 7), on its structure in the gas phase. We found that CB[n] complexation induces the formation of compact Ubq ions. Both CB[6] and CB[7] exhibited similar effects despite differences in their binding properties in solution. In addition, CB[n] attachment prevented Ubq from unfolding by collisional activation. Based on the experimental results, we suggest that CB[n]s prevent unfolding of Ubq during transfer to the gas phase to promote the formation of compact protein ions. Furthermore, interaction with positively charged residues per se is suggested to be the most important factor for the host-guest complexation effect.

• 한국미생물·생명공학회지
• /
• 제28권1호
• /
• pp.26-32
• /
• 2000

Electrostatic forces contribute to the high degree of enzyme transition state complementarity in enzyme catalyzed reaction and such forces are modified by the solvent through its dielectric constant and polar properties. The contributions of electrostatic interaction to the formation of ES complex and the stabilization of transition state of the trypsin catalyzed reaction were probed by kinetic studied with high pressure and solvent dielectric constant. A good correlation has been observed between the increase of catalytic efficiency of trypsin and the decrease of solvent dielectric constant. Activation volume linearly decreased as the dielectric constant of solvent decreased, which means the increase in the reaction rae. Moreover, the decrease of activation volume by lowering the solvent dielectric constant implies a solvent penetration of the active with and a reduction of electrostatic energy for the formation of dipole of the active site oxyanion hole. When the 야electric constant of the solvents was lowered to 4.7 unit, the loss of activation energy and that of free energy of activation were 2.262 KJ/mol and 3.169 KJ/mol, respectively. The results of this study indicate that the high pressure kinetics combined with solvent effects can provide unique information on enzyme reaction mechanisms, and the controlling the solvent dielectric constant can stabilize the transition state of the trypsin-catalyzed reaction.

• 한국분무공학회지
• /
• 제8권3호
• /
• pp.33-40
• /
• 2003

The low-emission and high-performance diesel combustion is an important issue in the combustion research community, In order to understand the detailed diesel flame involving the complex physical processes, it is quite desirable to diesel spray dynamics, auto-ignition and spray flame propagation. Dynamics of fuel spray is a crucial element for air-fuel mixture formation, flame stabilization and pollutant formation, In the present study, the diesel RCM (Rapid Compression Machine) and the Electric Control injection system have been designed and developed to investigate the effects of injection pressure, injection timing, and intake air temperature on spray dynamics and diesel combustion processes, In terms of the macroscopic spray combustion characteristics, it is observed that the fuel jet atomization and the droplet breakup processes become much faster by increasing the injection pressure and the spray angle, With increasing the cylinder pressure, there is a tendency that the of spray pattern in the downstream region tends to be spherical due to the increase of air density and the corresponding drag force, Effects of intake temperature and injection pressure on auto-ignition is experimently analysed and discussed in detail.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.447-452
• /
• 2000

The low-emission and high-performance diesel combustion is an important issue in the combustion research community. In order to understand the detailed diesel flame field involving the complex Physical Processes, It Is quite desirable to study diesel spray dynamics, auto-ignition and spray flame propagation. Dynamics of fuel spray is a crucial element for air-fuel mixture formation flame stabilization and pollutant formation. In the present study, the diesel RCM (Rapid Compression Machine) and the Electric Control injection system have been designed and developed to investigate the effects of injection Pressure, injection timing, and intake air temperature on spray dynamics and diesel combustion processes. In terms of the macroscopic spray combustion characteristics it is observed that the fuel jet atomization and the droplet breakup processes become much faster by increasing the injection pressure and the spray angle. With increasing the cylinder pressure there is a tendency that the shape of spray pattern in the downstream region tends to be spherical due to the increase of air density and the corresponding drag force. Effects of intake temperature and injection pressure on auto-ignition is experimently analysed and discussed in detail.

• KSBB Journal
• /
• 제14권4호
• /
• pp.403-407
• /
• 1999

식품이나 수질 내의 독성 물질 monitoring을 위해서 발광미생물인 P. phosphoreum이 많이 연구되고 있는데 이 독성 물질측정을 위하여 P. phosphoreum을 더 효과적으로 이요하기 위해 고정화하여 이용하는 방법을 연구하였다. 고정화 방법을 크게 4가지로 나누어서 그 방법에 따라 각각 고정화 물질 한가지씩을 선택하여 P. phosphoreum의 bioluminescence 안정성을 알아보았다. Polvacrylamide나 collagen에서는 bioluminescence가 유지를 못하고 material과 cell을 혼합하자마자 급격히 떨어졌으나 alginate와 k-carrageenan에서는 빛 안정성이 매우 좋았다. 그러나 k-carrageenan은 온도를 높여야 gel이 형성되는 성질을 갖고 있기 때문에 저온성 발광 미생물인 P. phosphoreum에는 적합한 고정화 물질이 되지 못한다. 따라서 P. phosphoreum의 bioluminescence를 안정되게 유지하면서 고정화가 용이한 polymer로는 alginate가 적합하다.

• Journal of Pharmaceutical Investigation
• /
• 제20권3호
• /
• pp.135-144
• /
• 1990

The effects of bile salts (BS) on the stability of dioleoylphosphatidylethanolamine (DOPE) liposomes were investigated, observing apparent absorbance of vacant liposomes and calcein release from entrapped liposomes. Unilamellar liposomes were prepared by using a small quantity of palmitoly-immunoglobulin G(IgG) ($2.5{\times}10^{-4}$ mo1/lipid mol) to stabilize the bilayer phase of the unsaturated DOPE which by itself does not form stable liposomes. The destabilization of PE immunoliposomes by papain, clearly demonstrates that the IgG is essential for stabilization of PE bilayer. Approximately 4% of the entrapped calcein was released from the PE liposomes after 1 hr from liposome formation. Calcein release and absorbance of liposomes depended on the BS/lipid ratio because of the solubilization of lipid molecule in bilayer and the formation of mixed micelles. At very low BS concentrations, the incorporation of BS induced BS/lipid aggregates in the outer vesicles monolayer, while high BS concentrations, mixed micelles were formed. Chelate and its conjugates as $3{\alpha},\;7{\alpha},\;12{\alpha}-trihydroxy$ BS induce the concentration of the $3{\alpha}$, $12{\alpha}-dihydroxy$ BS at half-maximal solubilization of immunoliposomes to approximately 2.5-, or 5-fold. Conjugation of BS with glycine or taurine slightly enhanced their capacities to perturb membranes.

• 한국응용과학기술학회지
• /
• 제21권4호
• /
• pp.279-288
• /
• 2004

Liquid crystal (LC) system was introduced into W/O emulsion in order to enhance the stability and moisturizing effect. The LC system, composed of beeswax, surfactant, and water was formed on the surface of emulsion droplet, which was investigated through a polarized microscope. The phenomenon that the viscosity in W/O emulsion system is decreased with time, was reduced by the formation of LC with the addition of beeswax. Centrifugal separation test showed that the stability of emulsion system was increased with the addition of beeswax to 3%. The color change of vitamin C was delayed in LC emulsion systems, which indicates stabilization effect against the oxidation of vitamin C. Evaporation rate in W/O emulsion was retarded by LC, so that high moisturizing effect is expected in W/O LC system.