• Proceedings of the Korean Environmental Health Society Conference
• /
• 2005.06a
• /
• pp.259-262
• /
• 2005

This study aims to identify the relationship between characteristics of aqueous organic matter and chlorination by-products formation potential according to temporal effect of Juam reservoir in Sun-Choen. The molecular weight distribution and chemical composition of precursors and their relationship with disinfection by-products(DBPs) were investigated. Most of the organic matters was responsible for the major DBP precursors in the raw water are small compounds with a molecular weight less than IKDa, Aromatic contents determined by SUVA correlated well with DBPs, THMs, and HAAs formation. Especially, THMFP/DOC showed better correlation with SUVA than HAAFP/DOC and DBPFP/DOC with SUVA in Juam reservoir. Therefore, effective removal of small molecules or hydrophobic organic matter prior to disinfection process will significantly reduce the DBP concentration in the finished water.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.9
• /
• pp.3267-3273
• /
• 2011

Ag(I) carboxylate gelators with mixed-ligands were systemically investigated to understand the mechanism of the organic gel formation. The gelators constructed 3-D networks of nanometer-sized thin fibers which facilitated gel formation in various aromatic organic solvents, even at very low concentrations. The loss of reflection peaks in the X-ray diffraction data indicated the reduction of strong interactions between the long alkyl chains as the Ag(I) carboxylates formed gels by maximizing their interactions with the organic solvents. The gelation temperature ($T_{gel}$) was measured to explore the interaction between the gelator molecules and solvents depending on their composition and concentration. Based on the gelation phenomena, a dissociation/re-association mechanism was proposed.

• Journal of the Korean Ceramic Society
• /
• v.29 no.1
• /
• pp.23-28
• /
• 1992

Alumina ceramics was reinforced by in-situ formation of La-${\beta}$-aluminate in ${\alpha}$-alumina matrix. The powder mixture of which composition is (100-12x)Al2O3+x(La2O3+11Al2O3) was prepared for the formation of La-${\beta}$-aluminate in ${\alpha}$-alumina matrix. The amount of La-${\beta}$-aluminate in the matrix was controlled by varing x which is number of moles. The dense composite was produced by sintering at 1600$^{\circ}C$ in air or hot-pressing at 1550$^{\circ}C$ under 30 MPa. Bending strength and fracture toughness were increased, resulting from the grain growth inhibition and the crack deflection and crack bridging mechanism when La-${\beta}$-aluminate was produced in ${\alpha}$-alumina matrix.

• Journal of the Korean Institute of Rural Architecture
• /
• v.7 no.1
• /
• pp.112-120
• /
• 2005

The object of this study is one of the traditional houses about Siheyuan(courtyard house) which is one of the most remarkable types of dwelling in China. The purpose of this paper is to examine and analyse the formation process of the Siheyuan. Its organizational formation process are based on historical and natural-geographical background. With the passage of time this house developed into one of the Chinese house style. The technique of Siheyuan's spatial composition goes so far back in the New Stone Age. The relics of this are the colony layout, the system of four sides, the layout type of a palace, the picture of lacquered ware, the picture of brick, the earthenware of house type, the painting of cave, the paintings of painters and others.

• Journal of the Korean institute of surface engineering
• /
• v.24 no.1
• /
• pp.18-24
• /
• 1991

In the present work the adhesion failure of a hot-dip galvanized coating has been studied as a function gas composition temperature of strip and of atmospheric gas in furnace. The adhesion failure of the hot-dip galvani-zed coating is classified as three mechanisms : carbon deposition, oxide film formation and alloy layer formation. The adhesion failure due to oxide film formation decreased markedly by increasing the gases temperature of direct fired furnace(DFF) in order to improve the reducing ability of steel strip. Optimum conditions of operating and manufacturing facilities for improving the coating adherence are suggested by analyzing the interface between steel substrate and coating layer.

• Tribology and Lubricants
• /
• v.8 no.2
• /
• pp.14-19
• /
• 1992

rate of growth of "protective" films of oxides and compounds derived from the lubricant. The protection afforded by the films is strongly dependent on lubricant and steel composition, initial composite surface roughness and the load/speed sequence or history in the early stages of sliding. The protective films, formed by chemical and mechanical action between lubricant and mating surfaces, delayed the surface roughening and offered higher load capacity. Given the great number of variables involved it is not possible to follow more than a few of the chemical changes on surfaces at the end of experiments. Ellipsometry was therefore used to monitor the formation and loss of dual protective films in real time, and also to find the effect of protective films on scuffing and break-in depending on lubricant conditions.

• Journal of Magnetics
• /
• v.4 no.2
• /
• pp.55-59
• /
• 1999

In an attempt to find an effective production way of the$ Sm_2Fe_{17}N_{x-}type material, the Sm_2Fe_{17-}$type alloy with chemical composition of Sm 22.7 wt.%, Fe72.3 wt.% Nb 5.0wt.% was subjected to a HD (hydrogen decrepitation) treatment prior to a nitrogenation, and its effect on the formation of the nitride material was investigated. The nitrogenation behaviours of the alloy were investigated using a TPA(thermopiezic analysis), TMA, and DTA under nitrogen gas, and XRD. It has been found that the previous HD treatment significantly facilitated the formation of $Sm_2Fe_{17}N_{x-}$type nitride, and this was accounted for by the clean surface and the finer particle size of the powder caused by the HD treatment. It has also been found that the hydrogen atoms existing in the initial HD-treated alloy were removed almost completely during the nitrogenation. The heat output associated with the nitrogenation of the previously HD-treated alloy was found to be significantly smaller than that of the as-cast alloy.

• Korean Journal of Food Science and Technology
• /
• v.16 no.3
• /
• pp.363-367
• /
• 1984

Conditions for efficient formation and regeneration of protoplasts of Streptococcus lactis ATCC 11454 were investigated. Addition of 20mM DL-threonine into growth medium, growth phase and lysozyme concentration had significant effects on protoplast formation. Approximately, 20% regeneration efficiency was obtained by optimizing the medium composition and modifying the plating procedure.

• Horticultural Science & Technology
• /
• v.16 no.1
• /
• pp.42-44
• /
• 1998

The effect of medium composition on PLB formation and multiplication and shoot regeneration was studied to establish the micropropagation system of the tropical orchid Phalaenopsis. The highest frequence of PLB formation resulted from the VW medium with 1.2 times ion concentration, 1% sucrose, 1.5g/L PVP or 2.5g/L active charcoal, apple and potato extract and 4g/L gellan gum. The highest ratio of PLB multiplication was obtained from the VW medium with 2% sucrose, apple and potato extract and cotton plate. The shoot regeneration was the most effective with the hyponex medium with 3% apple, 3% potato and 4% banana extract.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.5
• /
• pp.218-221
• /
• 2011

We modified the optical properties of the $CuInS_2$ nanocrystal (NC) by alloying. Nanocrystals (NCs) with alloyed cores were synthesized by refluxing the as-synthesized $CuInS_2$ NCs with a mixture of cadmium acetate, zinc acetate and palmitic acid. The shift in emission wavelength of the NCs after shell layer formation was minimized by alloying. The photoluminescence (PL) spectra showed significant reduction of emission intensity. A detailed study on the emission process of NCs implies that the formation of shell layers with small lattice mismatch minimized the mismatch strain generated from the shell layers in contrast to core alloyed NCs. In particular, time-resolved PL spectra of the NCs showed a significant increase in the lifetime of excited carriers by modifying the band alignment of the NCs by modifying the shell composition.