• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.355-361
• /
• 2004

Ceramic femoral heads in the total hip replacement have been developed to reduce the polyethylene liner wear, Alumina and zirconia (3Y-TZP) having the excellent tribological properties are coupled against acetabular cups of polyethylene and are used in clinical application worldwide. However, alumina has a risk of catastrophic failure, and zirconia has the low temperature degradation in spite of enhanced fracture toughness. Recently, novel zirconia/alumina composite is very attractive due to the low temperature degradation (LTD)-free character and high fracture toughness. In the present study, we focus on the wear of ceramic on ceramic, which are able to be used as femoral heads and acetabular cups. Therefore, LTD-free zirconia/alumina composites with three compositions are made in a form of disk and cylinder, and the wear of the composites is performed on pin-on-disk type wear tester. The wear is conducted with or without lubricant. All the composites fabricated with the different composition show the good wear resistance.

• 한국실내디자인학회논문집
• /
• 제17권1호
• /
• pp.146-154
• /
• 2008

The study aims to find out the changing aspects of contemporary Korean libraries so called public in terms of their spatial characteristics. In so doing, it analysed 16 recently built libraries by using the spatial depth defined in the Space Syntax theory. As the result, it could be said that the libraries were planned and designed well reflecting the world wide trend as a public institution such as an open plan, easy access, new functional spaces, and so on. It could be also said, however, that there was no difference between the previous libraries and the recent ones when the actual usage is considered. It means that the architectural attempts have been made to plan an 'open, public library', especially in terms of the spatial configuration, whereas the way of management has not been changed at all for some reasons such as the lack of staffs, security and so on. Therefore, it can be seen that the depth, one of the most important factors in the recognition of the spatial configuration, is more deepened as a form of the liner structure in the spatial configuration.

• Tribology and Lubricants
• /
• 제31권3호
• /
• pp.86-94
• /
• 2015

We perform lacquer formation experiments with various combinations of marine fuel oils and lubricant oils. We also investigate the influences of base number (BN) in lubricant oil and sulfur content in fuel oil. A dissolution test with 10% dilute sulfuric acid and pull-off force test are accomplished to distinguish whether the residual layers are lacquering or not. The lacquering layers are dissolved by dilute sulfuric acid and have a strong pull-off force. Moreover, the calcium content detected in the residual layers is compared by energy dispersive x-ray spectroscopy (EDS). More calcium is detected in the lacquer layers than in other residual layers. Distillate fuels containing low sulfur levels are more prone to lacquering when mixed with lubricant oil with a high BN. On the other hand, residual fuels with a high sulfur content do not form lacquer. We investigate the effect of mixture volume ratio. The mixture with higher fuel oil content is more prone to generate lacquer. These experiments indicate that a lubricant with an appropriate BN should be used to prevent lacquer forming on the surfaces such as cylinder liners depending on the sulfur content of fuel oil.

• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1731-1740
• /
• 1995

Experimental investigations have been made to study the double-diffusive nature of convection of an initially stratified salt-water solution due to heating from below in a rotating cylindrical cavity. The objective is to examine the flow phenomena and the heat transfer characteristics according to the changes in temperature gradient, concentration gradient and rotating velocity of cavity. Thermal and solutal boundary conditions at side wall are adiabatic and impermeable, respectively. The top and bottom plate are maintained each at constant temperature and concentration. The cavity is put into a state of solid body rotation. Like the stationary case, the types of initially-formed flow pattern are classified into three regimes depending on the effective Rayleigh number and Taylor number; stagnant flow regime, single mixed-layer flow regime and successively formed multi-mixed layer flow regime. At the same effective Rayleigh number, the number of initially-formed mixed layer and its growth rate decrease as the effect of rotation increases. The temperature and concentration profiles are both uniform in each layer due to convective mixing in the layered-flow regime, but look both liner in stagnant flow regime and single mixed-layer flow regime. At the interface between adjacent layers, the temperature changes smoothly but the concentration changes rapidly.

• 복식
• /
• 제52권7호
• /
• pp.13-25
• /
• 2002

The purpose of this study is to develope a creative expression technique in fashion illustration through analyzing applied techniques of the elements related to creative expressions in fashion illustrations. They were investigated in view of line, form, texture, color, space and the results were summarized as follows. In the creative expression using line in the fashion illustration. emotional effects of line created by specific character of mediums and duplicated lines have been applied to visualize movements of the objects. In shape, the transformed figure by destructing. covering or eliminating a part of the figure or the dress has been adapted. In texture. the invented texture reconstructed from actual texture has been applied, collage technique. computer graphic being used to give various images of texture. The creative expressions using color have been achieved by the shading. and spreading effects and the symbolic meaning of color for creating a spatiality in a picture plane and to give emotional effects and visual concentricity. In space, the color perspective together with detailed description. the combination of various points of view and liner perspective have been used to create depth and illusional space in pictorial plane.

• 한국동물위생학회지
• /
• 제41권2호
• /
• pp.125-131
• /
• 2018

This study investigated the effects of the alkaline detergent and acid rinse used for cleaning milking machines on the rubber composition of the newly-developed teat cup liners. The samples prepared for use in the clean-in-place process were analyzed by ultraviolet spectrophotometer, ion chromatography and liquid chromatography. In the absorption spectrum of the first sample solution, the form of absorbance or absorption peak was largely different, compared to the absorption spectrum of alkaline detergent alone, but in the absorption spectra of the second and third sample solutions, the absorbance decreased, which was similar to the absorption spectrum in the pure acid detergent. In the ion chromatogram, two main peaks only, which might be shown by the pure alkaline detergent alone, were measured. In the liquid chromatograms, however, new peaks were observed in addition to the two main peaks caused by the pure alkaline detergent alone, which suggested that various molecular materials were created or eluted from the liner by the reaction with the alkaline detergent, but when washed with the acid detergent, any ion species were not produced. Therefore, we propose that an acid rinse should be applied, after cleaning the milking machine with the alkaline detergent.

• 한국지반환경공학회 논문집
• /
• 제5권2호
• /
• pp.23-31
• /
• 2004

본 연구에서는 침출수 차수재에 Zero Valent Iron (ZVI)를 포함 시켰을 경우, ZVI 함량과 pH에 따른 TCE, 6가 크롬, 질산성질소의 제거능의 변화를 살피고, 반응이 끝난 후 철과 벤토나이트 표면의 철 산화물을 라만 분광기를 통해서 알아보고자 하였다. ZVI의 함량을 중량비로 벤토나이트의 0, 3, 6, 10, 13, 16, 20, 30, 100 w/w% 로 맞춘 9가지의 샘플을 pH7의 완충 용액을 사용했을 경우와 완충 용액을 사용하지 않을 경우 두 가지로 나누어서 실험하였다. Kinetic test 결과, pH7의 완충 용액을 사용하였을 때가 사용하였지 않았을 때보다 TCE의 경우 330시간에서 300시간으로, 6가 크롬의 경우 20시간에서 4시간으로, 질산성질소는 140시간에서 5시간으로 제거 속도가 빨라졌다. 모든 오염물질의 경우 ZVI 함량이 증가할수록 제거 효율이 높아졌으며, pH 7의 완충 용액을 사용하였을 경우 제거 효율도 더 높아지는 것을 볼 수 있었다. 반응 후 철과 벤토나이트의 표면을 라만 분광기를 이용하여 분석한 결과 여러 가지 철산화물이 확인되었다. 이러한 철산화물은 좋은 흡착제의 역할을 할 수 있으며, 이 중 magnetite는 장기간 동안 오염물질의 제거 성능을 유지시켜 줄 수 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제15권4호
• /
• pp.29-45
• /
• 1991

Lip type stern tube sealing systems have used in almost all the middle or large ships which are being constructed in these days. It seems that the pressure fluctuation of the seal ring interspace, the cross-section profile and the materials quality of the seal rings have great effects on the sealing fuction of this sealing system. In this paper, the mechanical movement of lip seal ring which plays the most important role in stern tube sealing system and the possibility of leakage caused by pressure fluctuation are studied by theory and experiment. Using the finite element method for the axi-symetric object which receives the torsional load, the displacement and stress analysis of the seal rings, and also the possibility of crack occurance is checked by theoretical analysis. If the force which seal ring lip periphery receives is too small, there will be the possibility of leakage caused by the pressure fluctuation of the seal ring interspace, and if this force is too large, the frictional force between the seal ring and the liner will become problematical. The possibility of leakage caused by hardening of seal ring materials and creep phenomena of tested seal rings are also examined. The trial seal rings were designed and manufactured using the program of displacement and stress analysis developed in this study and the experimental apparatus to test the trial seal rings was also designed and manufactured. This trial seal rings were fitted in the experimental apparatus which was made in the same form as an actual stern tube. The one side of this apparatus was filled with sea water and the other side of it was filled with the lubricating oil. The leakage of oil and sea water was checked and the temperature was measured, rotating the propeller shaft at the constant velocity by D.C. motor. It was proved that the trial seal rings made in Viton rubber functioned excellenty but the trial seal rings made in N.B.R. rubber had problem in its durability.

• 패션비즈니스
• /
• 제20권6호
• /
• pp.94-110
• /
• 2016

A necessity for infants, diapers are not only used over long durations, but are also in direct contact to the infants' skin, making the choice of diaper to be of utmost importance. Current interest in cloth diapers is rapidly increasing because of issues concerning the baby's health, green environment, and economy. However, previous researches on cloth diapers are limited to simply investigating the form and material of commercial cloth diapers. There are few in-depth researches for the optimal cloth diaper development. This is therefore a fundamental research for the development of optimized cloth diapers, and analyzes the difference in absorption depending on the placement of seam line (liner, darts, and I pattern), the locations of liquid spraying (1 cm and 8 cm ahead of the center), and the amount of liquid capacity (10 and 20 ml). Currently, the development of diaper patterns considers the crotch shape of the infants and the skin length deformation. As a result, in the case of the I-pattern, the horizontal seam line prevents water from spreading to the front and back, thus reducing the absorbed area. This result was more clearly visible when water was sprayed at the center. The effect of the seam line became more obvious when there was more water (20 ml); also, when water was sprayed at the center, more leakage was observed. Using the results of this research, implementation of horizontal seam is expected to prevent the upward spread of urine.

• 한국토양환경학회지
• /
• 제1권2호
• /
• pp.51-60
• /
• 1996

본 연구에서는 산업폐기물로 버려지는 hematite와 ferrite를 이용하여 Mn-EDTA와 불소의 제거에 대한 실험을 행하였다. 제거율을 비교, 평가하기 위하여 무기오염물에 대하여 우수한 흡착능을 가지는 것으로 알려진 Na-bentonite를 실험에 포함하였다. Batch형태의 실험 결과, 망간에 대하여 여러 초기농도에서 ferrite-A는 48∼65 %, ferrite-B는 46∼57 %, hematite 의 경우 17∼26%o의 제거율을 갖는 것으로 나타났으며, Na-bentonite의 경우, 10∼23%의 제거율을 나타냈다. 불소의 경우에는 hematite가 53∼63%의 제거율을, ferrite-A가 54∼63%, ferrite-B는 20∼38%를 보였다. 연구 결과 Hematite와 Ferrite가 가지고 있는 특히 complex ion을 형성하는 무기 오염 물질 제거능이 Na-bentonite 보다 우수한 것으로 나타났다. 결론적으로 이러한 산화 광물과 Na-Bentonite 의 혼합을 통하여 차수재로서의 Na-bentonite의 역할을 증진시킬 수 있을 것이다.