• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.1014-1021
• /
• 1997

Studies were carried out on the preparation of several kinds of pulps from Sponge gourd fiber by KP, ASP, SP PAP, AP and addition of AQ pulping process. These unbeaten and beaten pulping fibers were observed their characteristics and fiber structure by SEM, FQA, Image analyzer and Micro projector. The results were summarized as follows; 1) The cooking condition which is the possible defibrilation of Shives are KP base($160^{\circ}C$, 2hr.), ASP base($155^{\circ}C$, 4hr.), PAP base($160^{\circ}C$, 1hr.). From the results, the kappa no. had the range of 12, 25, 10 each other. 2) The pulp yields of sponge gourd fiber obtained the range of KP 50~55%, ASP&60~70% and PAP 45~50%. SP base have the highest and contnets of KP&PAP base are much the same as woods. 3) Increasing amount of NaOH on Pulping was accelerated the defibrilation of Shives and was changed a morphology of pulping fiber quality such as fiber length, curl and kink index. 4) Addition of AQ on pulping process of sponge gourd fiber had a affect to raise the rate of delignification while protecting cellullosic components against degradation, especially defibrilation was very excellent, beated pulp much more easily and increased the fibrilation. 5) ASP system have higher bulk density, fiber bonding and protecting cellullosic components against degradation than KP or PAP. 6) The color reactions of the "C" stain solution showed blue or blue-gray with clean and transparency thin cell wall.

• Korean Journal of Environmental Biology
• /
• v.17 no.2
• /
• pp.191-198
• /
• 1999

Enzyme-aided bleaching of softwood and hardwood kraft pulps by a xylanase preparation from an alkalophilic fungus Cephalospotium sp. RYM-202 was studied. Maximal solubilization of Pulp xylan was obtained at 5$0^{\circ}C$ in both kraft pulps. The optimum pH of the enzyme for the hydrolysis of pulp xylan was 8.0 and more than 90% of the maximal activity was detected at 9.0. The positive effects of xylanase pretreatment on bleachability of softwood and hardwood kraft pulps were observed. The kappa number of softwood and hardwood kraft pulps was decreased by 3.7 and 2.0 units, respectively. The pulp fibre integrity was not significantly affected by xylanase pretreatment when the physical properties of handsheets made from xylanase-treated pulps were compared with those of handsheets from untreated pulps. These results indicate that the alkaline xylanase of Cephalospotium sp. RYM-202 is well suitable for application in enzymatic prebleaching of softwood and hardwood kraft pulps under the alkaline conditions.

• The Korean Journal of Mycology
• /
• v.28 no.2
• /
• pp.112-117
• /
• 2000

A similarity coefficient were analyzed by RFLP of fourteen species of entomopathogenic fungi, isolated from inhabiting pupa and adult insect at forest. Each rDNA ITS I and ITS II with primers of ITS 1 and ITS 4 was amplified by PCR. The amplified products were conserved to 500 bp were not demarcated between genus and species. Four Paeciliomyces tenuipes, two Beauveria bassiana and six Cordyceps militaris were treated by seven restriction enzymes and confirmed in species except JB3 by electrophoresis band. However, the band of C. scarabaeicola showed the identity with B. bassiana. The result of this experiment indicated that the teleomorph of C. scarabaeicola was the same as that of B. bassiana. CfoI and HpaII of seven restricted enzymes were easily discriminating in the genus between Paecilomyees and Cordyceps. Especially, CfoI was more effective to classify the genera of Paecilomyees, Cordyceps and Beauveria than other restriction enzymes. The band patterns of RFLP of P. tenuipes, C. militaris, C. scarabaeicola and B. bassiana were also analyzed by UPGMA program of NTSYS-pc and showed 100% significance. Thus, the similarity coefficient tended to be lower between genera by RFLP analysis, but was higher between species.

• Microbiology and Biotechnology Letters
• /
• v.40 no.1
• /
• pp.39-42
• /
• 2012

A new method for the high throughput screening of antagonistic substances against rice pathogens using rice leaf explants was developed. This method can be used to confirm the activities of any compound or mixture suppressing rice bacterial blight (BB) before field tests. Xanthomonas oryzae pv. oryzae (Xoo) culture medium was distributed in 96 well plates with equally sized explants and the active compounds were added to the wells. The strength suppressing BB was converted into an area percent of the lesion on the rice explants. The explants under BB suppressing activity remained uninfected maintaining their actual green color, while infected explants exhibited pale yellow-colored lesions. Based on the results, this method seems to be faster and easier, dose-dependent, and can be performed all-at-once with a small amount of unspecified compounds. This method also has the potential to be applied to inspection activities for the suppression of other waterborne crop diseases.

• Research in Plant Disease
• /
• v.14 no.1
• /
• pp.71-75
• /
• 2008

An isolate of Peanut stunt virus (PSV), named as Tr-PSV, was isolated from white clover (Trifolium repens L) showing mosaic symptom. Tr-PSV systemically infected all plants tested in the Nicotiana spp. and induced local lesions on inoculated leaves of Chenopodium amaranticolor. However, Tr-PSV induced typical mosaic symptoms as ER-PSV on Vigna unguiculata 5 to 6 days after inoculation, while Fny-CMV used as a control virus of Cucumovirus produced local lesions on inoculated leaves. In dsRNA analysis, Tr-PSV consisted of four dsRNAs, but satellite RNA was not detected. The cDNA of coat protein gene of Tr-PSV was amplified by RT-PCR using a Cucumovirus-specific single pair primers that designed to amplify a DNA fragment of approximately 950 bp. By restriction mapping analysis using RFLP of the RT-PCR products and by serological properties of gel diffusion test, Tr-PSV belongs to a typical member of PSV subgroup I. This is the first report on the occurrence of PSV in white clover in Korea.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.3
• /
• pp.70-84
• /
• 2008

A series of the studies on the applied physical properties of domestic species have been conducted last three years. Pinus densiflora was one of the three species examined for the first year. Because the same apparatus and experimental procedures were used for all species, their results can be easily comparable. The experiments for sorption property were conducted with 20- and 80-mesh wood powder and resulted in their EMC's and sorption isotherms at various heating conditions. The thermal conductivity and diffusivity, and electric resistance and volumetric electric resistivity were measured with a thermal-wire device and a high electric resistance meter. The differences of the thermal and electric properties between quarter- and flat-sawn specimens were observed, which was partially attributed to their anatomical differences. An acoustic measurement system was used to evaluate dynamic MOE and internal friction. This paper provides the useful fundamental data for designing a wood structure, correcting a portable resistance-type moisture meter, and nondestructive testing wood.

• Korean Journal of Remote Sensing
• /
• v.35 no.2
• /
• pp.337-342
• /
• 2019

This letter describes the development of WRI (Wildfire Risk Index) using GDAPS (Global Data Assimilation and Prediction System) and satellite data, and its application to the Goseong-Sokcho and Gangneung-Donghae wildfires in April 4, 2019. We made sure that the proposed WRI represented the change of wildfire risk of around March 19 and April 4 very well. Our approach can be a viable option for wildfire risk monitoring, and future works will be necessary for the utilization of GK-2A products and the coupling with the wildfire prediction model of the Korea Forest Service.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_1
• /
• pp.1301-1314
• /
• 2022

Normalized Difference Vegetation Index (NDVI) is utilized as an indicator to represent the vegetation condition on the land surface in various applications such as land cover, crop yield, agricultural drought, soil moisture, and forest disaster. However, satellite optical sensors for visible and infrared rays cannot see through the clouds, so the NDVI of the cloud pixel is not a valid value for the land surface. This study proposed a real-time correction of the underestimation noise for GEO-KOMPSAT-2A (GK2A) daily NDVI and made sure its feasibility through the quantitative comparisons with Moderate Resolution Imaging Spectroradiometer (MODIS) NDVI and the qualitative interpretation of time-series changes. The underestimation noise was effectively corrected by the procedures such as the time-series correction considering vegetation phenology, the outlier removal using long-term climatology, and the gap filling using rigorous statistical methods. The correlation with MODIS NDVI was higher, and the difference was lower, showing a 32.7% improvement compared to the original NDVI product. The proposed method has an extensibility for use in other satellite products with some modification.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.2
• /
• pp.128-133
• /
• 2002

This study was conducted to investigate the influence of storage time on the sapstain development of Japanese red pine and Korean pine logs during storage in log yard, and their stain characteristics. Japanese red pine and Korean pine trees were harvested and cut into logs in mid January of 2001. These logs were transported to the two local sawmills where they were closely stacked in remote parts of log yard. The logs were then sampled destructively by cutting seven to nine 3-cm long discs along the length of each log at intervals of 3, 4, 5, 6, and 8 month after felling. The stain coverage and maximal radial penetration of stain were measured from the discs of the sampled logs after the isolation of causal staining fungi. The sapstain was primarily infested by the attack of bark beetles and the species of bark beetle was identified as Tomicus piniperda. The main fungal species isolated from stained wood was Ophiostoma species. Based on the present study, the logs could be stored in log yard until May without stain; but stain development was rapid after May and the severity of stain increased proportionally with storage time. Korean pine was more susceptible to fungal stain than Japanese red pine. During summer storage, decay started to develop in logs and the main species were identified as Tyromyces sp. and Schizophyllum commune. Information provided in this paper would be very useful to develop more effective control strategies for sapstain prevention in Japanese red pine and Korean pine logs.

• Korean Journal of Materials Research
• /
• v.32 no.1
• /
• pp.9-13
• /
• 2022

Bullets flying with a light from the back are called "tracers". Tracers are ignited by the combustion gas of the propellant and emit bright light that allows the shooter to visually trace the flight path. Therefore, tracers mark the firing point for allies to assist shooters to hit target quickly and accurately. Conventional tracers are constructed with a mixture of an oxidizing agent, raw metal, and organic fuel. Upon ignition, the inside of the gun can be easily contaminated by the by-products, which can lead to firearm failure during long-term shooting. Moreover, there is a fire risk such as forest fires due to residual flames at impact site. Therefore, it is necessary to develop non-combustion type luminous material; however, this material must still use the heat generated from the propellant, so-called "thermoluminescence (TL)". This study aims to compare the TL emission of Dy³⁺, La³⁺ and Ho³⁺ doped MgB₄O₇ phosphors prepared by solid state reaction. The crystal structures of samples were determined by X-ray diffraction and matched with the standard pattern of MgB₄O₇. Luminescence of various doses (200 ~ 15,000 Gy) of gamma irradiated Dy³⁺, La³⁺ and Ho³⁺ (at different concentrations of 5, 10, 15 and 20 %) doped MgB₄O₇ were recorded using a luminance/color meter. The intensity of TL yellowish (CIE x = 0.401 ~ 0.486, y = 0.410 ~ 0.488) emission became stronger as the temperature increased and the total gamma-ray dose increased.