• 미생물학회지
• /
• 제20권4호
• /
• pp.201-209
• /
• 1982

An enzyme, named GTP cyclohydorlase, that catalizes the hydrolytic removal of carbon No.S of GTP has been partially purified from extracts of Pseudomonas putida (IAM 1506). The enzyme exists in two molecuar weight forms : a high molecular weight form (150,000) and a low molecular weight from (40,000). The high molecular weight form has been purified 25-fold. Some of the properties of the enzyme are as follows : It functions optimally at pH8.0, and at $52^{\circ}C$. The Km value for GTP is $20{\mu}M$. Divalent cations $(Cd^{2+}\;and\;Hg^{2+})$ 2+/) at a concentration of 5mM inhibit completely the enzyme activity. No metal ion including $Mg^{2+}$ is needed for the catalysis. The enzyme is heat labile ; its half at $57^{\circ}C$ is 1.5 min. Of a number of nucleotides tested, only GDP was used to any extent as substrbte in place of GTP. One of the products of the enzyme is determined to be a dihydro-neopterin compound.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.249-254
• /
• 1998

Recently, high quality architectural concrete, i.e., appearance of natural stone and a marbling effect, is needed, to achieve high quality glassy reflective surface for outer wall of the building. In this study to achieve above characteristics of the "glossing exposure concrete" we developed a form practice and the best mix proportion and derived the optimistic removal time of form to bring out the durable glassy reflective surface and durable concrete. Hereby with the "glossing exposure concrete" obtained we applicate for first time, to Electronics and Telecommunications Research Institute situated on Taedok Science Town and it will be the beginning of the construction of "glossing exposure concrete" in this country.oncrete" in this country.ntry.

• 한국기계가공학회지
• /
• 제12권2호
• /
• pp.114-120
• /
• 2013

An EP(Electrolytic Polishing)-MAP(Magnetic Abrasive Polishing) hybrid process was applied to remove burr on the micro pattern. Micro pattern fabrication processes are combined with micro milling and EP-MAP hybrid process for deburring. Depending on the micro milling conditions which are applied, micro burrs are formed around the side and top of the pattern. The EP-MAP deburring is used to remove these burrs effectively. To optimize removal rate and form error in the EP-MAP hybrid process, a design of experiment was performed. The effect of deburring process and form error of micro pattern are evaluated via SEM images and the results of AFM.

• 대한조선학회논문집
• /
• 제29권3호
• /
• pp.15-20
• /
• 1992

이 논문에서는 화가의(Painter's) 알고리듬을 사용하여 3차원 자유형상곡면(Three dimensional free form surface)을 가시화하는 방법을 개발하였고, 특히 선체형상은 Open 균일 B-Spline 곡면으로 정의하였다. 컴퓨터그래픽스를 응용하여 와이어프레임, 숨은면제거, 묘영등의 가시화를 위한 프로그램을 완성하였다. 또한 선체곡면의 순정을 검토하기 위해 Gaussian 곡률값을 15등급으로 구분하여 등급별 색(color)처리 하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.559-564
• /
• 1995

Feature based design approach is widely studied for the application of mechanical part design and process planning. Mechanical parts are associated with volumetric form features in nature. Therfore, one of the important characteristics that reside in the form feature research until now is that features have been studied in connection with CAPP for material removal. We studied the application of feature based design for ship structure design. Ship structure has interesting nature that tis distinct from mechanical parts. Among these are multiple cell structure, non-volumetric part and production by welding or assembling. An idea of applying feature based design paradigm for design, process planning, cost analysis and engineering calculation was shown. Non-manifold geometric modeler ACIS was adopted to fully benefit from the non-manifold nature of ship structure.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.401-402
• /
• 2023

The shear connection of the vertical construction joint of a slurry wall by the concrete shear key has excellent structural performance and is economical and eco-friendly. However, technology for forming concrete shear keys in the underground is still underdeveloped. This paper proposes the development of the construction technology required to form a concrete shear key at the vertical construction joint of the slurry wall.

• 한국대기환경학회지
• /
• 제34권4호
• /
• pp.554-566
• /
• 2018

The rice husk contains nutrients which can be easily utilized by microorganisms, and also has a water retaining ability, which played a crucial part in enabling it to become a biofilter media. In this study, we evaluated the applicability of rice husk pellet bio-scrubber as a microbiological carrier. The pelletization experiment of rice husk as a biological media was performed using PVA and EVA binder. Also, the feasibility tests of rice husk as a biological media for odor removal were carried out in order to know whether rice-husk contains useful components as a media for microbiological growth or not. Lastly, a combined test for odor gas absorption and biological oxidation was conducted using a lab scale bio-filter set-up packed with rice-husk pellets as wet-scrubber. The major components of the rice husk were carbon, hydrogen, nitrogen, and oxygen, while carbon acted as the main ingredient which comprised up to 23.00%. The C : N : P ratio was calculated as 45 : 1 : 2. Oxygen uptake rate, yield and decay rate of the rice husk eluent was calculated to be $0.0049mgO_2/L/sec$, 0.24 mgSS/mgCOD and 0.004 respectively. The most stable form of rice husk pellets was produced when the weight of the rice husk, EVAc, PVAc, and distilled water was 10 : 2 : 0.2 : 10. The prepared rice husk pellets had an apparent density of 368 g/L and a porosity of 59.00% upon filling. Dry rice husks showed high adsorption capacity for ammonia gas but low adsorption capacity for hydrogen sulfide. The bio-filter odor removal column filled with rice husk pellets showed more than 99.50% removal efficiency for NH3 and H2S gas. Through the analysis of circulation water, the prime removal mechanism is assumed to be the dissolution by water, microbial nitrification, and sulfation. Finally, it was confirmed that the microorganisms could survive well on the rice husk pellets, which provided them a stable supply of nutrients for their activity in this long-term experiment. This adequate supply of nutrients from the rice husk enabled high removal efficiency by the microorganisms.

• 대한환경공학회지
• /
• 제28권3호
• /
• pp.345-350
• /
• 2006

본 연구에서는 생물학적 처리방법으로 염색폐수의 난분해성 유기물질을 효과적으로 처리하기 위한 방안으로 활성슬러지를 Polyethylene glycol(PEG)에 포괄고정화한 담체를 유동상 반응기를 이용하여 난분해성 유기물질의 처리효율을 평가하고 적정 운전인자를 검토하였다. 담체는 내경 4 mm${\times}$높이 4 mm의 원통형으로 미세공극을 가진 PEG재질의 담체를 제조하기 위해 PEG-prepolymer와 미생물을 젤 상태에서 혼합하여 고형화 시켰으며, 이때 담체에 사용된 미생물은 염색폐수에 순응시키지 않은 상태에서 합성되었다. 연속 호기성 유동상 반응기의 유입수는 $SCOD_{Cr}$ 약 330 mg/L, $SBOD_5$ 20 mg/L 이하의 생물학적 처리수를 사용하였고, 체류시간의 변화에 따른 각 반응기의 난분해성 유기물질 제거효율을 비교하였다 생물학적 처리수를 유입수로 하여 동일한 HRT로 운전한 결과 모든 조건에서 45% 이상의 유기물 제거효율을 보였으며, HRT 12 hr이 유기물 제거효율 등을 고려할 때 안정된 효율을 얻을 수 있는 적정 체류시간으로 판단되었다. 특히 기질환경의 변화에 따른 유기물 제거효율의 변화를 확인하기 위하여 생물학적 처리전의 처리장 유입폐수를 처리한 결과 $SCOD_{Cr}$ 70% 이상, $SBOD_5$ 97% 이상의 높은 처리효과를 나타내었다. 포괄고정화 담체를 이용한 염색폐수처리에서 유동상 반응기는 기존 활성슬러지 공정을 대신하거나 혼용하여 적용하는 것이 가능할 것으로 판단되어진다.

• 한국철도학회논문집
• /
• 제17권5호
• /
• pp.365-372
• /
• 2014

콘크리트 공사에서 공기단축과 시공비 절감을 위하여 가장 핵심적인 기술 중 하나는 온도 제어 양생기술이다. 최근에 마이크로웨이브를 이용한 발열 촉진 양생방법이 개발되었다. 본 연구에서는 개발된 기술을 적용한 콘크리트의 조기 강도발현특성을 실험적으로 고찰하였다. 총 6차에 걸친 대형 Mock-up 실험을 수행하였으며 실험결과를 성숙도이론에 근거하여 해석하였다. 개발된 방법으로 양생된 콘크리트의 압축강도 발현과 성숙도는 로그함수의 관계를 나타내었으며, 일반적인 고온 증기 양생된 콘크리트에 적용되는 등가재령이론으로 강도예측이 가능한 것으로 확인되었다. 개발된 마이크로웨이브 발열거푸집에 의해 동절기에도 하루면 거푸집 탈형을 위한 소요강도를 확보할 수 있는 것으로 나타났다.

• 한국미생물·생명공학회지
• /
• 제25권6호
• /
• pp.552-559
• /
• 1997

Fe (III) impurities in clay could be microbially removed by inhabitant dissimilatory Fe (III) reducing microorganisms. Insoluble Fe (III) in clay particles was leached out as soluble reductive form, Fe (II). The microorganisms removed from 10 to 45% of the initial Fe (III) when each sugar was supplemented to be in ranges of 1 - 5 % (w/w; sugar/clay). The microorganisms reduced 2.1 - 12.8 mol of Fe (III) per 100 mol of carbon in sugars metabolized when sugars such as glucose, maltose, and sucrose were used as sole carbon source. Bacillus sp. IRB-W and Pseudomonas sp. IRB-Y were isolated from the enrichment culture of the clay. The isolates were considered to participate in metabolizing organic compounds to fermentative intermediates with relatively little Fe (III) reduction at initial Fe (III) reduction process. By the microbial treatment, the whiteness of the clay was increased form 63.20 to 79.64, whereas the redness was obviously decreased form 13.47 to 3.55. This treatment did not cause any unfavorable modifications in mineralogical compositions of the clay.