• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.52 no.2
• /
• pp.79-87
• /
• 2016

Mobile fish-cage was developed assuming a cage net with an enclosed area, which and estimated the hydrodynamic characteristics of the cage through the model experiment. Flux-shielding plates, installed in the bow were compared with the resistance test carried out by making a hole, bilge keel and stud, and basic block flow rate consisting of the results to a flat surface plate. The experimental results confirmed the improved resistance performance effect of 3~6% in the bilge keel and the stud form. To assess the stability of the fish-cage, evaluation of the stability in accordance with the stability criteria for determining the floating docks had confirmed that it satisfied the static stability performance under operating conditions at sea.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.217-221
• /
• 2002

In this research a Matlab/Simulink/RTW - based on the realtime control system was developed for an induction motor vector control. On the Simulink window, the control system is designed In the form of block diagrams, program codes are produced automatically with the RTW(Real Time Workshop), then a DSP c compiler complies the program codes.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.514-514
• /
• 2000

In this article, the realization of a precision full-wave rectifier circuit for analog signal processing, which operates throughout in the current domain, is presented. The circuit makes use of a MOS class B/AB configuration, and provides a wide dynamic range and wide-band capability. The rectifier has a simple circuit configuration and is suitable for implementing in CMOS integrated circuit form as versatile building block. The characteristic of the circuit exhibits a low distortion en the output signal at low level input signal. PSPICE simulation results demonstrating the characteristic of the proposed circuit are included.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.6-6
• /
• 2011

Graphene, a monlayer of carbon atoms arrange to form a 2-dimensional honeycomb lattice, exhibits enormous fascinating properties, such as a linear energy dispersion relation, a wide-range optical absorption, high thermal conductivity, and mechanical flexibility [1]. Because the unique material properties of graphene allow it to be a promising building block for the next generation electronic and optoelectronic devices, sometimes graphene-based devices have refereed to be a strong candidate to overcome the intrinsic limitations of conventional semiconductor-based technology [2,3]. However, there are several fundamental or technological hurdles to be overcome in real applications of graphene in electronics and optoelectronics. In this tutorial we will present a short introduction to the basic materials properties and recent progress in applications of graphene and discuss future outlook of graphene-based electronic and optoelectronic devices.

• Journal of Pharmaceutical Investigation
• /
• v.26 no.3
• /
• pp.201-205
• /
• 1996

Poloxamer, block copolymers of ethylene oxide and propylene oxide was crosslinked by diisocyanates and triisocyanates to form water-swellable, physically strong, rubber-like elastic, high biocompatible polyurethanes. The isocyanate-hydroxyl stoichiometry was kept 1:1, but the crosslinking density was varied. The variations examined were the ratio of diisocyanate and triisocyanate. The delivery of two drugs of different water solubilities from hydrogel matrices was studied. It appeared that the drug nature greatly influenced its release kinetics possibly due to drug-polymer interactions. The release profiles, however, could be modified to a great extent by adjusting the polymer network structure Generally the high crosslinking density was required for prolonged drug delivery.

• Journal of Food Hygiene and Safety
• /
• v.8 no.4
• /
• pp.225-230
• /
• 1993

This study was conducted to examine the stages showing the antimutagenic effects on the microbial mutation by addition of the juice extracted from small water dropwort. It was not able to find out the signal showing the genic derepression or change of gene repair system by addition of the juice. And it was hardly possible to expect the conversion of 2-AF to inactive form by the juice. however the longer 2-AF and S-9 mix were contacted before addition of the juice, the stronger the microbial mutagenisity of 2-AF was, and after addition of the juice, the mutagenicity was decreased rapidly. It seems that some components in the juice act as inhibitor of a enzyme in S-9 mix, and block the conversion of 2-AF to the ultimate mutagen.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6C
• /
• pp.547-553
• /
• 2010

In this paper, novel approximated closed-form expressions of the SER(Symbol Error Rate) and BER(Bit Error Rate) are presented for the multi-input multi-output space-time block coding(MIMO-STBC) system employing two transmit and N receive antenna(s) in Rayleigh fading channels. Assuming a zero-forcing equalizer and a single-symbol maximum-likelihood (ML) decoder, the formulas are derived for the SER and BER, and then their approximated counterparts are also derived. In the derivation of the approximated expressions, acurve-fitting model is adopted that can eliminate the integral operators in the exact expressions.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.50 no.3
• /
• pp.136-142
• /
• 2001

In this research a Simulink/RTW-baed realtime control system was developed for an induction motor vector control. On the Simulink window, the control system is designed in the form of block diagrams, program codes are produced automatically with the RTW(Real Time Workshop), then an DSP c compiler compiles the program codes. With this automatic program producing method rapid prototyping is realized with the least time-consuming manual programming procedures. To show effectiveness of the proposed system designing scheme a DSP-based induction motor vector controller was constructed and implemented.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2011.09a
• /
• pp.90-94
• /
• 2011

Longitudinal shell member that arranged block unit on 3D-curved surface is performed manual working by designer considering spacing of division characteristic, location and twisting at geometrical 3-dimensional form. Shell expansion drawing that drawn by initial design and shell landing work performed by hull production design have overlap of design work in terms of arrangement of shell longitudinal member. In this study, eliminate design overlap on shell member arrangement that is one of ship longitudinal member. Develop shell member optimization and auto arrangement system.

• Journal of the Korean Home Economics Association
• /
• v.23 no.3
• /
• pp.1-8
• /
• 1985

This study is an ergonomic study on the function of sleeves related with the expansion and contraction of the upper Extremity skin surface by various movememts. RESULTS : 1. According to the plane figure, a. The change of form is like fig. 3. b. In the changing rates of the expansion and contraction of skin surface by various movements, that of arm hole girth shows an extremely big discrepancy and that of Elbow Girth shows a relative low one. c. According to the rate of the expansion and contraction of each block, the inside of the upper arm area expands most in all the blocks measured. 2. According to the rate of expansion and contraction of skin surface by somatometry, inside lehgth of arm in M\sub 2\ and outside length of the upper arm in M\sub 4\ expand significantly8and also elbow girth in M\sub 6\, M\sub 7\, M\sub 8\ expands significantly.