• Journal of Korean Society of Forest Science
• /
• v.104 no.2
• /
• pp.221-229
• /
• 2015

The purpose of study was to broaden our knowledge on the productivity and cost of thinning operations which has become increasingly practiced in Korea. The thinning operations were conducted in a 40-year old larch (Larix leptolepis) stand, including chainsaw felling and processing at the stump, followed by yarding tree-length logs using a Koller K301-4 tower yarder. The logs were further processed and sorted into 1.8 m and 3.6 m log piles at the landing. We used a standard time study method to evaluate key variables that affect the productivity of thinning operations. The total stump-to-pile operational cost was $41,707won/m^3$. The highest cost activity was the yarding phase which cost $20,083won/m^3$ (48.2% of the total cost), followed by the costs of processing treelength materials into marketable log lengths ($12,143won/m^3$; 29.1%), and then by the costs of sorting/piling the processed logs ($5,039won/m^3$; 12.1%). It was interesting to see that felling and processing trees at the stump had low costs at $1,315won/m^3$ (3.2%) and $3,127won/m^3$ (7.5%), respectively. We used the detailed time study data to develop regression equations which were to predict yarding productivity. Our analysis showed that harvesting system cost was highly sensitive to the number of logs, yarding distance and lateral distance per turn, respectively.

• Journal of the Korean Wood Science and Technology
• /
• v.13 no.3
• /
• pp.41-48
• /
• 1985

In near future about 500,000 hectares of Japanese larch and pitch pine need thinning to improve crop-tree spacing and reasonable species composition in Korea. Although thinned trees show very little high quality wood, in fact, all the sawed products are suitable for construction and farming materials. Studies on the utilization of thinned small-diameter trees have been implemented in order to increase lumber yield and display the skeleton of farm buildings. The results obtained in this study were summarized as follows: 1. According to Korean Conifers Log Grading System, log grade 3 was 87.4 percent in Japanese larch bolts and 95.8 percent in pitch pine bolts from thinned trees. The ability to identify defects was essential for grading logs. 2. Cutting diagrams of sawing were developed for 1-sided sawing, 2-sided sawing and 3-sided sawing by small end diameter class of bolt and cutting sizes also were found to use effectively lumber with wane. 3. Lumber recovery of Pitch pine was a little higher than that of Japanese larch. The maximum lumber yields of pitch pine by sawing patterns were 87.2 percent for 1-sided sawing, 80.8 percent for 2-sided sawing an 64.1 percent for 3-sided sawing, up yield compared with 58.1 percent for 4-sided sawing. The lumber yield of 1, 2 and 3-sided sawing significantly was higher value than that of 4-sided sawing. 4. Lumber was inspected and graded. Lumber quality of diameter class 12cm was a little better than that of diameter class 8cm, but 90 percent of lumber in diameter c1ass 16cm fell into grade 3. The lumber grade was classified by Korean standard grades of confiers lumber. 5. Lumber from 1, 2 and 3-sided sawing was used to build the skeleton of a farm house ($53m^2$) and greenhouse ($60m^2$) in order to display more efficient use of small diameter trees from thinning 6. Total volume of timber for building a farm house was $8.1m^3$ of imported timber. Timber of $7m^3$, 70 percent of total volume would be substituted imported timber for domestic timber.

• Journal of Korean Society of Forest Science
• /
• v.88 no.3
• /
• pp.309-319
• /
• 1999

This study was conducted to get forest scenic beauty management information toward forest working systems; characteristics in Larix forest stands. 35 different alternatives were simulated to visualize on basis of actual forest working methods. The options were illustrated as photos produced by computer software. Each alternatives were evaluated by 3 groups with total 593 respondents after reliability test. Visual preference evaluation was used 1 - 10 point rating scale. The ratings were scaled using SBE analysis program of RMRATE. To compare the relationship of visual preference and image scale, Spatial images of 13 thinning alternatives were measured by Semantic differential scale. In general, the respondents preferred refreshing and ordering forest stand after forest working to natural forest stand before forest working. Visual preference decreased with the increasing intensity of bare ground area and slash area in forest stand. And also, visual preference was high related to tree density, clear length of stem, and ground vegetation. Farm line of small clear cutting area was preferred straight line to curve line. Visual preferences were significant differences in certain socioeconomic variables of the respondents. Results indicate how to conduct forest working system for forest scenic beauty management.

• Journal of Korean Society of Forest Science
• /
• v.85 no.3
• /
• pp.396-408
• /
• 1996

The purposes of this study were to standardise the forest working system to design the intensity of working system in felling operation of the thinning forest in our country as well as to contrive the improvement of working method and the increase of productivity. For the purpose of investigating these, element working was classified by felling operation in softwood thinning forest, and a pulse rate were measured and analyzed. The results were as follow : 1. From the analysis of the pulse frequence measurment, the average pulse showed 108 pulse per minute for worker A in the total of pure working time, 130 pulse per minutes for worker B, 119 pulse per minute for worker C and 125 pulse per minute for worker D, respectively. 2. From the results of the pulse frequence analysis according to element working classification, the highest pulse frequence represented 115 pulse per minute for worker A in the circumference, 131 pulse per minute for worker B in the movement, 122 pulse per minute for worker C in the limbing operation and 128 pulse per minute for work D in hang-up. 3. If the original pulse frequence was 100% for workers, the working intensity showed as follow : worker A was 160%(original pulse frequence was 61=100%) for the total of the working intensity and 188% for the circumference among element working. Worker B was 220%(original pulse frequence was 57=100%) for the total of the working intensity and 229 for movement among element working. Worker C was 159%(original pulse frequence was 73=100%) for the total of the working intensity and 168% for limbing operation among the element working. Worker D was 156%(original pulse frequence was 70=100%) for the total of working intensity and 182% for hang-up among element working. 4. At the limit point of Labor performance rating, showing the total of working intensity, overtime pulse rate per minute was 30 for worker A, 207 for worker B, 14 for worker C and 67 for worker D. Worker B was highest in working intensity, and got physically a big load.

• Korean Journal of Environment and Ecology
• /
• v.29 no.4
• /
• pp.580-589
• /
• 2015

The artificially grown forests of larch, planted in accordance with the nationwide afforestation policy in the 1970s, are located inside national parks. This study intended to induce a forestation system by which the forests develop into an ecologically healthy and broadleaved ecosystem with broad species diversity. For this, the aspects of natural regeneration of broadleaves from 2010 to 2013 after thinning by density (30%, 50%, and 70%) in 2009 were surveyed using the larch forest in the Woljeong Temple region inside Odaesan National Park. There were no trees that were larger than 2 cm in in diameter at breast height among the trees recently introduced between 2012 and 2013. A significant number of herbs have been introduced to the subsurface alongside young arboreal trees species such as Bumalda bladdernut, Acer triflorum, Cornus controversa etc and shrubs. However, many woody species did not survive the competition with herbs and repeated withering and regeneration. The number of woody species generated within the 30% cutting area was 440 species in 2013 and this figure has been increasing twofold each year. The number of woody plants within the 50% cutting area also showed an upward tendency and most plants did not survive in the competition with herbs and Sasa borealis and withered in only 1 ~ 2 years after generation. Unlike other thinning areas, the 70% cutting area showed 608 broadleaved trees, reflecting a decrease from 748 trees in 2012. This appeared to be attributed to the luxuriance of S. borealis and the sharp increase of fatsia following the inflow of total sunlight to the forest floor. Herbs were hardly generated due to the influence of S. borealis. Regarding the density for thinning at 50% or upper height, the forest treatment division shall maintain a proper density in the course of inducing artificial forestation of larch into natural broadleaved forests considering the luxuriance of sasa borealis and herbs due to the inflow of total sunlight to the forest floor.

• Journal of Korean Society of Forest Science
• /
• v.100 no.4
• /
• pp.585-590
• /
• 2011

The purpose of this research is to suggest economic feasibility of cultivating Acer Mono by using profitability analysis to forest owners. To achieve this research objective, forest owner household survey with intensive cultivating has been conducted about a sap production on its age of tree. And input costs and sap production costs are calculated with silvicultural system from plant to regeneration cutting. Total income is the sum of its sap sales and thinning and regeneration cutting. The method of profitability analysis was used on the NPV(Net Present Value) and IRR(internal rate of return). Finally, when 3% discount rate is applied, NPV is about 59,436 thousand won and IRR value is 9.22% at this point. This result, therefore, proves that cultivating Acer Mono is economical feasibility to forest owners.

• Journal of Korean Society of Forest Science
• /
• v.97 no.6
• /
• pp.641-649
• /
• 2008

This study was conducted to evaluate the productivity and the operational costs of the Chuncheon Tower-yarder, a skyline yarding system used in Korea. Detailed time study data were collected from 4 thinning sites in Japanese larch (Larix leptolepis) stands; one site for uphill yarding and three sites for downhill yarding. This study derived regression models to estimate the average cycle time (sec.) for uphill and downhill yarding. The average yarding cost was $12,844won/m^3$ for uphill yarding, while downhill yarding cost was $13,221won/m^3$. The average yarding time was 239 sec/cycle for uphill yarding, while downhill average yarding time was 274 sec/cycle. We found that uphill yarding productivity was higher when the operation system was examined under the same work conditions (i.e. standardized comparison) except yarding directions for both uphill yarding and downhill yarding.

• Journal of Korean Society of Forest Science
• /
• v.97 no.3
• /
• pp.274-284
• /
• 2008

For forest valuation, various input data were generally required: for example, slope, timber stocks, logging costs, hauling costs, market values of timber, afforestation costs, thinning costs, and so on. To enhance the efficiency of forest valuation process, it would be helpful to guide how and where to acquire such data sets. Moreover, to make an appraisal of timber assets through the Forestry Household Economy Survey, it would be inevitable to use standardized input data by region or tree species. Therefore, this research intended to develop a methodology of standardizing each input data, and to present its available data sources. Also, a guidance was presented to explain how to control input data within the appraisal process. Then, the appraisal process were analyzed and summarized in four types of information such as system flowchart, process flowcharts, detail flowcharts, and skimmer data, which are essential elements in developing an appraisal software, named EnVAST (Engine of Valuation System for Timber Assets). The software was designed to generate 'the standard forest valuation table' by species and province as the final output that is applicable for the forest valuation through the Forestry Household Economy Survey in Korea.

• Journal of Korean Society of Forest Science
• /
• v.103 no.3
• /
• pp.439-445
• /
• 2014

In this study, we developed a dynamic stand yield model to estimate the baseline carbon stock, which is essentially required for a forest carbon offset project based on forest management. For developing the yield model, the data was acquired from the databases of the $5^{th}$ National Forest Inventory. The model was validated by comparing its estimations with field measurements that were conducted from 4 study sites (14 plots with thinning treatments) located in Hong-chun, Hoeng-sung, Yang-yang Daechi and Yang-yang Jungja. The difference between the estimations and the field measurements was less than 5%. Using the dynamic stand yield model, we estimated the changes in stand yield volume and carbon stocks for each species according to the baseline scenarios. As the results, we found that baseline carbon stock was the highest at Quercus acutissima stand (83.01tC/ha), while the lowest at Pinus rigida stand (32.17tC/ha) and Pinus densiflora stand of central region (39.09tC/ha). Hence, a project provider could get more carbon emission credits from an improved forest management project when considering the project with Pinus rigida stand or Pinus densiflora stand (central region). The baseline carbon stock and the dynamic stand yield model developed from this study would be useful for designing carbon offset projects based on improved forest management.

• Journal of Korean Society of Forest Science
• /
• v.90 no.3
• /
• pp.388-397
• /
• 2001

In forestry, where improvement of labor environment is quite impossible, improved posture would result in direct effects by preventing waste of physical strength, prevention of accidental injury caused by fatigue accumulated on certain body parts, and prevention of human error by inattentiveness due to weakened body. Therefore, this research carried on analysis of working posture in manual forest work(thinning using chain-saw, salvage cutting using chain-saw, clearing using hand saw, clearance of twiner using sickle, pruning using saw with a long handle, and tending of young growth using sickle) using OWAS analysis system. According to the OWAS method, percentage of OWAS action categories III and IV in the tasks using chain-saw and sickle was higher than another tasks. For the compared middle skillful worker group and low skillful worker group at felling work using chain-saw, percentage of OWAS action categories IV in middle skillful worker group was 5.1%, and low skillful worker group was 14.1%.